Summary
The plane state of stress in a rotating circular disk of elastic-plastic material with linear strain hardening is studied based on Tresca's yield condition and its associated flow rule. The plastic core consists of two parts with different forms of the yield condition. By specializing the results to perfectly plastic material, the usual statically determinate stress distribution is recovered but, since the plastic strain at the axis becomes infinite, these stresses are not meaningful.
Übersicht
Der ebene Spannungszustand in einer rotierenden Kreisscheibe aus elastisch-plastischem Werkstoff mit linearer Verfestigung wird berechnet unter Zugrundelegung der Trescaschen Fließbedingung und der zugehörigen Fließregel. Der plastische Kern setzt sich zusammen aus zwei Teilen, in denen die Mießbedingung verschiedene Formen annimmt. Durch Grenzwertbildung werden die Ergebnisse auf idealplastisches Verhalten spezialisiert; man findet die übliche statisch bestimmte Spannungsverteilung. Da diese aber mit unbeschränkten plastischen Dehnungen an der Scheibenachse verbunden ist, können die Spannungen nicht sinnvoll sein.
Similar content being viewed by others
References
László, F.: Geschleuderte Umdrehungskörper im Gebiet bleibender Deformation. ZAMM 5 (1925) 281–293
Nádai, A.: Theory of flow and fracture of solids, Vol. I, 2nd Ed. New York: McGraw-Hill 1950
Szabó, I.: Höhere Technische Mechanik, 4. Aufl. Berlin, Göttingen, Heidelberg, New York: Springer 1964
Johnson, W.; Mellor, P. B.: Engineering plasticity. New York: Van Nostrand-Reinhold 1973
Kollmann, F. G.: Elastisch-plastisch beanspruchte rotierende Scheiben. Kon. 32 (1980) 71–77
Gamer, U.: Tresca's yield condition and the rotating disk. J. Appl. Mech. 50 (1983) 676–678
Gamer, U.; Sayir, M.: Elastic-plastic stress distribution in the rotating solid shaft. ZAMP
Calladine, C. R.: Engineering plasticity. Oxford: Pergamon 1969
Gamer, U.: Zur elastisch-plastischen Deformation des rotierenden Kreisrings. ZAMM 63 (1983) 525–530
Gamer, U.: The Elastic-plastic stress distribution in the rotating annulus and in the annulus under external pressure. ZAMM 64 (1984)
Gamer, U.: The roating solid disk in the fully plastic state. Forsch. Ingenieurwes. 50 (1984)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gamer, U. Elastic-plastic deformation of the rotating solid disk. Ing. arch 54, 345–354 (1984). https://doi.org/10.1007/BF00532817
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00532817