Abstract
A detailed experimental study of the behaviour of grain boundaries between surface grains has been carried out on a magnesium alloy, Magnox AL 80. Different methods of assessing the strain due to grain-boundary sliding were compared; the general agreement obtained confirmed the view that, under conditions of low stress and high temperature, sliding can play a very important role in the overall deformation.
Similar content being viewed by others
References
H. Brunner andN. J. Grant,Trans. AIME 215 (1959) 48.
C. Graeme-Barber, Ph.D. thesis, University of London (1967).
A. Gittins, Ph.D. thesis, University of Melbourne (1964).
W. A. Rachinger,J. Inst. Metals 81 (1952–53) 33.
Y. Ishida, A. W. Mullendore, andN. J. Grant,Trans. AIME 233 (1965) 204.
C. Graeme-Barber andR. L. Bell,J. Inst. Metals 93 (1964–65) 551.
R. C. Gifkins, “Fracture”, edited by B. L. Averbachet al (MIT and John Wiley, 1959), p. 579.
A. Gittins, M. Eng. Sc. thesis, University of Melbourne (1962).
R. L. Bell andT. G. Langdon,J. Sci. Instr. 42 (1965) 896.
C. Zener andJ. H. Hollomon,Trans. ASM 33 (1944) 163;J. Appl. Phys. 15 (1944) 22.
S. A. Duran, private communication.
W. J. Mcg. Tegart,Acta Met. 9 (1961) 614.
R. B. Jones andJ. E. Harris,Proc. Joint Int. Conf. on Creep, Inst. Mech. Eng., London (1963), paper 15.
Idem, CEGB Report No. RD/B/R.144 (July 1963).
P. G. Shewmon andF. N. Rhines,Trans. AIME 200 (1954) 1021.
J. Weertman,J. Appl. Phys. 28 (1957) 362.
Idem, ibid 1185;Trans. AIME 218 (1960) 207.
S. J. Couling andC. S. Roberts,Trans. AIME 209 (1957) 1252.
J. W. Suiter andW. A. Wood,J. Inst. Metals. 81 (1952–53) 181.
C. S. Smith,Trans. AIME 175 (1948) 15.
A. Gittins andR. C. Gifkins,Metals Sci. J. 1 (1967) 15.
E. Czuber, “Geometrische Wahrscheinlichkeiten und Mittelwerte” (B. G. Teubner, Leipzig, 1884), p. 84.
R. A. Scriven andH. D. Williams,Trans. AIME 233 (1965) 1593.
R. L. Bell andT. G. Langdon, to be published.
R. C. Gifkins, R. L. Bell, A. Gittins, andT. G. Langdon, to be published.
A. W. Mullendore andN. J. Grant,Trans. AIME 227 (1963) 319.
P. R. Strutt, A-M Lewis, andR. C. Gifkins,J. Inst. Metals. 93 (1964–65) 71.
D. Mclean, “Mechanical Properties of Metals” (John Wiley, 1962), p. 307.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bell, R.L., Langdon, T.G. An investigation of grain-boundary sliding during creep. J Mater Sci 2, 313–323 (1967). https://doi.org/10.1007/BF00572414
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00572414