References
T. W. CLYNE,Met. Trans. 13B (1982) 471.
P. R. SAHM and P. N. HANSEN, “Numerical simulation and modelling of casting and solidification processes for foundry and cast-house” (Comité International des Associations Techniques de Fonderie, Switzerland, 1984).
K. HO and R. D. PEHLKE,AFS Trans. 91 (1983) 689.
Idem, Met. Trans.,16B (1985) 585.
N. A. EL-MAHALLAWY and A. M. ASSAR,J. Mater. Sci. Lett. 7 (1988) 205.
Y. NISHIDA, W. DROSTE and S. ENGLER,Met. Trans. 17B (1986) 833.
N. A. EL-MAHALLAWY and A. M. ASSAR,J. Mater. Sci. 26 (1991) 1729.
W. L. HERTZ and J. W. WESTWALTER,Int. J. Heat Transfer 13 (1970) 1371.
J. E. LAIT, J. K. BRIMACOMBE and F. WEINDERF,Iron Making, Steelmaking 1 (2) (1974) 90.
E. M. HIZIKAR,Trans. Met. Soc. AIME 239 (1967) 1747.
H. FRIDRIKSSON and M. THEGERSTROM,Scand. J. Metall. 8 (1979) 232.
C. S. KANETKAR and D. M. STEFANESCU, in “Modeling of casting and welding process”, Vol. IV, edited by A. F. Giamei and G. J. Abbaschian (Minerals, Metals and Materials Society, 1989).
J. T. BERRY and R. D. PEHLKE, in Proceedings of the 50th International Foundry Congress, Cairo, 6–11 November 1983.
Author information
Authors and Affiliations
Additional information
On leave from: Producting Engineering Department, Ain Shams University, Egypt.
Rights and permissions
About this article
Cite this article
Assar, AW.M. On the interfacial heat transfer coefficient for cylindrical ingot casting in a metal mould. J Mater Sci Lett 11, 601–606 (1992). https://doi.org/10.1007/BF00728622
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00728622