Summary
-
1.
A novel parameterω-the dimensionless volume fraction of particles plastically deformed during compression-has been introduced. Introduction of this parameter enables us to calculate the compression constants and the process.
-
2.
The contact pressure PK.d at zero porosity reaches the value of the absolute strength HA. This value of the material strength can be attained only if there is close contact with constructions or structures capable of withstanding the corresponding stress.
-
3.
At zero porosity the specific work divided byω- parameter PK.s-attains the hardness of the most intensively cold-worked metal.
Similar content being viewed by others
Literature cited
M. Yu. Bal'shin, Processing of Metal Powders [in Russian], Metallurgizdat (1948).
Transactions of the Conference on Heatproof Materials, No. 4 [in Russian], (1959), p. 5.
V. S.Ivanova and L. K. Gordienko, Strength Improvement [in Russian], Izd. “Nauka,” (1964).
M. Yu. Bal'shin, ZhTF,22, 686 (1952).
Yu. G. Dorofeev, Compacting of Chips [in Russian], Dnepropetrivsk (1960).
G. M. Zhdanovich, Problems in the Theory of Compression [in Russian], Minsk (1960).
M. Yu. Bal'shin, DAN SSSR, No. 1 (1964).
M. Yu. Bal'shin, DAN SSSR,67, 831 (1949).
M. Yu. Bal'shin, Collection: Powder Metallurgy [in Russian], Moscow (1964).
M. Yu. Bal'shin, Materials Consisting of Solid Alloys [in Russian], TsNIITsVETMET, Moscow (1960).
M. Yu. Bal'shin, Transactions of the Seventh Conference on Materials Produced from Powders [in Russian], Erevan (1964), p. 12.
M. Yu. Bal'shin, Metallurgy and Processing of Powders [in Russian], Erevan (1965), p. 49.
I. M. Fedorchenko and R. A. Andrievskii, Principles of Powder Metallurgy [in Russian] (1962).
Agt and Petrdlik, Kurs praskove metallurgie, Praha (1951), p. 102.
M. Yu. Bal'shin, Metal Ceramics [in Russian], Metallurgizdat (1938).
M. Yu. Bal'shin, Poroshkovaya metallurgiya, No. 4 (1964).
G. M. Zhdanovich, Transactions of the Seventh Conference on Powder Metallurgy [in Russian], Erevan (1964), p. 320.
F. Aizenkol'b, Collection: Powder Metallurgy [in Russian], Metallurgizdat (1959).
N. F. Kunin and B. D. Yurchenko, Poroshkovaya metallurgiya, No. 6 (1963).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bal'shin, M.Y. Novel principles of calculation and analysis of powder compression. Powder Metall Met Ceram 4, 975–983 (1965). https://doi.org/10.1007/BF00775441
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00775441