Abstract
Fatigue tests carried on three sets of samples having different mean grain sizes revealed that fatigue strength is a function of mean grain size of the rock. Samples having smaller grain size show higher value of fatigue strength. Graywacke samples from Flagstaff formation having mean grain sizes of 1.79 mm, 1.35 mm and 0.93 mm showed fatigue strengths of 87%, 88.25% and 89.1% respectively. Since the mean uniaxial compressive strength also varied with varying grain size, i. e. higher mean strength value for samples having finer grain size; the fatigue strength of a rock also shows a converse relation with mean uniaxial compressive strength.
Similar content being viewed by others
References
Brace, W. F. (1961): Dependence of Fracture Strength of Rocks on Grain Size. Proc. 4th Symp. Rock. Mech., Univ. Park, Penn., 99–103.
Burdin, N. T. (1963): Rock Failure under Dynamic-Loading Conditions. Soc. Pet. Eng. J.,3, 1–24.
Cain, P. J., Peng, S. S., Podnieks, E. R. (1975): Rock Fragmentation by High-Frequency Fatigue. U. S. B. M., rep. Invest, 1820, 21P.
Grover, H. J., Dehlinger, P., McClure, G. M. (1950): Investigation of Fatigue Characteristics of Rocks. Rep. Battelle Mem. Inst. Drilling Res. Inc.
Haimson, B. C., Kim, C. M. (1971): Mechanical Behaviour of Rock under Cyclic Fatigue. Proc. 13th Symp. Rock. Mech., Urbana, Illinois, p. 845–863.
Hardy, H. R., Chugh, Y. P. (1970): Failure of Geological Material under Low-Cycle Fatigue. Proc. 6th Can. Rock Mech. Sym., Montreal, p. 33–47.
Mann, J. Y. (1966): Fatigue of Materials, Melbourne University Press, London, p. 155.
Mogi, K. (1966): Some Precise Measurements of Fracture Strength of Rocks under Uniform Compressive Stress. Rock Mech. Eng. Geol.4, 41–55.
Singh, S. K. (1988): Fatigue and Strain Hardening Behaviour of Graywake from Flagstaff Formation, New South Wales. Eng. Geol. (in press):
Vutukuri, V. S., Lama, R. D., Saluja, S. S. (1978): Handbook on Mechanical Properties of Rocks (Series on Rocks and Soil Mechanics), Trans Technical Publications, Clausthal.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Singh, S.K. Relationship among fatigue strength, mean grain size and compressive strength of a rock. Rock Mech Rock Engng 21, 271–276 (1988). https://doi.org/10.1007/BF01020280
Issue Date:
DOI: https://doi.org/10.1007/BF01020280