Summary
A theory of finite deformation plasticity is developed which involves a multiplicative decomposition of the deformation gradient through the assumption that there exists a stress-free configuration which can be used to separate the elastic and plastic components of the response. By using the polar decomposition on the usual indeterminate elastic and plastic deformation tensors, two uniquely defined stress-free configurations can be identified. The structure of this theory is compared with that of a spatial theory involving the polar decomposition of the total deformation gradient. It is shown that for the special case of linear response between the stress and the elastic strain, the two theories are indistinguishable in terms of their stress responses.
Similar content being viewed by others
References
Green, A. E., Naghdi, P. M.: A general theory of an elastic-plastic continuum. Arch. Rat. Mech. Anal.18, 251–281 (1965).
Lee, E. H., Liu, D. T.: Finite-strain elastic-plastic theory particularly for plane wave analysis. J. Appl. Phys.38, 19–27 (1967).
Lee, E. H.: Elastic plastic deformation at finite strains. J. Appl. Mech.36, 1–6 (1969).
Kratochvil, J.: Finite strain theory of inelastic behavior of crystalline solids. Foundations of plasticity (Sawczuk, A., ed.), pp. 401–415. Leyden: Noordhoff 1974.
Sidoroff, F.: On the formulation of plasticity and viscoplasticity with internal variables. Arch. Mech.27, 807–819 (1975).
Kleiber, M.: Kinematics of deformation processes in materials subjected to finite elastic-plastic strains. Int. J. Eng. Sci.13, 513–525 (1975).
Lubarda, V. A., Lee, E. H.: A correct definition of elastic and plastic deformation and its computational significance. J. Appl. Mech.48, 35–40 (1981).
Loret, B.: On the effects of plastic rotation in the finite deformation of anisotropic elastoplastic materials. Mechanics of Materials2, 287–304 (1983).
Green, A. E., Naghdi, P. M.: Some remarks on elastic-plastic deformation at finite strain. Int. J. Eng. Sci.9, 1219–1229 (1971).
Casey, J., Naghdi, P. M.: A remark in the use ofF=F e F p in plasticity. J. Appl. Mech.47, 672–675 (1980).
Johnson, G. C., Bammann, D. J.: A discussion of stress rates in finite deformation problems. Int. J. Solids Struct.20, 725–737 (1984).
Besseling, J. F.: A thermodynamic approach to rheology. IUTAM Symposium on Irreversible aspects of continuum mechanics (Parkus, H., Sedov, L. I., eds.), pp. 16–53 New York: Springer 1966.
Mandel, J.: Equations constitutives et directeurs dans les milieux plastiques et viscoplastiques. Int. J. Solids Struct.9, 725–740 (1973).
Mandel, J.: Sur la definition de la vitesse de deformation elastique et sa relation avec la vitesse de constrainte. Int. J. Solids Struct.17, 873–878 (1981).
Nemat-Nasser, S.: On finite deformation elasto-plasticity. Int. J. Solids Struct.18, 857–872 (1982).
Dafalias, Y. F.: A missing link in the macroscopic constitutive formulation of large plastic deformations. Plasticity Today (Applied Science, U.D.) (Sawczuk, A., Bianchi, G., eds.), p. 135 (1984), International Symposium on Modern Trends and Results in Plasticity, Udine, Italy, June 1983.
Rice, J. R.: Continuum mechanics and thermodynamics of plasticity in relation to microscale deformation mechanisms. Constitutive Equations in Plasticity (Argon, A. S., ed.), pp. 23–79. Cambridge, Mass.: MIT Press 1975.
Asaro, R. J.: Micromechanics of crystals and polycrystals. Advances in Applied Mechanics23, 1–115 (1983).
Sidoroff, F.: The geometrical concept of intermediate configuration and elasticplastic finite strain. Arch. Mech.25, 299–308 (1973).
Author information
Authors and Affiliations
Additional information
With 1 Figure
Rights and permissions
About this article
Cite this article
Bammann, D.J., Johnson, G.C. On the kinematics of finite-deformation plasticity. Acta Mechanica 70, 1–13 (1987). https://doi.org/10.1007/BF01174643
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01174643