Abstract
A metallographic study of the tensile deformation and fracture of a commercial dual-phase steel shows that extensive plastic deformation of the martensite occurs mainly in the neck of the tensile specimen. The average load-transfer stress in martensite was roughly calculated from a shear-lag model, and it was found that it exceeds the estimated martensite yield stress value at strains corresponding to the ultimate uniform elongation, and beyond. Ductile fracture begins with void formation at martensite-ferrite interfaces, most frequently at the poles of closely spaced martensite particles situated on ferrite grain boundaries. Large inclusions and martensite banding also affect the fracture process.
Similar content being viewed by others
References
R.G. Davies:Metall. Trans. A, 1978, vol. 9A, p. 41.
R.G. Davies:Metall. Trans. A, 1978, vol. 9A, p. 671.
S.T. Milieko:J. Mat. Sci., 1969, vol. 4, p. 974.
G. Garmong and R. B. Thompson:Metall. Trans., 1973, vol. 4, p. 863.
L. F. Ramos, D. K. Matlock, and G. Krauss:Metall. Trans. A, 1979, vol. 10A, p. 259.
G. Thomas and J. Y. Koo:Structure and Properties of Dual-Phase Steels, R.A. Kot and J. W. Morris, eds., TMS-AIME, New York, NY, 1979, p. 183.
D.A. Korzekwa, R.D. Lawson, D. K. Matlock, and G. Krauss:Scripta Met., 1980, vol. 11, p. 1023.
P. Ostrom:Metall. Trans. A, 1981, vol. 12A, p. 335.
G.R. Speich and R.L. Miller:Structure and Properties of Dual-Phase Steels, R.A. Kot and J.W. Morris, eds., TMS-AIME, New York, NY, 1979, p. 145.
I. Tamura, Y. Tomita, and M. Ozawa:Proc. 3rd Int. Conf. on the Strength of Metals and Alloys, Cambridge, Inst. of Metals and Iron and Steel Inst., London, 1973, vol. 1, p. 611.
B. Karlsson and B. O. Sundstrom:Mat. Sci. and Eng., 1974, vol. 16, p. 161.
N. K. Ballinger and T. Gladman:Metal Science, 1981, vol. 15, p. 95.
J. Gerbase, J. D. Embury, and R. M. Hobbs:Structure and Properties of Dual-Phase Steels, R. A. Kot and J. W. Morris, eds., TMS-AIME, New York, NY, 1979, p. 118.
M. F. Ashby:Strengthening Methods in Crystals, A. Kelly and R. B. Nicholson, eds., John Wiley and Sons, Inc., New York, NY, 1971, p. 137.
L. M. Brown and W. M. Stobbs:Phil. Mag., 1971, vol. 23, p. 1201.
M.S. Rashid:Formable HSLA and Dual-Phase Steels, A.T. Davenport, ed., TMS-AIME, New York, NY, 1979, p. 1.
R. Stevenson:Formable HSLA and Dual-Phase Steels, A.T. Davenport, ed., TMS-AIME, New York, NY, 1979, p. 101.
N. J. Kim and G. Thomas:Metall. Trans. A, 1981, vol. 12A, p. 483.
F.S. LePera:J. Metals, 1980, vol. 32, no. 3, pp. 38–39.
P. C. Jindal and J. Gurland:The Science of Hardness Testing, ASM, Metals Park, OH, 1973, p. 59.
V.I Vladimirov and V.I. Morin:Fiz. Metal. Metalloved., 1977, vol. 44, p. 1031.
D. V. Wilson and Y. A. Konnan:Acta Met., 1964, vol. 12, p. 617.
A. Kelly:Strong Solids, Clarendon Press, Oxford, 1966, p. 189.
J. Gurland:Mat. Sci. Eng., 1979, vol. 40, pp. 59–71.
J. Gurland:Scripta Met., 1979, vol. 13, pp. 967–69.
W.C. Leslie and R.J. Sober:Trans. ASM, 1967, vol. 60, p. 499.
W.B. Morrison:Trans. ASM, 1966, vol. 59, pp. 824–46.
J. Fisher and J. Gurland:Metal Sci., 1981, vol. 15, pp. 185–92 and pp. 193-202.
A. Argon:J. Eng. Mat. Tech., 1976, vol. 98, p. 60.
D. Broek:Int. Met. Reviews, 1974, vol. 19, p. 135.
A. Melander:Mat. Sci. and Eng., 1979, vol. 39, p. 57.
Y. W. Chang and R.J. Asaro:Metal Science, 1978, vol. 12, pp. 277–84.
T. Tanaka, M. Nishida, K. Hashiguchi, and T. Kato:Structure and Properties of Dual-Phase Steels, R.A. Kot and J.W. Morris, eds., TMS-AIME, New York, NY, 1979, pp. 221–41.
A. R. Marder:Metall. Trans. A, 1982, vol. 13A, pp. 85–92.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Szewczyk, A.F., Gurland, J. A Study of the Deformation and Fracture of a Dual-Phase Steel. Metall Trans A 13, 1821–1826 (1982). https://doi.org/10.1007/BF02647838
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02647838