Skip to main content
SpringerLink
Log in

Electroless alloy/composite coatings: A review

  • Published:
Sadhana Aims and scope Submit manuscript

Abstract

Since the inception of electroless coating by Brenner & Riddell in 1946, it has been the subject of research interest and, in the past two decades, emphasis has shifted to the studies of its properties and applications. The co-deposition of paniculate matter or substance within the growing film has led to a new generation of electroless composite coatings, many of which possess excellent wear and corrosion resistance. This valuable process can coat not only electrically conductive materials including graphite but also fabrics, insulators like plastics, rubber etc. The low coating rates with these can provide better reflectivity of plated surfaces and many more applications. Coatings can be tailored for desired properties by selecting the composition of the coating alloy/composite/metallic to suit specific requirements. The market for these coatings is expanding fast as the potential applications are on the rise. In the present article, an attempt has been made to review different electroless alloy/composite coatings with respect to bath types and their composition, properties and applications. Different characterisation studies have been conducted on various electroless nickel-based coatings with emphasis on wear and corrosion properties.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Agarwala R C, Ray S 1988Z. Mettalkde. 79: 472–475

    Google Scholar 

  • Agarwala R C, Ray S 1992Z. Metallkde. 83: 203–207

    Google Scholar 

  • Agarwala R C 1987 Ph D thesis, Department of Metallurgical and Materials Engineering, University of Roorkee (presently IIT, Roorkee)

    Google Scholar 

  • Agarwala R C, Agarwala V, Singhal V 1997 Stress corrosion studies of electroless silver coating with Al-3.8 wt% Mg alloy.Proc. National Seminar on Surface Eng. Jaipur, pp 54–64

  • Agarwala R C, Agarwala V, Sharma S B 1999 Article presented at Institute Industry Interaction Meet, held on Oct. 9, 1999 at University of Roorkee (presently IIT, Roorkee), pp 32–40

  • Andre M T, Putten V, De Bakker J W G 1993J. Electrochem. Soc. 140: 2221–2228

    Article  Google Scholar 

  • Apachitei I, Duszczyk J 2000Surface Coating Technol. 132: 89–98

    Article  Google Scholar 

  • Apachitei I, Duszczyk J, Katgerman L, Overkamp P J B 1998aScr. Mater. 38: 1347–1353

    Article  Google Scholar 

  • Apachitei I, Duszyk J, Katgerman L, Overkamp P J B 1998bScr. Mater. 38: 1383–1389

    Article  Google Scholar 

  • Bakonyi I, Cziraki A, Nagy I, Hosso M 1986Z. Metallkd. 11: 425–432

    Google Scholar 

  • Balaraju J N, Sheshadri S K 1999Metal Finishing 97 (7): 8–13

    Article  Google Scholar 

  • Bangwei Z, Haowen X, Xiewen X 1999Metal Finishing 97 (10): 35–41

    Article  Google Scholar 

  • Bedingfield P B, Lewis D B, Datta P K, Gray J S, Wells P B 1991Trans. Inst. Metal Finishing 70 (1): 19–23

    Google Scholar 

  • Bin-Sudin M, Leyland A, James AS, Matthew A, Housden J, Garside B 1996Surface Coating Technol. 81 (2-3) 215–224

    Article  Google Scholar 

  • Boudrand D W 1994 Electroless plating.ASM Handbook, Surface Eng. 15: 200

    Google Scholar 

  • Bozzini B, Boniardi M 1997Z Metallkde 88: 493–497

    Google Scholar 

  • Bozzini B, Cavallotti P L 1997Scr. Mater. 36: 1245–1248

    Article  Google Scholar 

  • Bozzini B, Martin C, Cavalloti P L, Lanzoni E 1999Wear, 225: 806–813

    Article  Google Scholar 

  • Brenner A 1963Electrodeposition of alloys, principles and practice (Academic Press)

  • Brenner A, Riddell G 1946Res. Natl. US Bur. Stand. 37: 31

    Google Scholar 

  • Brenner A, Riddell G 1947Res. Natl. US Bur. Stand. 39: 389

    Google Scholar 

  • Brenner A, Couch d. E, Williams E K 1950J. Res. Nat. Bur. Stand. 44: 109

    Google Scholar 

  • Chitty J, Pertuz A, Hintermann H, Statia M H, Puchi E S 1997Thin Solid Films 308-309: 430–435

    Article  Google Scholar 

  • Cziraki A, Fogarassy B, Bakonyi I, Tompa K, Hegedns Z 1980J. Phys. (Paris) C8 (suppl.): 141

    Google Scholar 

  • Datta P K, Bedingfield P B, Lewis D B, Wells P B 1991 Structure and phase changes accompanying treatment of electroless Ni-B alloy coating.Conf. Proc. 2nd Int. Electroless Nickel Conference Solihullpp. 139–153

  • Di Giampaolo A R, Ordonez J G, Gugliemacci J M, Lira J 1997Surface Coating Technol. 89: 127–131

    Article  Google Scholar 

  • Dini J W, Coronado D R 1967Plating 38: 385

    Google Scholar 

  • Feldstein M D 1999Metal Finishing, 97: 87–90

    Article  Google Scholar 

  • Gaurilow G G 1979Chemical (electroless) nickel plating (Redhill: Porticullis)

    Google Scholar 

  • Gawne D T, Ma U 1987Wear 120: 125–149

    Article  Google Scholar 

  • Ge J P, Che R X, Wang X Z 1987Plating Surface Finishing 85: 69–73

    Google Scholar 

  • Gorbunova K M, Nikiforova A A, Sadkov G A 1966Electrochemistry (ed.) M M Melnikova, p. 41

  • Graham A H, Lindsay R W, Read H J 1965J. Electrochem. Soc. 112: 401–413

    Article  Google Scholar 

  • Graham A H, Lindsay R W, Read H J 1962J. Electrochem. Soc. 109: 1200–1201

    Article  Google Scholar 

  • Grosjean A, Rezrazi M, Tachez M 1997Surface Coating Technol. 96: 300–304

    Article  Google Scholar 

  • Gutzeit G 1959Plating Surface Finishing 46: 1158, 1275, 1377

    Google Scholar 

  • Gutzeit G 1960Plating Surface Finishing 47: 63

    Google Scholar 

  • Gutziet G, London R 1954aMet. Progr. 66: 113

    Google Scholar 

  • Gutziet G, London R 1954bPlating 41: 1416

    Google Scholar 

  • Harris S J, Overs M P, Gould A J 1985Wear 106: p. 35–52

    Article  Google Scholar 

  • Heinz G S, Heinrich K 1990Plating Surface Finishing 11: 50–54

    Google Scholar 

  • Henry J 1984aMetal Finishing 82: 17–18

    Google Scholar 

  • Henry J 1984bMetal Finishing 82: 45–47

    Google Scholar 

  • Hur K H, Jeong J H, Lee D N 1990J. Mater. Sci. 25: 2573–2584

    Article  Google Scholar 

  • Husheng G, Haicheng G, Huijiu Z 1991Wear 142: 291–301

    Article  Google Scholar 

  • Jun L, Hu X, Wang D 1996Plating Surface Finishing 83: 62–64

    Google Scholar 

  • Kim D H, Aoki K, Takano O 1995J. Electrochem. Soc. 142: 3763–3767

    Article  Google Scholar 

  • Kuo K H, Wu Y K, Liang J Z, Lai Z H 1984 InProc. 8th European Congress on Electron Microscopy Budapest (eds) A Csanady, P Rohlich, D Szabo The programme Committee, Budapest, pp. 913

    Google Scholar 

  • Kuo K H, Wu Y K, Liang J Z, Lai Z H 1985Philos. Mag., A51: 205

    Google Scholar 

  • Lanzoni E, Martini C, Ruggeri O, Bertoncello R, Glisenti A 1997European Fedration of Corrosion Publications (London: The Institute of Metals) No. 20, pp. 232–243

    Google Scholar 

  • Levy D J 1963Electrochem Technol. 1: 38

    Google Scholar 

  • Li I, Hu X, Wang D 1996Plating Surface Finishing 83: 62–64

    Google Scholar 

  • Li Y 1997Plating Surface Finishing, 84: 77–81

    Google Scholar 

  • Makhsoos E V, Thomas E L, Louis E T 1978Metall. Trans. A9: 1449

    Google Scholar 

  • Mallory G O 1974Plating 61: 1005

    Google Scholar 

  • Mallory G O 1979Products finishing magazine, reprinted courtsey Allied-Kellite Products Division (originally presented at Electroless Nickel Conference, Nov. 6–7, Cincinati, OH.)

  • Moonir-Vaghefi S M, Saatchi A, Hedjazi J 1997Z. Metallkde. 88: 498–501

    Google Scholar 

  • Narayan R, Pandey A1997 Electroless Ni PTFE composite coatings.Proc. of12th National Convention of Metallurgists and Material Scientists, at Jaipur, pp. 98–106

  • Odekerken 1996Brit. Pat. 1,041,753,U. S. Pat. 3,644,183 andDDR Pat. 41,406

  • Parker K, Shah H 1971Plating 108: 230

    Google Scholar 

  • Parker K 1972 Recent advances in electroless nickel deposits.8th Interfinish Conference Basel

  • Paunovic M, Nguyen T, Mukherjee P, Sambucetti C, Romankiw L T 1995J. Electrochem. Soc. 142: 1495–1500

    Article  Google Scholar 

  • Pearlstein F, Weightman R F, Wick R 1963Metal Finishing 61:

  • Pedraza A J. Godbole M J 1990Scr. Metall. 24: 1185–1189

    Article  Google Scholar 

  • Pena-Munoz E, Bercot P, Grosjean A, Rezrazi M, Pagetti J 1998Surface coating technol, 107: 85–93

    Article  Google Scholar 

  • Puchi E S, Statia M H, Hintermann H, Pertuz A, Chitty J 1997Thin Solid Films 290-291: 370–375

    Article  Google Scholar 

  • Ramasubramanian M, Popov B N, White R E, Chen K S 1999J. Electrochem. Soc. 146: 111–116

    Article  Google Scholar 

  • Reddy V V N, Ramamoorthy B, Keshvan Nair P 1998 Studies on electroless Ni-P/diamond composite coatings.Proc. of 18th AIMTDR Conference, IIT, Kharagpur, pp 440–444

    Google Scholar 

  • Satyanarayana K G, Agarwala R C, Agarwala V, Sharma S B 2001 Ni-P-Al2O3-Al3Zr-ZrO2: Coprecipitation of alumina-zirconia followed by co-deposition. 100/Del/2001, appeared in the Gazette of India, Part III — Sec. 2, filed for patent through CSIR, India

  • Sharma S B, Agarwala R C, Agarwala V, Satyanarana K G 2001a Characterization of carbon fabric coated with Ni-P and Ni-P-ZrO2-Al2O3 by electroless technique.J. Mater. Sci. Eng. (communicated)

  • Sharma S B, Agarwala R C, Agarwala V, Satyanarayana K G 2001b Development of electroless composite coatings by using in-situ co-precipitation followed by co-deposition ProcessActa Metall. (communicated)

  • Sharma S B, Agarwala R C, Agarwala V, Ray S 2001 cWear and friction behaviour ofNi-P-ZrO2-A l2 O3 composite electroless coatings (accepted for presentation at ICME-2001), to be held at BUET, Dhaka, during Dec. 26–28

  • Sharma S B, Agarwala R C, Agarwala V, Ray S 2002 Dry sliding wear and friction behaviour of Ni-P-ZrO2-Al2O3 composite electroless coatings on aluminium (accepted for presentation at ICOMM)

  • Srivastava A, Mohan S, Agarwala V, Agarwala RC 1992Z. Metallkd. 83: 251–253

    Google Scholar 

  • Staia M H, Castillo E J, Puchi E S, Lewis B, Hintermann H E 1996Surface Coatings Technol. 86-87: 598–602

    Article  Google Scholar 

  • Staia M H, Enriquez C, Puchi E S 1997Surface Coatings Technol. 94-95: 43–48

    Article  Google Scholar 

  • Stallman K, Speakhardt H 1981Metalloberfl. Angew. Electmchem. 35: 979

    Google Scholar 

  • Suh NP 1973Wear 25: 111–124

    Article  Google Scholar 

  • Vasudevan R, Narayanan S, Kartik P R 1998Trans. Indian Inst. Metals 51: 445–448

    Google Scholar 

  • Wang L, Zhao L, Zhang B, Liao S, OnYang Y, Hu W 1997Z. Metallkd. 88: 945–948

    Google Scholar 

  • Yugang L, Tondon K N 1996Tribol. Lett. 2: 263–272

    Google Scholar 

  • Zhang Y Z, Wu Y Y, Sun K N, Yao M 1998J. Mater. Sci. Lett. 17: 119–122

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Metallurgical and Materials Engineering Department, Indian Institute of Technology, 247 667, Roorkee, India

    R. C. Agarwala & Vijaya Agarwala

Authors
  1. R. C. Agarwala
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Vijaya Agarwala
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to R. C. Agarwala.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Agarwala, R.C., Agarwala, V. Electroless alloy/composite coatings: A review. Sadhana 28, 475–493 (2003). https://doi.org/10.1007/BF02706445

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02706445

Keywords

Search

Navigation