Impact-modified epoxy resin with glassy second component

Abstract

A resorcinol-based epoxy resin was modified by incorporating a glassy second component. The mixture showed a heterogeneous morphology with two clearly defined phases, one phase rich in oligomer, the other phase composed mainly of resorcinol epoxy resin. The fracture toughness measured asG _1c andK _1c values showed an increase from 174J m⁻² and 0.89 MN m^−1.5 S in pure epoxy resin to 431 J m⁻² and 1.36 MN m^−1.5 in 30% oligomer modified resins. The scanning electron micrographs showed that the oligomer-rich phase exhibited ductile failure behaviour and formed the dispersed phase at low concentrations while it was the continuous matrix when the concentration was 30%. Optical observations on the failure mode of thin films of the oligomer-modified epoxy resin showed the existence of both inter face failure and considerable distortion in both phase.