Abstract
Here, a solvothermal method for synthesis of porous Ni–Co binary oxide (NiCo2O4) nanorods followed by thermal decomposition is described. The prepared nanorods were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer Emmett Teller (BET) methods. These porous NiCo2O4 nanostructures were promising candidates in the development of high capacity supercapacitors and having excellent cycling performance due to high specific surface area. In addition, the influence of annealing rate on the structure and electrochemical behavior of the synthesized nanorods was investigated. The results showed that the annealing rate had a direct effect on the crystalline properties and porosity of the nanorods and influenced on their electrochemical behaviors. The nanorods prepared by the annealing rate of about 1 °C min−1 indicated a rather high capacitance of 600 F g−1; moreover, a high retention capacitance of 80 % was achieved even after 1,500 cycles at 5 A g−1.
Similar content being viewed by others
References
Liu C, Li F, Ma LP, Cheng HM (2010) Advanced materials for energy storage. Adv Mater 22:E28–E62
Yang Z, Zhang J, Kintner-Meyer MCW, Lu X, Choi D, Lemmon JP, Liu J (2011) Electrochemical energy storage for green grid. Chem Rev 11:3577–3613
Conway B (1999) Electrochemical supercapacitors: scientific fundamentals and technological applications (POD). Kluwer Academic/Plenum, New York
Simon P, Gogotsi Y (2008) Materials for electrochemical capacitors. Nat Mater 7:845–854
Zhang LL, Zhou R, Zhao XS (2010) Graphene-based materials as supercapacitor electrodes. J Mater Chem 20:5983–5992
Tian W, Wang X, Zhi C, Zhai T, Liu D, Zhang C, Golberg D, Bando Y (2013) Ni(OH)2 nanosheet @ Fe2O3 nanowire hybrid composite arrays for high-performance supercapacitor electrodes. Nano Energy 2:754–763
Wang X, Tian W, Zhai T, Zhi C, Bando Y, Golberg D (2012) Cobalt (ii, iii) oxide hollow structures: fabrication, properties and applications. J Mater Chem 22:23310–23326
Khamlich S, Bello A, Fabiane M, Ngom BD, Manyala N (2013) Hydrothermal synthesis of simonkolleite microplatelets on nickel foam-graphene for electrochemical supercapacitors. J Solid State Electrochem 17:2879–2886
Wang X, Liu S, Wang H, Tu F, Fang D, Li Y (2012) Facile and green synthesis of Co3O4 nanoplates/graphene nanosheets composite for supercapacitor. J Solid State Electrochem 16:3593–3602
Liu D, Wang X, Wang X, Tian W, Liu J, Zhi C, He D, Bando Y, Golberg D (2013) Ultrathin nanoporous Fe3O4–carbon nanosheets with enhanced supercapacitor performance. J Mater Chem A 1:1952–1955
Wang H, Gao Q, Jiang L (2011) Facile Approach to prepare nickel cobaltite nanowire materials for supercapacitors. Small 7:2454–2459
Wei W, Cui X, Chen W, Ivey DG (2011) Manganese oxide-based materials as electrochemical supercapacitor electrodes. Chem Soc Rev 40:1697–1721
Ravinder NR, Reddy GR (2004) Development of cobalt – Manganese oxide electrodes for electrochemical capacitors. J New Mater Electrochem Syst 7:317–321
Zhao GY, Xu CL, Li HL (2007) Highly ordered cobalt-manganese oxide (CMO) nanowire array thin film on Ti/Si substrate as an electrode for electrochemical capacitor. J Power Sources 163:1132–1136
Fang DL, Wu BC, Yan Y, Mao AQ, Zheng CH (2012) Synthesis and characterization of mesoporous Mn–Ni oxides for supercapacitors. J Solid State Electrochem 16:135–142
Jiang H, Ma J, Li C (2012) Hierarchical porous NiCo2O4 nanowires for high-rate supercapacitors. Chem Commun 48:4465–4467
Wei TY, Chen CH, Chien HC, Lu SY, Hu CC (2010) A Cost-effective supercapacitor material of ultrahigh specific capacitances: spinel nickel cobaltite aerogels from an epoxide-driven sol–gel process. Adv Mater 22:347–351
Wu YQ, Chen XY, Ji PT, Zhou QQ (2011) Sol–gel approach for controllable synthesis and electrochemical properties of NiCo2O4 crystals as electrode materials for application in supercapacitors. Electrochim Acta 56:7517–7522
Yokoshima K, Shibutani T, Hirota M, Sugimoto W, Murakami Y, Takasu Y (2006) Electrochemical supercapacitor behavior of nanoparticulate rutile-type Ru1−x V x O2. J Power Sources 160:1480–1486
Gupta V, Gupta S, Miura N (2008) Potentiostatically deposited nanostructured Co x Ni1−x layered double hydroxides as electrode materials for redox-supercapacitors. J Power Sources 175:680–685
Gupta V, Gupta S, Miura N (2010) Electrochemically synthesized nanocrystalline spinel thin film for high performance supercapacitor. J Power Sources 195:3757–3760
Rajagopalan T, Reddy GB (1999) Effect of annealing rate on the crystallization process in Ge5Bi18Se77 films. Thin Solid Films 353:254–258
Xie X, Li Y, Liu ZQ, Haruta M, Shen W (2009) Low-temperature oxidation of CO catalysed by Co3O4 nanorods. Nature 458:746–749
Xiao J, Yang S (2011) Sequential crystallization of sea urchin-like bimetallic (Ni, Co) carbonate hydroxide and its morphology conserved conversion to porous NiCo2O4 spinel for pseudocapacitors. RSC Advances 1:588–595
Wang D, Wang Q, Wang T (2011) Morphology-Controllable synthesis of cobalt oxalates and their conversion to mesoporous Co3O4 nanostructures for application in supercapacitors. Inorg Chem 50:6482–6492
Meher SK, Rao GR (2011) Ultralayered Co3O4 for High-performance supercapacitor applications. J Phys Chem C 115:15646–15654
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jokar, E., zad, A.I. & Shahrokhian, S. Synthesis and characterization of NiCo2O4 nanorods for preparation of supercapacitor electrodes. J Solid State Electrochem 19, 269–274 (2015). https://doi.org/10.1007/s10008-014-2592-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10008-014-2592-y