Abstract
A series of a novel class of low cure benzoxazines (BZ-1 to BZ-12) based on phenol, bisphenol-A, bisphenol-F mixture and 4, 4 isomers of bisphenol-F were synthesized using aniline, N, N-dimethyl amino propyl amine (DMAPA) and caprolactam (CPL) modified DMAPA. The molecular structure of benzoxazine monomers was characterized by 1H NMR, FT-IR, and LC mass spectrometry analysis. DSC and TGA analysis were carried out to study the polymerization process and stability of benzoxazines respectively. Among the benzoxazine systems studied, PBZ-5 is found to possess the reasonably lower cure temperature with good char yield, Tmax and Tg values. The catalytic effect on curing behavior of BZ-5 with different types of catalysts such as mono hydroxy (C1-C6), polyhydroxy (C7-C9) and acidic catalysts (C10 to C13) was studied and discussed in detail. Among the catalysts used, 4,4-thiobisphenol (C7) was found to be the most effective catalyst towards the ring opening polymerization and in turn lowers the cure temperature (amount, acidity, basicity and structural compatibility of the catalysts) than that of other catalysts (C2-C13). In addition, the catalytic behavior of starting materials (bisphenol-A and bisphenol-F) towards benzoxazines BZ-5, BZ-6, BZ-8 and BZ-9 were also studied and it can be found that bisphenol-A/F also acts as an effective catalyst which can bring down the cure exotherm to a significant extent.
Similar content being viewed by others
References
Xu H, Lu Z, Zhang G (2012) Synthesis and properties of thermosetting resin based on urushiol. RSC Adv 2:2768–2772
Shen SB, Ishida H (1996) Development and characterization of high-performance polybenzoxazine composites. Polym Composite. 17:710–719
Wang H, Wang J, He X, Feng T, Ramdani N, Luan M, Liu W, Xu X (2014) Synthesis of novel furan-containing tetrafunctional fluorene-based benzoxazine monomer and its high performance thermoset. RSC Adv 4:64798–64801
Luo F, Wu K, Lu M (2016) Enhanced thermal stability and flame retardancy of polyurethane foam composites with polybenzoxazine modified ammonium polyphosphates. RSC Adv 6:13418–13425
Sethuraman K, Alagar M (2015) Thermo-mechanical and dielectric properties of graphene reinforced caprolactam cardanol based benzoxazine–epoxy nanocomposites. RSC Adv 5:9607–9617
Revathi R, Prabunathan P, Kumar M, Alagar M (2015) Optical and thermomechanical behavior of benzoxazine functionalized ZnO reinforced polybenzoxazine nanocomposites, Polym composite. Early View, Version of Record Online. https://doi.org/10.1002/pc.23758
Vengatesan MR, Devaraju S, Dinakaran K, Alagar M (2011) Studies on thermal and dielectric properties of organo clay and octakis (dimethylsiloxypropylglycidylether) silsesquioxane filled polybenzoxazine hybrid nanocomposites. Polym Composite 32:1701–1711
Rimdusit S, Kunopast P, Dueramae I (2011) Thermomechanical properties of arylamine-based benzoxazine resins alloyed with epoxy resin. Polym Eng Sci 51:1797–1807
Selvi M, Devaraju S, Sethuraman K, Alagar M (2014) Carbon black–polybenzoxazine nanocomposites for high K dielectric applications. Polym Composite. 35:2121–2128
Rimdusit S, Jubsilpand C, Tiptipakorn S (2013) Alloys and composites of Polybenzoxazines
Rucigaj A, Alic B, Krajnc M, Sebenik U (2015) Curing of bisphenol A-aniline based benzoxazine using phenolic, amino and mercapto accelerators. Express Polym Lett 9:647–657
Yagci Y, Kiskan B, Ghosh NN (2009) Recent advancement on polybenzoxazine—a newly developed high performance thermoset. J Polym Sci Part A Polym Chem 47:5565–5576
Soto M, Hiller M, Oschkinat H, Koschek K (2016) Multifunctional Benzoxazines feature low polymerization temperature and diverse polymer structures. Polymers 8:278–291
Agag TT, Takeichi T (2003) Synthesis and characterization of novel Benzoxazine monomers containing allyl groups and their high performance thermosets. Macromolecules 36:6010–6017
Sethuraman K, Prabunathan P, Alagar M (2014) Thermo-mechanical and surface properties of POSS reinforced structurally different diamine cured epoxy nanocomposites. RSC Adv 4:45433–45441
Sethuraman K, Alagar M (2015) Thermo-mechanical and dielectric properties of graphene reinforced caprolactam cardanol based benzoxazine–epoxy nanocomposites. RSC Adv 5:9607–9617
Parameswaranpillai J, Sidhardhan SK, Jose S, Hameed N, Salim NV, Siengchin S, Pionteck J, Magueresse A, Grohens Y (2016) Miscibility, phase morphology, thermomechanical, viscoelastic and surface properties of poly (ε-caprolactone) modified epoxy systems: effect of curing agents. Ind Eng Chem Res 55:10055–10064
Kobayashi K, Yokoi Y, Komatsu T, Konishi H (2010) One-pot synthesis of 1,4-dihydro-3,1-benzoxazine-2-thiones by the reaction of 2-lithiophenyl isothiocyanates with aldehydes or ketones. Tetrahedron 66:9336–9339
Ma S, Li J, Sun Y, Zhao J, Zhao X, Yang X, Zhang L, Wang L, Zhou Z (2006) Synthesis of 1,2-dihydro-4H-3,1-benzoxazine derivatives via ZnCl2 catalyzed cyclocondensation reaction. Tetrahedron 62:7999–8005
Ishida H, Allen DJ (1996) Physical and mechanical characterization of near-zero shrinkage polybenzoxazines. J Polym Sci B Polym Phys 34:1019–1030
Ishida H, Low HY (1997) A study on the volumetric expansion of benzoxazine-based phenolic resin. Macromolecules 30:1099–1106
Rao BS, Aruna P (2013) Synthesis of bio based low temperature curable liquid epoxy, benzoxazine monomer system from cardanol: thermal and viscoelastic properties. EurPolym J 49:2365–2376
Liu J, Ishida H (2014) Anomalous isomeric effect on the properties of bisphenol F-based Benzoxazines: toward the molecular Design for Higher Performance. Macromolecules 47:5682–5690
Kolanadiyil SN, Azechi M, Endo T (2016) Synthesis of novel tri-benzoxazine and effect of phenolic nucleophiles on its ring-opening polymerization. J Polym Sci Pol Chem 54:2811–2819
Ishida H (2011) Overview and Historical Background of Polybenzoxazine Research,, chapter-1, in book: Handbook of Benzoxazine Resins. 3
Hassan HH, Elhusseiny AF, Elkony YMA, Mansour ESM (2013) Synthesis and characterization of thermally stable aromatic polyamides and poly(1,3,4-oxadiazole-amide)s nanoparticles containing pendant substituted bezamides. Chem Cent J 7:1
Ahmadizadegan H (2017) Surface modification of TiO2 nanoparticles with biodegradable nanocellolose and synthesis of novel polyimide/cellulose/TiO2 membrane. J Colloid Interface Sci 491:390–400
Levchika S, Piotrowskia A, Weilb E, Yaob Q (2005) New developments in flame retardancy of epoxy resins. Polym Degrad Stab 88:57–62
Ishida H, Rodriguez Y (1995) Catalyzing the curing reaction of a new Benzoxazine-based phenolic resin. J Appl Polym Sci 58:1751–1760
Acknowledgements
Authors wish to thank the management of VFSTR University, Vadlamudi, Guntur-522 213, AP, India for financial support to carry out this work. Authors also thank Dr. Ajay Kumar Gupta, Scientist, CoExAMMPC, VFSTR for thermal analysis of samples.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
ESM 1
(DOCX 1366 kb)
Rights and permissions
About this article
Cite this article
Hariharan, A., Srinivasan, K., Murthy, C. et al. Synthesis and characterization of a novel class of low temperature cure Benzoxazines. J Polym Res 25, 20 (2018). https://doi.org/10.1007/s10965-017-1423-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10965-017-1423-0