Abstract
Heat capacity measurements of barium tantalate (BaTa2O6) were carried out by using a differential scanning calorimeter at temperatures between 323 and 1323 K. From the heat capacity values of BaTa2O6, other thermodynamic functions (enthalpy and entropy increments) were derived between 298.15 and 1323 K. The C p,m (298.15) value of BaTa2O6 was computed as 184.857 J mol−1 K−1. Moreover, fitted heat capacities exhibited good agreement with Neumann–Kopp rule at the temperatures between 298.15 and 1300 K.
Similar content being viewed by others
References
Layden GK. Dielectric and structure studies of hexagonal BaTa2O6. Mater Res Bull. 1968;3:349.
Layden GK. Polymorphism of BaTa2O6. Mater Res Bull. 1967;2:533–9.
Smolenskii GA, Isupov VA, Agranovskaia AI. Dielectric polarization of solid solutions in system (Ba, Sr) (Ta, Nb)2O6. Sov Phys Solid State. 1959;1:909–11.
Ichinose N, Shimada T. Effect of grain size and secondary phase on microwave dielectric properties of Ba(Mg1/3Ta2/3)O3 and Ba([Mg, Zn]1/3Ta2/3)O3 systems. J Eur Ceram Soc. 2006;26:1755–9.
Lee YH, Kim YS, Kim DH, Oh MH. Conduction mechanisms in barium tantalates films and modification of interfacial barrier height. IEEE Trans Electron Devices. 2007;47:71–6.
Kato H, Kudo A. New tantalate photocatalysts for water decomposition into H2 and O2. IEEE Trans Electron Devices. 1998;295:487–92.
İlhan M. Synthesis, structure and photoluminescence properties of Ho3+ doped TTB-BaTa2O6 phosphors. Solid State Sci. 2014;38:160–8.
İlhan M, Ekmekçi MK, Mergen A, Yaman C. Synthesis and optical characterization of red-emitting BaTa2O6: Eu3+ phosphors. J Fluoresc. 2016;26:1671–8.
Vanderah TA, Roth RS, Siegrist T, Febo W, Loezos JM, Ng WW. Subsolidus phase equilibria and crystal chemistry in the system BaO–TiO2–Ta2O5. Solid State Sci. 2003;5:149–64.
Leitner J, Chuchvalec P, Sedmidubsky D, Strejc A, Abrman P. Estimation of heat capacities of solid mixed oxides. Thermochim Acta. 2003;395:27–46.
Kubaschewski O, Alcock CB, Spencer PJ. Materials thermochemistry. New York: Pergamon Press; 1993.
Moiseev GK, Sestak J. Some calculations methods for estimation of thermodynamical and thermochemical properties of inorganic-compounds. Prog Cryst Growth Ch. 1995;30:23–81.
Spencer PJ. Estimation of thermodynamic data for metallurgical applications. Thermochim Acta. 1998;314:1–21.
Kopp H. Investigations of the specific heat of solid bodies. Philos Trans Roy Soc A. 1865;155:71.
Leitner J, Vonka P, Sedmidubsky D, Svoboda P. Application of Neumann–Kopp rule for the estimation of heat capacity of mixed oxides. Thermochim Acta. 2010;497:7–13.
Constantin V, Popescu AM. The structure and heat capacity of the NaCeF4 compound. J Rare Earth. 2013;31(9):911–5.
Helgeson HC, Delany JM, Nesbitt HW, Bird DK. Summary and critique of the thermodynamic properties of rock-forming minerals. Am J Sci. 1978;A 278:1.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
İlhan, M., Mergen, A., Sarıoğlu, C. et al. Heat capacity measurements on BaTa2O6 and derivation of its thermodynamic functions. J Therm Anal Calorim 128, 707–711 (2017). https://doi.org/10.1007/s10973-016-5988-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-016-5988-3