Skip to main content
Log in

Refractive Index Sensor Based on Surface Plasmon Resonance Excitation in a D-Shaped Photonic Crystal Fiber Coated by Titanium Nitride

  • Published:
Plasmonics Aims and scope Submit manuscript

Abstract

In this paper, a plasmonic refractive index sensor using a D-shaped photonic crystal fiber coated by titanium nitride has been proposed. The interaction and interplay between fiber fundamental mode and plasmonic mode which lead to the formation of resonance peaks depending on the analyte refractive index (RI) are explained in detail. Using both spectral and amplitude sensitivity methods, the sensing performance of the proposed sensor for detecting high-index analytes is numerically investigated. The proposed PCF-SPR sensor has a RI detection range of 1.44 to 1.52 and exhibits two linear sensing regions with an average spectral sensitivity of − 16,275 nm/RIU for analyte RI ranging from 1.44 to 1.48, and − 7571 nm/RIU for analyte RI between 1.485 and 1.52, respectively. We also study the amplitude sensitivity of the proposed sensor which shows promising value of 206.25 RIU−1 for 1650-nm excitation. The proposed RI sensor is an attractive platform for detecting various high RI chemical and biochemical samples due to simple design, cost-effective plasmonic material, relatively large detection range, high sensitivity, and promising linear sensing performance.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Stockman MI (2011) Nanoplasmonics: past, present, and glimpse into future. Opt Express 19:22029–22106

    Article  Google Scholar 

  2. Maier SA (2006) Plasmonic field enhancement and SERS in the effective mode volume picture. Opt Express 14:1957–1964

    Article  Google Scholar 

  3. Merlo JM et al (2016) Wireless communication system via nanoscale plasmonic antennas. Sci Rep 6:31710

    Article  CAS  Google Scholar 

  4. Liu C, Yang L, Lu X, Liu Q, Wang F, Lv J, Sun T, Mu H, Chu PK (2017) Mid-infrared surface plasmon resonance sensor based on photonic crystal fibers. Opt Express 25:14227–14237

    Article  CAS  Google Scholar 

  5. Khalek MA, Chakma S, Ahmed K, Paul BK, Vigneswaran D, Zakaria R (2018) Materials effect in sensing performance based on surface plasmon resonance using photonic crystal fiber. Plasmonics:1–7

  6. Naik GV, Shalaev VM, Boltasseva A (2013) Alternative plasmonic materials: beyond gold and silver. Adv Mater 25:3264–3294

    Article  CAS  Google Scholar 

  7. Naik GV, Kim J, Boltasseva A (2011) Oxides and nitrides as alternative plasmonic materials in the optical range. Opt Mater Express 1:1090–1099

    Article  CAS  Google Scholar 

  8. Rifat AA et al (2016) Copper-graphene-based photonic crystal fiber plasmonic biosensor. IEEE Photon J 8(1):1–8

    Article  Google Scholar 

  9. Paul AK, Sarkar AK, Razzak SMA (2017) Graphene coated photonic crystal fiber biosensor based on surface plasmon resonance. IEEE Region 10 Humanitarian Technology Conference, Dhaka, 856-859

  10. Khalil AE, El-Saeed AH, Ibrahim MA, Hashish ME, Abdelmonem MR, Hameed MF, Azab MY, Obayy SAS (2018) Highly sensitive photonic crystal fiber biosensor based on titanium nitride. Opt Quan Electron 50(3):128

    Article  Google Scholar 

  11. Jabin MA, Ahmed K, Rana MJ, Paul BK, Islam M, Vigneswaran D, Uddin MS (2019) Surface plasmon resonance based titanium coated biosensor for cancer cell detection. IEEE Photon J 11(4):1–10

    Article  Google Scholar 

  12. Naik GV, Schroeder JL, Ni X, Kildishev AV, Sands TD, Boltasseva A (2012) Titanium nitride as a plasmonic material for visible and near-infrared wavelengths. Opt Mater Express 2:478–489

    Article  CAS  Google Scholar 

  13. Wu T, Shao Y, Wang Y, Cao S, Cao W, Zhang F, Liao C, He J, Huang Y, Hou M, Wang Y (2017) Surface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber. Opt Express 25:20313–20322

    Article  CAS  Google Scholar 

  14. Xie Q, Chen Y, Li X, Yin Z, Wang L, Geng Y, Hong X (2017) Characteristics of D-shaped photonic crystal fiber surface plasmon resonance sensors with different side-polished lengths. Appl Opt 56:1550–1555

    Article  CAS  Google Scholar 

  15. Monfared YE, Liang C, Khosravi R, Kacerovska B, Yang S (2019) Selectively toluene-filled photonic crystal fiber Sagnac interferometer for temperature sensing applications. Results in Physics 13:102297

    Article  Google Scholar 

  16. Monfared YE, Ponomarenko SA (2019) Extremely nonlinear carbon-disulfide-filled photonic crystal fiber with controllable dispersion. Opt Material 88:406–411

    Article  CAS  Google Scholar 

  17. Pflüger J, Fink J, Weber W, Bohnen KP, Crecelius G (1984) Dielectric properties of TiCx, TiNx, VCx, and VNx from 1.5 to 40 eV determined by electron-energy-loss spectroscopy. Phys Rev B 30:1155–1163

    Article  Google Scholar 

  18. Dai M et al (2019) Measurement of optical constants of TiN and TiN/Ti/TiN multilayer films for microwave kinetic inductance photon-number-resolving detectors. J Low Temp Phys 194(5–6):361–369

    Article  CAS  Google Scholar 

  19. Chu S, Nakkeeran K, Abobaker AM, Aphale SS, Babu PR, Senthilnathan K (2019) Design and analysis of surface-plasmon-resonance-based photonic quasi-crystal Fiber biosensor for high-refractive-index liquid analytes. IEEE J Sel Top Quant 25(2):1–9

    Article  Google Scholar 

  20. Luan N, Zhao L, Lian Y, Lou S (2018) A high refractive index plasmonic sensor based on D-shaped photonic crystal fiber with laterally accessible hollow-Core. IEEE Photon J 10(5):1–7

    Article  CAS  Google Scholar 

  21. Hossen MN, Ferdous M, Khalek MA, Chakma S, Paul BK, Ahmed K (2018) Design and analysis of biosensor based on surface plasmon resonance. Sensing and Bio-Sensing Research 21:1–6

    Article  Google Scholar 

  22. Shuai B, Xia L, Liu D (2012) Coexistence of positive and negative refractive index sensitivity in the liquid-core photonic crystal fiber based plasmonic sensor. Opt Express 20:25858–25866

    Article  Google Scholar 

  23. Chu S, Nakkeeran K, Abobaker AM, Aphale SS, Babu PR, Senthilnathan K (2018) A surface plasmon resonance based photonic quasi-crystal fibre biosensor with fan-shaped analyte channel for high refractive index analytes. 2018 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR), Hong Kong, 1–2

Download references

Acknowledgments

Y. M. would like to thank Dalhousie University, Optiwave Corporation, and Killam Trusts for providing resources to perform this project. The author also thanks Amir Ahmadian for proofreading the final draft.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yashar Esfahani Monfared.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Esfahani Monfared, Y. Refractive Index Sensor Based on Surface Plasmon Resonance Excitation in a D-Shaped Photonic Crystal Fiber Coated by Titanium Nitride. Plasmonics 15, 535–542 (2020). https://doi.org/10.1007/s11468-019-01072-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11468-019-01072-y

Keywords

Navigation