Abstract
LAM(Laser assisted machining) is machining method that performs a machining for workpieces using a laser preheating process. By combining the LAM and CNC lathe using laser beam, it could be named LAT (Laser Assisted Turning). A machining process in LAT has been applied at 1200∼1400°C using a specific cutting tool, after preheating a workpiece using laser beam as about 2000°C. This study performed a review on the laser assisted turning and heat treatment through classifying these technologies into three categories; the device and mechanism for establishing LAT, the machining process and heat treatment for applying LAT, and the analysis and theoretical research, which are the most important issues in LAT.
Similar content being viewed by others
Abbreviations
- Lλ :
-
Radiant energy of wavelength
- T:
-
Absolute temperature(K)
- λ:
-
Wavelength(µm)
- c1 :
-
374.15 µm4/m2
- c2 :
-
14388 µm K
References
Slocombe, A. and Li, L., “Laser ablation machining of metal/polymer composite materials,” Applied Surface Science, Vol. 154-155, pp. 617–621, 2000.
Pak, S., Kim, Y., Park, K. Y., Lee, K. D., Cheon, M. S. and Lee, H. G., “Laser welding and ablation cutting process for hydraulic connections by remote handling in the ITER diagnostic port plug,” Fusion Engineering and Design, Vol. 85, No. 2, pp. 190–196, 2010.
Melkote, S., Kumar, M., Hashimoto, F. and Lahoti, G., “Laser assisted micro-milling of hard-to-machine materials,” CIRP Annals - Manufacturing Technology, Vol. 58, No. 1, pp. 45–48, 2009.
Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P. and Shin, Y. C., “Transient, three-dimensional heat transfer model for the laser assisted machining of silicon nitride: I. Comparison of predictions with measured surface temperature histories,” International Journal of Heat and Mass Transfer, Vol. 43, No. 8, pp. 1409–1424, 2000.
Dumitrescu, P., Koshy, P., Stenekes, J. and Elbestawi, M. A., “High-power diode laser assisted hard turning of AISI D2 tool steel,” International Journal of Machine Tools and Manufacture, Vol. 46, No. 15, pp. 2009–2016, 2006.
Hirogaki, T., Nakagawa, H., Hayamizu, M., Kita, Y. and Kakino, Y., “In-situ heat treatment system for die steels using YAG laser with a machining center,” Precision Engineering, Vol. 25, No. 3, pp. 212–217, 2001.
Lee, J. H., Shin, D. S., Cho, H. Y. and Kim, K. W., “Trends of laser integrated machine,” Journal of Korean Society of Precision Engineering, Vol. 25, No. 9, pp. 701–702, 2008.
Han, S. S., “Technical materials: Temperature controlled laser hardening with high power diode laser,” Journal of the Korean Society for Heat Treatment, Vol. 20, No. 4, pp. 203–208, 2007.
Choi, S. D., Cheong, S. H., Kim, G. M., Yang, S. C. and Kim, J. G., “Characteristics of metal surface heat treatment by diode laser,” Journal of Korean Society of Manufacturing Process Engineers, Vol. 6, No. 3, pp. 16–23, 2007.
Ding, H. and Shin, Y. C., “Laser-assisted machining of hardened steel parts with surface integrity analysis,” International Journal of Machine Tools and Manufacture, Vol. 50, No. 1, pp. 106–114, 2010.
Rozzi, J. C., Pfefferkorn, F. E. and Shin, Y. C., “Experimental evaluation of the laser assisted machining of silicon nitride ceramics,” Transactions of the ASME, Vol. 122, No. 4, pp. 666–670, 2000.
Kim, T. H., “Surface modification and processing of metals by laser beam,” Bull of the Korea Inst. of Met & Mater, Vol. 5, No. 4, pp. 361–373, 1992.
Lei, S., Shin, Y. C. and Incropera, F. P., “Deformation mechanisms and constitutive modeling for silicon nitride undergoing laser-assisted machining,” International Journal of Machine Tool & Manufacture, Vol. 40, No. 15, pp. 2213–2233, 2000.
Lee, J. H., Seo, J., Shin, D. S. and Kim, S. W., “Trend of laser assisted machining,” Journal of Korea Society of Laser Processing, Vol. 10, No. 1, pp. 1–10, 2007.
Masood, S. H., Armitage, K. and Brandt, M., “An experimental study of laser-assisted machining of hard-to-wear white cast iron,” International Journal of Machine Tools and Manufacture, Vol. 51, No. 6, pp. 450–456, 2011.
Wang, Y., Yang, L. J. and Wang, N. J., “An investigation of laser-assisted machining of Al2O3 particle reinforced aluminum matrix composite,” Journal of Materials Processing Technology, Vol. 129, No. 1–3, pp. 268–274, 2002.
Zhang, C. and Shin, Y. C., “A novel laser-assisted truing and dressing technique for vitrified CBN wheels,” International Journal of Machine Tools and Manufacture, Vol. 42, No. 7, pp. 825–835, 2002.
Rebro, P. A., Shin, Y. C. and Incropera, F. P., “Design of operating conditions for crackfree laser-assisted machining of mullite,” International Journal of Machine Tools and Manufacture, Vol. 44, No. 7–8, pp. 667–694, 2004.
Tian, Y. and Shin, Y. C., “Thermal modeling for laser-assisted machining of silicon nitride ceramics with complex features,” Journal of Manufacturing Science and Engineering, Vol. 128, No. 2, pp. 425–434, 2006.
Tian, Y. and Shin, Y. C., “Laser-assisted machining of damagefree silicon nitride parts with complex geometric features via inprocess control of laser power,” Journal of American Ceramic Society, Vol. 89, No. 11, pp. 3397–3405, 2006.
Chang, C. W. and Kuo, C. P., “An investigation of laser-assisted machining of Al2O3 ceramics planning,” International Journal of Machine Tools & Manufacture, Vol. 47, No. 3–4, pp. 452–461, 2007.
Novak, J. W., Shin, Y. C. and Incropera, F. P., “Assessment of plasma enhanced machining for improved machinability of Inconel 718,” ASME Journal of Manufacturing Science and Engineering, Vol. 119, No. 1, pp. 125–129, 1997.
Leshock, C. E., Shin, Y. C. and Kim, J. N., “Plasma enhanced machining of Inconel 718: modeling of workpiece temperature with plasma heating and experimental results,” International Journal of Machine Tools and Manufacture, Vol. 41, No. 6, pp. 877–897, 2001.
Anderson, M. C. and Shin, Y. C., “Laser-assisted machining of austenitic stainless steel: P550,” Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 220, No. 12, pp. 2055–2067, 2006.
Katsamas, A. I. and Haidemenopoulos, G. N., “Laser-beam carburizing of low-alloy steels,” Surface and Cuttings Technology, Vol. 139, No. 2–3, pp. 183–191, 2001.
Kim, J. D., Kil, B. L. and Kang, W. J., “Surface transformation hardening for rod-shaped carbon steels by high power diode laser,” Journal of the Korean Society of Marine Engineering, Vol. 31, No. 8, pp. 961–969, 2007.
Choi, S. D., Cheong, S. H., Kim, G. M. and Yang, S. C., “Characteristics of metal surface heat treatment by diode laser,” The Korean Society of Manufacturing Process Engineers, Vol. 6, No. 3, pp. 16–23, 2007.
Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P. and Shin, Y. C., “Transient, three-dimensional heat transfer model for the laser assisted machining of silicon nitride: I. Comparison of predictions with measured surface temperature histories,” International Journal of Heat and Mass Transfer, Vol. 43, No. 8, pp. 1409–1424, 2000.
Lee, K. C. and Lin, J., “Transient deformation of thin metal sheets during pulsed laser forming,” Optics & Laser Technology, Vol. 34, No. 8, pp. 639–648, 2002.
Kalyon, M. and Yilbas, B. S., “Laser pulse heating: a formulation of desired temperature at the surface,” Optics and Lasers in Engineering, Vol. 39, No. 1, pp. 109–119, 2003.
Yilbas, B. S., “Laser short-pulse heating: moving heat source and convective boundary considerations,” Physica A: Statistical Mechanics and its Applications, Vol. 293, No. 1–2, pp. 157–177, 2001.
Jung, J. W. and Lee, C. M., “A study on the cutting tool and holder deformation prediction undergoing laser-assisted machining with moving heat sources,” Journal of Korean Society of Precision Engineering, Vol. 26, No. 9, pp. 127–134, 2009.
Jung, J. W., “A Study on the cutting tool and holder deformation prediction undergoing laser-assisted machining by large area analysis,” Master’s Dissertation, Department of Mechanical Design and Manufacturing Engineering, Changwon University, 2009.
Lim, S. H., “Laser-assisted machining of silicon nitride by using laser integrated machine,” Ph.D. Dissertation, Department of Technology for Manufacturing Information, Kookmin University, 2009.
Ahn, S. H. and Lee, C. M., “A study on large-area laser processing analysis in consideration of the moving heat source,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 2, pp. 285–292, 2011.
Lei, S., Shin, Y. C. and Incropera, F. P., “Deformation mechanisms and constitutive modeling for silicon nitride undergoing laser-assisted machining,” International Journal of Machine Tools & Manufacture, Vol. 40, No. 15, pp. 2213–2233, 2000.
Gogotsi, G. A. and Ostrovoy, D. Y., “Deformation and strength of engineering ceramics and single crystals,” Journal of the European Ceramic Society, Vol. 15, No. 4, pp. 271–281, 1995.
Wang, Z. C., Ridley, N. and Davies, T. J., “Strain hardening and grain elongation during superplastic deformation of ceramics,” Journal of Materials Science Letters, Vol. 14, No. 5, pp. 355–357, 1995.
Lankford, J., “High strain rate compression and plastic flow of ceramics,” Journal of Materials Science Letters, Vol. 15, No. 9, pp. 745–750, 1996.
Wang, C. M., Mitomo, M., Nishimura, T. and Bando, Y., “Grain boundary film thickness in superplastically deformed silicon nitride,” Journal of the American Ceramic Society, Vol. 80, No. 5, pp. 1213–1221, 1997.
Pfefferkorn, F. E., Lei, S., Jeon, Y. H. and Haddad, G., “A metric for defining the energy efficiency of thermally assisted machining,” International Journal of Machine Tools and Manufacture, Vol. 49, No. 5, pp. 357–365, 2009.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, KS., Kim, JH., Choi, JY. et al. A review on research and development of laser assisted turning. Int. J. Precis. Eng. Manuf. 12, 753–759 (2011). https://doi.org/10.1007/s12541-011-0100-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-011-0100-1