Skip to main content
SpringerLink
Log in

Effects of substrate temperature and deposition time on the morphology and corrosion resistance of FeCoCrNiMo0.3 high-entropy alloy coating fabricated by magnetron sputtering

  • Published:
International Journal of Minerals, Metallurgy and Materials Aims and scope Submit manuscript

Abstract

The effects of substrate temperature and deposition time on the morphology and corrosion resistance of FeCoCrNiMo0.3 coating fabricated by magnetron sputtering were investigated by scanning electron microscopy and electrochemical tests. The FeCoCrNiMo0.3 coating was mainly composed of the face-centered cubic phase. High substrate temperature promoted the densification of the coating, and the pitting resistance and protective ability of the coating in 3.5wt% NaCl solution was thus improved. When the deposition time was prolonged at 500°C, the thickness of the coating remarkably increased. Meanwhile, the pitting resistance improved as the deposition time increased from 1 to 3 h; however, further improvement could not be obtained for the coating sputtered for 5 h. Overall, the pitting resistance of the FeCoCrNiMo0.3 coating sputtered at 500°C for 3 h exceeds those of most of the reported high-entropy alloy coatings.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. B. Ren, S.J. Lv, R.F. Zhao, Z.X. Liu, and S.K. Guan, Effect of sputtering parameters on (AlCrMnMoNiZr)N films, Surf. Eng., 30(2014), No. 2, p. 152.

    CAS  Google Scholar 

  2. H. Luo, S.J. Gao, C.F. Dong, and X.G. Li, Characterization of electrochemical and passive behaviour of Alloy 59 in acid solution, Electrochim. Acta, 135(2014), p. 412.

    CAS  Google Scholar 

  3. A. Pardo, M.C. Merino, A.E. Coy, F. Viejo, R. Arrabal, and E. Matykina, Effect of Mo and Mn additions on the corrosion behaviour of AISI 304 and 316 stainless steels in H2SO4, Corros. Sci., 50(2008), p. 780.

    CAS  Google Scholar 

  4. C.O.A. Olsson and D. Landolt, Passive films on stainless steels-chemistry, structure and growth, Electrochim. Acta, 48(2003), No. 9, p. 1093.

    CAS  Google Scholar 

  5. M. Lelis, S. Tuckute, S. Varnagiris, M. Urbonavicius, G. Laukaitis, and K. Bockute, Tailoring of TiO2 film microstructure by pulsed-DC and RF magnetron co-sputtering, Surf. Coat. Technol., 377(2019), art. No. 124906.

  6. Z. He, S. Zhang, and D. Sun, Effect of bias on structure mechanical properties and corrosion resistance of TiNx films prepared by ion source assisted magnetron sputtering, Thin Solid Films, 676(2019), p. 60.

    CAS  Google Scholar 

  7. G. Greczynski, J. Lu, J. Jensen, S. Bolz, W. Kölker, C.H. Schiffers, O. Lemmer, J.E. Greene, and L. Hultman, A review of metal-ion-flux-controlled growth of metastable TiAlN by HIPIMS/DCMS co-sputtering, Surf. Coat. Technol., 257(2014), p. 15.

    CAS  Google Scholar 

  8. J.F. Yang, Z.G. Yuan, Q. Liu, X.P. Wang, and Q.F. Fang, Characterization of Mo-Al-N nanocrystalline films synthesized by reactive magnetron sputtering, Mater. Res. Bull., 44(2009), No. 1, p. 86.

    CAS  Google Scholar 

  9. U. Jansson and E. Lewin, Sputter deposition of transition-metal carbide films — A critical review from a chemical perspective, Thin Solid Films, 536(2013), p. 1.

    CAS  Google Scholar 

  10. T.Y. Zhang, J.S. Wu, L. Jin, Z. Zhang, W. Rong, B.W. Zhang, Y. Wang, Y.D. He, W. Liu, and X.G. Li, Enhancing the mechanical and anticorrosion properties of 316L stainless steel via a cathodic plasma electrolytic nitriding treatment with added PEG, J. Mater. Sci. Technol., 35(2019), No. 11, p. 2630.

    Google Scholar 

  11. P.J. Kelly and R.D. Arnell, Magnetron sputtering: A review of recent developments and applications, Vacuum, 56(2000), No. 3, p. 159.

    CAS  Google Scholar 

  12. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang, Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes, Adv. Eng. Mater., 6(2004), No. 5, p. 299.

    CAS  Google Scholar 

  13. Y. Zhang, X. Yang, and P.K. Liaw, Alloy design and properties optimization of high-entropy alloys, JOM, 64(2012), No. 7, p. 830.

    CAS  Google Scholar 

  14. Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, and Z.P. Lu, Microstructures and properties of high-entropy alloys, Prog. Mater. Sci., 61(2014), p. 1.

    Google Scholar 

  15. D.Y. Li, C.X. Li, T. Feng, Y.D. Zhang, G. Sha, J.J. Lewandowski, P.K. Liaw, and Y. Zhang, High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures, Acta Mater., 123(2017), p. 285.

    CAS  Google Scholar 

  16. C.D. Gómez-Esparza, R. Peréz-Bustamante, J.M. Alvarado-Orozco, J. Muñoz-Saldaña, R. Martínez-Sánchez, J.M. Olivares-Ramírez, and A. Duarte-Moller, Microstructural evaluation and nanohardness of an AlCoCuCrFeNiTi high-entropy alloy, Int. J. Miner. Metall. Mater., 26(2019), No. 5, p. 634.

    Google Scholar 

  17. Q.D. Qin, J.B. Qu, Y.J. Hu, Y. Wu, and X. Su, Microstructural characterization and oxidation resistance of multicomponent equiatomic CoCrCuFeNi-TiO high-entropy alloy, Int. J. Miner. Metall. Mater., 25(2018), No. 11, p. 1286.

    CAS  Google Scholar 

  18. C.B. Wei, X.H. Du, Y.P. Lu, H. Jiang, T.J. Li, and T.M. Wang, Novel as-cast AlCrFe2Ni2Ti0.5 high-entropy alloy with excellent mechanical properties, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1312.

    Google Scholar 

  19. X.H. Yan, J.S. Li, W.R. Zhang, and Y. Zhang, A brief review of high-entropy films, Mater. Chem. Phys., 210(2018), p. 12.

    CAS  Google Scholar 

  20. H. Can, C.W. Du, C.D. Dai, M. Zheng, Z.Y. Liu, and X.G. Li, Research progress of high-entropy alloy coatings, Surf. Coat., 11(2019), p. 15.

    Google Scholar 

  21. Y. Zhang, T. Han, M. Xiao, and Y. Shen, Effect of process parameters on the microstructure and properties of laser-clad FeNiCoCrTi0.5 high-entropy alloy coating, Int. J. Miner. Metall. Mater., 27(2020), p. 630.

    CAS  Google Scholar 

  22. W.L. Hsu, H. Murakami, J.W. Yeh, A.C. Yeh, and K. Shimoda, On the study of thermal-sprayed Ni0.2Co0.6Fe0.2CrSi0.2AlTi0.2 HEA overlay coating, Surf. Coat. Technol., 316(2017), p. 71.

    CAS  Google Scholar 

  23. G. Jin, Z.B. Cai, Y.J. Guan, X.F. Cui, Z. Liu, Y. Li, M.L. Dong, and D. Zhang, High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating, Appl. Surf. Sci., 445(2018), p. 113.

    CAS  Google Scholar 

  24. W.L. Hsu, Y.C. Yang, C.Y. Chen, and J.W. Yeh, Thermal sprayed high-entropy NiCo0.6Fe0.2Cr1.5SiAlTi0.2 coating with improved mechanical properties and oxidation resistance, Intermetallics, 89(2017), p. 105.

    CAS  Google Scholar 

  25. M.H. Hsieh, M.H. Tsai, W.J. Shen, and J.W. Yeh, Structure and properties of two Al-Cr-Nb-Si-Ti high-entropy nitride coatings, Surf. Coat. Technol., 221(2013), p. 118.

    CAS  Google Scholar 

  26. Z.C. Chang, Structure and properties of duodenary (TiVCrZrNb-MoHfTaWAlSi)N coatings by reactive magnetron sputtering, Mater. Chem. Phys., 220(2018), p. 98.

    CAS  Google Scholar 

  27. S.Y. Lin, S.Y. Chang, Y.C. Huang, F.S. Shieu, and J.W. Yeh, Mechanical performance and nanoindenting deformation of (AlCrTaTiZr)NCy multi-component coatings co-sputtered with bias, Surf. Coat. Technol., 206(2012), No. 24, p. 5096.

    CAS  Google Scholar 

  28. P.K. Huang and J.W. Yeh, Inhibition of grain coarsening up to 1000°C in (AlCrNbSiTiV)N superhard coatings, Scripta Mater., 62(2010), No. 2, p. 105.

    CAS  Google Scholar 

  29. C.Y. Cheng and J.W. Yeh, High-entropy BNbTaTiZr thin film with excellent thermal stability of amorphous structure and its electrical properties, Mater. Lett., 185(2016), p. 456.

    CAS  Google Scholar 

  30. Q.F. Ye, K. Feng, Z.G. Li, F.G. Lu, R.F. Li, J. Huang, and Y.X. Wu, Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating, Appl. Surf. Sci., 396(2017), p. 1420.

    CAS  Google Scholar 

  31. X.C. Li, Z.Y. Zheng, D. Dou, and J.C. Li, Microstructure and properties of coating of FeAlCuCrCoMn high entropy alloy deposited by direct current magnetron sputtering, Mater. Res., 19(2016), No. 4, p. 802.

    CAS  Google Scholar 

  32. S.B. Hung, C.J. Wang, Y.Y. Chen, J.W. Lee, and C.L. Li, Thermal and corrosion properties of V-Nb-Mo-Ta-W and V-Nb-Mo-Ta-W-Cr-B high entropy alloy coatings, Surf. Coat. Technol., 375(2019), p. 802.

    CAS  Google Scholar 

  33. S. Zhao, L.X. He, X.X. Fan, C.H. Liu, J.P. Long, L. Wang, H. Chang, J. Wang, and W. Zhang, Microstructure and chloride corrosion property of nanocrystalline AlTiCrNiTa high entropy alloy coating on X80 pipeline steel, Surf. Coat. Technol., 375(2019), p. 215.

    CAS  Google Scholar 

  34. S.C. Liang, Z.C. Chang, D.C. Tsai, Y.C. Lin, H.S. Sung, M.J. Deng, and F.S. Shieu, Effects of substrate temperature on the structure and mechanical properties of (TiVCrZrHf)N coatings, Appl. Surf. Sci., 257(2011), No. 17, p. 7709.

    CAS  Google Scholar 

  35. X.Y. Sun, X.W. Cheng, H.N. Cai, S. Ma, Z.Q. Xu, and T. Ali, Microstructure, mechanical and physical properties of FeCoNi-AlMnW high-entropy films deposited by magnetron sputtering, Appl. Surf. Sci., 507(2020), art. No. 145131.

  36. K. von Fieandt, E.M. Paschalidou, A. Srinath, P. Soucek, L. Riekehr, L. Nyholm, and E. Lewin, Multi-component (Al,Cr,Nb,Y,Zr)N thin films by reactive magnetron sputter deposition for increased hardness and corrosion resistance, Thin. Solid. Films, 693(2020), art. No. 137685.

  37. P.K. Huang and J.W. Yeh, Effects of substrate temperature and post-annealing on microstructure and properties of (AlCrNb-SiTiV)N coatings, Thin. Solid. Films, 518(2009), No. 1, p. 180.

    CAS  Google Scholar 

  38. W.B. Liao, S. Lan, L.B. Gao, H.T. Zhang, S. Xu, J. Song, X.L. Wang, and Y. Lu, Nanocrystalline high-entropy alloy (CoCrFe-NiAl0.3) thin-film coating by magnetron sputtering, Thin. Solid. Films, 638(2017), p. 383.

    CAS  Google Scholar 

  39. C.Y. Wang, X.N. Li, Z.M. Li, Q. Wang, Y.H. Zheng, Y. Ma, L.X. Bi, Y.Y. Zhang, X.H. Yuan, X. Zhang, C. Dong, and P.K. Liaw, The resistivity-temperature behavior of AlxCoCrFeNi high-entropy alloy films, Thin. Solid. Films, 700(2020), art. No. 137895.

  40. J.B. Lee, Effects of alloying elements, Cr, Mo and N on repassivation characteristics of stainless steels using the abrading electrode technique, Mater. Chem. Phys., 99(2006), No. 2–3, p. 224.

    CAS  Google Scholar 

  41. A. Pardo, M.C. Merino, A.E. Coy, F. Viejo, R. Arrabal, and E. Matykina, Pitting corrosion behaviour of austenitic stainless steels — Combining effects of Mn and Mo additions, Corros. Sci., 50(2008), No. 6, p. 1796.

    CAS  Google Scholar 

  42. K. Sugimoto and Y. Sawada, Role of alloyed molybdenum in austenitic stainless steels in the inhibition of pitting in neutral halide solutions, Corrosion, 32(1976), p. 2940.

    Google Scholar 

  43. M. Liu, X.Q. Cheng, X.G. Li, Y. Pan, and J. Li, Effect of Cr on the passive film formation mechanism of steel rebar in saturated calcium hydroxide solution, Appl. Surf. Sci., 389(2016), p. 1182.

    CAS  Google Scholar 

  44. M. Liu, X.X. Cheng, X.G. Li, Z. Jin, and H.X. Liu, Corrosion behavior of Cr modified HRB400 steel rebar in simulated concrete pore solution, Constr. Build. Mater., 93(2015), p. 884.

    Google Scholar 

  45. C.D. Dai, H. Luo, J. Li, C.W. Du, Z.Y. Liu, and J.Z. Yao, X-ray photoelectron spectroscopy and electrochemical investigation of the passive behavior of high-entropy FeCoCrNiMox alloys in sulfuric acid, Appl. Surf. Sci., 499(2020), art. No. 143903.

  46. X.L. Shang, Z.J. Wang, Q.F. Wu, J.C. Wang, J.J. Li, and J.K. Yu, Effect of Mo addition on corrosion behavior of high-entropy alloys CoCrFeNiMox in aqueous environments, Acta Metall. Sin., 32(2019), No. 1, p. 41.

    CAS  Google Scholar 

  47. T.T. Shun, L.Y. Chang, and M.H. Shiu, Age-hardening of the CoCrFeNiMo0.85 high-entropy alloy, Mater. Charact., 81(2013), p. 92.

    CAS  Google Scholar 

  48. W.H. Liu, Z.P. Lu, J.Y. He, J.H. Luan, Z.J. Wang, B. Liu, Y. Liu, M.W. Chen, and C.T. Liu, Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases, Acta Mater., 116(2016), p. 332.

    CAS  Google Scholar 

  49. Z.F. Wu, X.D. Wang, Q.P. Cao, G.H. Zhao, J.X. Li, D.X. Zhang, J.J. Zhu, and J.Z. Jiang, Microstructure characterization of AlxCo1Cr1Cu1Fe1Ni1(x=0 and 2.5) high-entropy alloy films, Alloys Compd., 609(2014), p. 137.

    CAS  Google Scholar 

  50. B.R. Braeckman, F. Boydens, H. Hidalgo, P. Dutheil, M. Jullien, A.L. Thomann, and D. Depla, High entropy alloy thin films deposited by magnetron sputtering of powder targets, Thin Solid Films, 580(2015), p. 71.

    CAS  Google Scholar 

  51. B.R. Song, Y.H. Li, Z.H. Cong, Y.X. Li, Z.X. Song, and J. Chen, Effects of deposition temperature on the nanomechanical properties of refractory high entropy TaNbHfZr films, J. Alloys Compd., 797(2019), p. 1025.

    CAS  Google Scholar 

  52. D.C. Kong, A.N. Xu, C.F. Dong, F.X. Mao, K.X. Xiao, X.G. Li, and D.D. Macdonald, Electrochemical investigation and ab initio computation of passive film properties on copper in anaerobic sulphide solutions, Corros. Sci., 116(2017), p. 34.

    CAS  Google Scholar 

  53. M. Isakhani-Zakaria, S.R. Allahkaram, and H.A. Ramezani-Varzaneh, Evaluation of corrosion behaviour of Pb-Co3O4 electrodeposited coating using EIS method, Corros. Sci., 157(2019), p. 472.

    CAS  Google Scholar 

  54. E. Huttunen-Saarivirta, V.E. Yudin, L.A. Myagkova, and V.M. Svetlichnyi, Corrosion protection of galvanized steel by polyimide coatings: EIS and SEM investigations, Prog. Org. Coat., 72(2011), No. 3, p. 269.

    CAS  Google Scholar 

  55. R.M. Fonseca, R.B. Soares, R.G. Carvalho, E.K. Tentardini, V.F.C. Lins, and M.M.R. Castro, Corrosion behavior of magnetron sputtered NbN and Nb1−xAlxN coatings on AISI 316L stainless steel, Surf. Coat. Technol., 378(2019), art. No. 124987.

  56. T.L. Zhao, Z.Y. Liu, C.W. Du, M.H. Sun, and X.G. Li, Effects of cathodic polarization on corrosion fatigue life of E690 steel in simulated seawater, Int. J. Fatigue, 110(2018), p. 105.

    CAS  Google Scholar 

  57. Z. Lukács, Evaluation of model and dispersion parameters and their effects on the formation of constant-phase elements in equivalent circuits, J. Electroanal. Chem., 464(1999), No. 1, p. 68.

    Google Scholar 

  58. A. Carnot, I. Frateur, S. Zanna, B. Tribollet, I. Dubois-Brugger, and P. Marcus, Corrosion mechanisms of steel concrete moulds in contact with a demoulding agent studied by EIS and XPS, Corros. Sci., 45(2003), p. 2513.

    CAS  Google Scholar 

  59. J.B. Jorcin, M.E. Orazem, N. Pébère, and B. Tribollet, CPE analysis by local electrochemical impedance spectroscopy, Electrochim. Acta, 51(2006), No. 8–9, p. 1473.

    CAS  Google Scholar 

  60. B. Astinchap, Fractal and statistical characterization of Ti thin films deposited by RF-magnetron sputtering: The effects of deposition time, Optik, 178(2019), p. 231.

    CAS  Google Scholar 

  61. M. Ahmadipour, M.F. Ain, S. Goutham, and Z.A. Ahmad, Effects of deposition time on properties of CaCu3Ti4O12 thin film deposited on ITO substrate by RF magnetron sputtering at ambient temperature, Ceram. Int., 44(2018), No. 15, p. 18817.

    CAS  Google Scholar 

  62. I. Petrov, P.B. Barna, L. Hultman, and J.E. Greene, Microstructural evolution during film growth, J. Vac. Sci. Technol. A, 21(2003), No. 5, p. S117.

    CAS  Google Scholar 

  63. S. Mahieu, P. Ghekiere, D. Depla, and R. De Gryse, Biaxial alignment in sputter deposited thin films, Thin Solid Films, 515(2006), No. 4, p. 1229.

    CAS  Google Scholar 

  64. T. Yamamoto, K. Fushimi, M. Seo, S. Tsuri, T. Adachi, and H. Habazaki, Depassivation-repassivation behavior of type-312L stainless steel in NaCl solution investigated by the micro-indentation, Corros. Sci., 51(2009), No. 7, p. 1545.

    CAS  Google Scholar 

  65. Y.J. Kim, S.W. Kim, H.B. Kim, C.N. Park, Y.I. Choi, and C.J. Park, Effects of the precipitation of secondary phases on the erosion-corrosion of 25% Cr duplex stainless steel, Corros. Sci., 152(2019), p. 202.

    CAS  Google Scholar 

  66. W. Zhang, M. Wang, L. Wang, C.H. Liu, H. Chang, J.J. Yang, J.L. Liao, Y.Y. Yang, and N. Liu, Interface stability, mechanical and corrosion properties of AlCrMoNbZr/(AlCrMoNbZr)N high-entropy alloy multilayer coatings under helium ion irradiation, Appl. Surf. Sci., 485(2019), p. 108.

    CAS  Google Scholar 

  67. J. Liu, H. Liu, P.J. Chen, and J.B. Hao, Microstructural characterization and corrosion behaviour of AlCoCrFeNiTix high-entropy alloy coatings fabricated by laser cladding, Surf. Coat. Technol., 361(2019), p. 63.

    CAS  Google Scholar 

  68. C.Y. Shang, E.G. Axinte, J. Sun, X.T. Li, P. Li, J.W. Du, P.C. Qiao, and Y. Wang, CoCrFeNi(W1−xMox) high-entropy alloy coatings with excellent mechanical properties and corrosion resistance prepared by mechanical alloying and hot pressing sintering, Mater. Des., 117(2017), p. 193.

    CAS  Google Scholar 

  69. Y.K. Shon, S.S. Joshi, S. Katakam, R. Shanker Rajamure, and N.B. Dahotre, Laser additive synthesis of high entropy alloy coating on aluminum: Corrosion behavior, Mater. Lett., 142(2015), p. 122.

    CAS  Google Scholar 

  70. Y.Z. Shi, B. Yang, X. Xie, J. Brechtl, K.A. Dahmen, and P.K. Liaw, Corrosion of ALxCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior, Corros. Sci., 119(2017), p. 33.

    CAS  Google Scholar 

  71. Y.J. Hsu, W.C. Chiang, and J.K. Wu, Corrosion behavior of Fe-CoNiCrCux high-entropy alloys in 3.5% sodium chloride solution, Mater. Chem. Phys., 92(2005), No. 1, p. 112.

    CAS  Google Scholar 

  72. R.F. Zhao, B. Ren, B. Cai, Z.X. Liu, G.P. Zhang, and J.J. Zhang, Corrosion behavior of CoiCrCuFeMnNi high-entropy alloys prepared by hot pressing sintered in 3.5% NaCl solution, Results Phys., 15(2019), art. No. 102667.

  73. Y.L. Chou, Y.C. Wang, J.W. Yeh, and H.C. Shih, Pitting corrosion of the high-entropy alloy Co1.5CrFeNi1.5Ti0.5Mo0.1 in chloride-containing sulphate solutions, Corros. Sci., 52(2010), No. 10, p. 3481.

    CAS  Google Scholar 

  74. P. Lu, J.E. Saal, G.B. Olson, T. Li, S. Sahu, O.J. Swanson, G.S. Frankel, A.Y. Gerard, and J.R. Scully, Computational design and initial corrosion assessment of a series of non-equimolar high entropy alloys, Scripta Mater., 172(2019), p. 12.

    CAS  Google Scholar 

  75. Z.H. Han, W.N. Ren, J. Yang, A.L. Tian, Y.Z. Du, G. Liu, R. Wei, G. Zhang, and Y.Q. Chen, The corrosion behavior of ultra-fine grained CoNiFeCrMn high-entropy alloys, J. Alloys Compd., 816(2020), art. No. 152583.

  76. T.S. Li, O.J. Swanson, G.S. Frankel, A.Y. Gerard, P. Lu, J.E. Saal, and J.R. Scully, Localized corrosion behavior of a singlephase non-equimolar high entropy alloy, Electrochim. Acta, 306(2019), p. 71.

    CAS  Google Scholar 

Download references

Acknowledgement

This work was financially supported by the National Science and Technology Major Project of China (No. 2017-VII-0012-0109).

Author information

Authors and Affiliations

  1. Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing, 100083, China

    Chun-duo Dai, Yu Fu, Jia-xiang Guo & Cui-wei Du

  2. Key Laboratory for Corrosion and Protection, Ministry of Education, Beijing, 100083, China

    Chun-duo Dai, Yu Fu, Jia-xiang Guo & Cui-wei Du

  3. Beijing Advanced Innovation Center for Materials Genome Engineering, University of Science and Technology Beijing, Beijing, 100083, China

    Cui-wei Du

Authors
  1. Chun-duo Dai
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yu Fu
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jia-xiang Guo
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Cui-wei Du
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Cui-wei Du.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Dai, Cd., Fu, Y., Guo, Jx. et al. Effects of substrate temperature and deposition time on the morphology and corrosion resistance of FeCoCrNiMo0.3 high-entropy alloy coating fabricated by magnetron sputtering. Int J Miner Metall Mater 27, 1388–1397 (2020). https://doi.org/10.1007/s12613-020-2149-2

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12613-020-2149-2

Keywords

Search

Navigation