Abstract
An optical fiber bi-directional strain sensor principled on Mach–Zenhder interferometer is fabricated and demonstrated, a sensing segment no-core fiber of 125 μm diameter both ends fused with a couple of single-mode fibers then bi-directionally strained, the achieved sensitivity was around 16.37 pm με−1, the sensor is excellently repeatable with a very good mechanical toughness; to the best of our knowledge, this is the best strain sensitivity reported in no-core fiber strain sensors. The sensor can be employed in a wide variety of opto-mechanical monitoring applications in different industrial facilities.
Similar content being viewed by others
Change history
10 January 2024
This article has been retracted. Please see the Retraction Notice for more detail: https://doi.org/10.1007/s13204-024-03017-2
References
Alhayani B, Abdallah AA (2020) Manufacturing intelligent Corvus corone module for a secured two way image transmission under WSN. Eng Comput. https://doi.org/10.1108/EC-02-2020-0107
Alhayani B, Abbas ST, Mohammed HJ et al (2021) Intelligent secured two-way image transmission using corvus corone module over WSN. Wireless Pers Commun. https://doi.org/10.1007/s11277-021-08484-2
Alhayani BSA, Ilhan H (2021) Visual sensor intelligent module based image transmission in industrial manufacturing for monitoring and manipulation problems. J Intell Manuf 32:597–610. https://doi.org/10.1007/s10845-020-01590-1
Al-Hayani B, Ilhan H (2020) Efficient cooperative image transmission in one-way multi-hop sensor network. Int J Electr Eng Educ 57(4):321–339
Alsweefe H, Al-Hayali SK, Al-Janabi A (2018) Efficient humidity sensor based on an etched no-core fiber coated with copper oxide nanoparticles. J Nanophoton 12(04):1. https://doi.org/10.1117/1.jnp.12.046018
Amorebieta J (2021) Compact omnidirectional multicore fiber-based vector bending sensor. Sci Rep. https://doi.org/10.1038/s41598-021-85507-9
Campanella C, Cuccovillo A, Campanella C, Yurt A, Passaro V (2018) Fibre bragg grating based strain sensors: review of technology and applications. Sensors 18(9):3115. https://doi.org/10.3390/s18093115
Datta A, Saha A (2020) Multimode interference-based highly sensitive strain sensor by illuminating with a Bessel-Gauss beam. In: Third international conference on inventive material science applications: ICIMA 2020. Doi: https://doi.org/10.1063/5.0026215
Dong X, Du H, Sun X, Luo Z, Duan J (2018) A novel strain sensor with large measurement range based on all fiber Mach-Zehnder interferometer. Sensors 18(5):1549. https://doi.org/10.3390/s18051549
Dong L, Gang T, Bian C, Tong R, Wang J, Hu M (2020) A high sensitivity optical fiber strain sensor based on hollow core tapering. Opt Fiber Technol 56:102179. https://doi.org/10.1016/j.yofte.2020.102179
Fan R (2019) Practical research on photonic crystal fiber micro-strain sensor. Opt Fiber Technol 52:101959. https://doi.org/10.1016/j.yofte.2019.101959
Feng W, Yang X, Yu J, Yue Z (2020) Strain and temperature sensor based on fiber Bragg grating cascaded bi-tapered four-core fiber Mach-Zehnder interferometer. J Phys D: Appl Phys 53(46):465104. https://doi.org/10.1088/1361-6463/aba974
Hasan HS, Alhayani B et al (2021) Novel unilateral dental expander appliance (udex): a compound innovative materials. Comput Mater Contin 68(3):3499–3511. https://doi.org/10.32604/cmc.2021.015968
Hassan MA, Al-Nedawe BM, Fakhri MA (2021) Embedded optical fiber link interferometer sensors for snapshot surface inspection using the synthetic wavelength technique. Appl Opt 60(8):2339. https://doi.org/10.1364/ao.417370
Huang Y (2017) A highly sensitive intensity-modulated optical fiber magnetic field sensor based on the magnetic fluid and multimode interference. J Sens 2017:1–7. https://doi.org/10.1155/2017/9573061
Janik M, Koba M, Celebańska A, Bock WJ, Śmietana M (2018) Live E. coli bacteria label-free sensing using a microcavity in-line Mach-Zehnder interferometer. Sci Rep. https://doi.org/10.1038/s41598-018-35647-2
Kwekha-Rashid AS, Abduljabbar HN, Alhayani B (2021) Coronavirus disease (COVID-19) cases analysis using machine-learning applications. Appl Nanosci. https://doi.org/10.1007/s13204-021-01868-7
Lee S, Song H, Ahn H, Kim S, Choi J, Kim K (2021) Fiber-optic localized surface plasmon resonance sensors based on nanomaterials. Sensors 21(3):819. https://doi.org/10.3390/s21030819
Lian X, Wu Q, Farrell G, Semenova Y (2020) High-sensitivity temperature sensor based on anti-resonance in high-index polymer-coated optical fiber interferometers. Opt Lett 45(19):5385. https://doi.org/10.1364/ol.403050
Ma L, Qi Y, Kang Z, Jian S (2014) All-fiber strain and curvature sensor based on no-core fiber. IEEE Sens J 14(5):1514–1517. https://doi.org/10.1109/jsen.2014.2298553
Di Sante R (2015) Fibre optic sensors for structural health monitoring of aircraft composite structures: recent advances and applications. Sensors 15(8):18666–18713. https://doi.org/10.3390/s150818666
Selokar T, Giraldi MTR (2021) All-fiber sensors for salinity and temperature simultaneous measurement. Opt Quant Electron. https://doi.org/10.1007/s11082-020-02678-x
Shiratsuchi T, Imai T (2021) Development of fiber Bragg grating strain sensor with temperature compensation for measurement of cryogenic structures. Cryogenics 113:103233. https://doi.org/10.1016/j.cryogenics.2020.103233
Sun Y (2017) Dual-parameters optical fiber sensor with enhanced resolution using twisted MMF based on SMS structure. IEEE Sensors J 17(10):3045–3051. https://doi.org/10.1109/jsen.2017.2673959
Wang Y (2020) Simultaneous measurement of temperature and strain based on a hollow core Bragg fiber. Opt Lett 45(22):6122. https://doi.org/10.1364/ol.403722
Xing R, Dong C, Wang Z, Wu Y, Yang Y, Jian S (2018) Simultaneous strain and temperature sensor based on polarization maintaining fiber and multimode fiber. Opt Laser Technol 102:17–21. https://doi.org/10.1016/j.optlastec.2017.12.013
Xiong L, Guo Y, Jiang G, Zhou X, Jiang L, Liu H (2021) Six-Dimensional force/torque sensor based on fiber bragg gratings with low coupling. IEEE Trans Ind Electron 68(5):4079–4089. https://doi.org/10.1109/tie.2020.2982107
Yahya W, Ziming K, Juan W et al (2021) Study the influence of using guide vanes blades on the performance of cross-flow wind turbine. Appl Nanosci. https://doi.org/10.1007/s13204-021-01918-0
Yan S-C, Zhao Y, Chen M-Q, Liu Q (2020) Optical fiber strain sensor with double S-tapers. Instrum Sci Technol 49(3):313–326. https://doi.org/10.1080/10739149.2020.1840387
Yang F, Wang ZK, Wang DN (2019) A highly sensitive optical fiber strain sensor based on cascaded multimode fiber and photonic crystal fiber. Opt Fiber Technol 47:102–106. https://doi.org/10.1016/j.yofte.2018.11.029
Zakaria R, Zainuddin NM, Ahmad Fahri MAS, Thirunavakkarasu PM, Patel SK, Harun SW (2021) High sensitivity refractive index sensor in long-range surface plasmon resonance based on side polished optical fiber. Opt Fiber Technol 61:102449. https://doi.org/10.1016/j.yofte.2020.102449
Zhang C (2019) An optical fiber strain sensor by using of taper based TCF structure. Opt Laser Technol 120:105687. https://doi.org/10.1016/j.optlastec.2019.105687
Zhang S (2020) High-sensitivity strain and temperature simultaneous measurement sensor based on multimode fiber chirped long-period grating. IEEE Sens J 20(24):14843–14849. https://doi.org/10.1109/jsen.2020.3010071
Zhang Y (2021) Vibration sensor based on hollow biconical fiber. Sensors 21(4):1023. https://doi.org/10.3390/s21041023.
Zhang C, Xu S, Zhao J, Li H, Bai H, Miao C (2017) Multipoint refractive index and temperature fiber optic sensor based on cascaded no core fiber-fiber Bragg grating structures. Opt Eng 56(2):027102. https://doi.org/10.1117/1.oe.56.2.027102
Zhao Y, Zhao J, Zhao Q (2020) Review of no-core optical fiber sensor and applications. Sens Actuators A 313:112160. https://doi.org/10.1016/j.sna.2020.112160
Zhu X (2021) A novel optical fiber sensor based on microfiber Mach-Zehnder interferometer with two spindle-shaped structures. IEEE Photonics J 13(2):1–9. https://doi.org/10.1109/jphot.2021.3065668
Acknowledgements
This work is supported by the ministry of higher education and scientific research and university of Baghdad.
Funding
This study was self- funded.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflicts of interest
There are no conflicts of interest. All authors declare, have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
This article has been retracted. Please see the retraction notice for more detail: https://doi.org/10.1007/s13204-024-03017-2
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Hasan, M.M., Taher, H.J. RETRACTED ARTICLE: Optical fiber bi-directional strain sensor based on coreless fiber. Appl Nanosci 13, 1225–1233 (2023). https://doi.org/10.1007/s13204-021-01983-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13204-021-01983-5