Abstract
Power transformers are the most significant component of power system. Traditionally mineral oils are used as insulating fluid in power transformers. In this work, an effort has been made to investigate the performance of alternate insulating fluids like ester and silicone oil. The technical stability of these insulating fluids, their mixtures is analyzed. Deterioration of solid insulation in presence of ester oil is examined using scanning electron microscope (SEM) and X-ray diffraction techniques (XRD).
Similar content being viewed by others
References
I. Fofana, V. Wasserberg, H. Borsi, E. Gocenbach, Challenges of mixed insulating liquids for use in high voltage transformers, Part 1: investigation of mixed liquids. IEEE Electr. Insul. Mag. 18, 18–31 (2002)
I. Fofana, A. Bouaicha, M. Farzaneh, J. Sabau, D. Busieres, E.B. Robertson, Decay products in the insulation of power transformers. IET Electr. Power Appl. 4(3), 177–184 (2010)
C. Perrier, A. Beroual, Experimental investigations on insulating liquids for power transformers: mineral, ester and silicone oil. IEEE Electr. Insul. Mag. 25(6), 6–13 (2009)
K.J. Rapp, C.P. Mcshane, J. Luksich, Interaction mechanisms of natural dielectric fluid and kraft paper, in IEEE International Conference of Dielectric Liquids, Coimbra, pp. 393–396, July 2005
C.P. McShane, K.J. Rapp, J.L. Corkran, G.A. Gauger, J. Luksich, Aging of paper insulation in natural ester dielectric fluid. IEEE Transm. Distrib. Conf. Expos. 2, 675–679 (2001)
L. Yang, R. Liao, S. Caixin, M. Zhu, Influence of vegetable oil on the thermal ageing of transformer paper and its mechanism. IEEE Trans. Dielectr. Electr. Insul. 18(3), 692–700 (2011)
R. Liao, C. Tang, L. Yang, S.G. Bowski, Thermal ageing micro-scale analysis of power transformer pressboard. IEEE Trans. Dielectr. Electr. Insul. 15(5), 1281–1287 (2008)
T.V. Oommen, Vegetable oils for liquid-filled transformers. IEEE Electr. Insul. Mag. 18, 6–11 (2002)
T.O. Rouse, Mineral insulating oil in transformers. IEEE Electr. Insul. Mag. 14(03), 6–16 (1998)
IS6792 Methods for Determination of Electrical Strength of Insulating Oil
STMD3828, Standard Test Methods for Determining Flash Points, Fire Points for Oil
ASTMD 2162-06, IP 70 Standard Test Methods and Protection Rating for Determining Viscosity of Oil
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Karthik, R., Renga Raja, T.S., Shunmugam, S.S. et al. Performance Evaluation of Ester Oil and Mixed Insulating Fluids. J. Inst. Eng. India Ser. B 93, 173–178 (2012). https://doi.org/10.1007/s40031-012-0027-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40031-012-0027-7