Abstract
The dissimilar combinations of Inconel 625 and duplex stainless steel SAF 2205 obtained from manual GTA welding process employing ER2209 and ERNiCrMo-3 filler metals have been investigated. Formation of secondary phases at the HAZ of Inconel 625 and grain coarsening at the HAZ of SAF 2205 were witnessed while using these filler wires. The average hardness of ER2209 weldments was found to be greater than ERNiCrMo-3 weld. Tensile fracture was observed at the weld zones for both the fillers. Impact test trials showed brittle mode of fracture on employing ER2209 filler and mixed (ductile–brittle) mode of fracture while using ERNiCrMo-3 filler. Further optical microscopy and SEM/EDS analysis were carried out across the weldments to investigate the structure–property relationships.
Similar content being viewed by others
References
X.Q. Wu, H.M. Jing, Z.M. Zheng, Z.M. Yao, W. Ke, Z.Q. Hu, Mater. Sci. Eng. A 293, 252 (2000)
F. Wang, D. Northwood, Mater. Charact. 31, 3 (1993)
M. Blair, T.L. Stevens, Steel Casting Handbook (Steel Founders Society of America and ASM International, Materials Park, 2000), pp. 1–13
M.J. Donachie, S.J. Donachie, Superalloys: a Technical Guide (ASM International, Materials Park, 2002), pp. 10–30
J.R. Daris, ASM Handbooks (ASM International, Materials Park, 1999), pp. 18–23
J.C. Lippold, Weld. J. 62, 91 (1983)
M. van Wijngaarden, J. Chater, Stainless Steel World, 42 (2006)
H. Naffakh, M. Shamanian, F. Ashrafizadeh, J. Mater. Process. Technol. 209, 3628 (2009)
H. Shah Hosseini, M. Shamanian, A. Kermanpur, Mater. Charact. 62, 425 (2011)
R. Dehmolaei, M. Shamanian, A. Kermanpur, Mater. Charact. 59, 1447 (2008)
H.T. Lee, S.L. Jeng, C.H. Yen, T.Y. Kuo, J. Nucl. Mater. 335, 59 (2004)
D.J. Lee, Y.S. Kim, Y.T. Shin, E.C. Jeon, S.H. Lee, H.J. Lee, S.K. Lee, J.H. Lee, H.W. Lee, Metall. Mater. Int. 16, 813 (2010)
G. Belloni, G. Caironi, A. Gariboldi, A. Lo Conte, P. di Milano, Trans. SMiRT 16, 1546 (2001)
J.R. Crum, L.E. Shoemaker, S.D. Kiser, Special alloys and overmatching welding products solve FGD corrosion problems. Special Metals Welding Products, Technical Paper
J. Dupont, J. Lippold, S. Kiser, Welding Metallurgy and Weldability of Nickel-Base alloys (Wiley, New York, 2009)
J.N. DuPont, C.V. Robino, A.R. Marder, M.R. Notis, J.R. Michael, Metall. Mater. Trans. A 29, 2785 (1998)
J.N. DuPont, C.V. Robino, A.R. Marder, Metall. Mater. Trans. A 29, 2797 (1998)
I. Gowrisankar, A.K. Bhaduri, V. Seetharaman, D.D.N. Verma, D.R.G. Achar, Weld. J. 66, 147s (1987)
C. Vernot-Loier, F. Cortial, Superalloy 718/625 (TMS, Warrendale, 1991), p. 409
Author information
Authors and Affiliations
Corresponding author
Additional information
Available online at http://link.springer.com/journal/40195
Rights and permissions
About this article
Cite this article
Sridhar, R., Ramkumar, K.D. & Arivazhagan, N. Characterization of Microstructure, Strength, and Toughness of Dissimilar Weldments of Inconel 625 and Duplex Stainless Steel SAF 2205. Acta Metall. Sin. (Engl. Lett.) 27, 1018–1030 (2014). https://doi.org/10.1007/s40195-014-0116-5
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-014-0116-5