Skip to main content
SpringerLink
Log in

Application of Machine Learning for Temperature Prediction in a Test Road in Alberta

  • Original Research Paper
  • Published:
International Journal of Pavement Research and Technology Aims and scope Submit manuscript

This article has been updated

Abstract

Pavement temperature prediction plays a key role in determining the structural capacity and deflection of asphalt pavement, owing to the viscoelastic behavior of asphalt. Thus, a high degree of accuracy is desirable for the prediction of asphalt temperature from available parameters such as air temperature and solar radiation. Asphalt temperature prediction models can be based on different approaches, including analytical, numerical, and statistical methods. Each of these models has its own strengths and weaknesses, and their accuracy varies based on site conditions. The goal of this research is to compare the accuracy of machine learning approach in general with existing models for prediction of temperature in asphalt pavements, based on 6 years of data collected from temperature sensors embedded in an instrumented test road in Alberta. A sensitivity analysis was performed to determine the most important parameters for prediction of temperature, and MATLAB regression learner was used for implementing machine learning-based algorithms based on parameters, which were determined to be air temperature, solar radiation, and day of the year. The machine learning methods were compared with existing literature models for prediction of average, minimum, and maximum daily pavement temperatures at different depths throughout the asphalt layer. The predicted results were validated by comparison with available field data. All machine learning algorithms used in this study resulted in the prediction of temperature values with higher accuracy compared to existing models, demonstrating the applicability of these machine learning models for improved pavement temperature prediction.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

Change history

  • 29 May 2021

    The author portraits and biographies have been interchanged and adjusted.

References

  1. Elseifi, M. A., Al-Qadi, I. L., Asce, F., & Yoo, P. J. (2006). Viscoelastic modeling and field validation of flexible pavements. Journal of Engineering Mechanics, 132, 172–178. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:2(172)

    Article  Google Scholar 

  2. Elseifi, M. A., Dessouky, S. H., Al-Qadi, I. L., & Yang, S. H. (2006). Viscoelastic model to describe mechanical response of bituminous sealants at low temperature. Transportation Research Record, 1958, 82–89. https://doi.org/10.1177/0361198106195800110

    Article  Google Scholar 

  3. Diefenderfer, B. K., Al-Qadi, I. L., & Diefenderfer, S. D. (2006). Model to predict pavement temperature profile: Development and validation. Journal of Transportation Engineering, 132, 162–167. https://doi.org/10.1061/(ASCE)0733-947X(2006)132:2(162)

    Article  Google Scholar 

  4. Shafiee, M. H., Hashemian, L., Rostami, A., & Bayat, A. (2018). Field measurement and modeling of vertical and longitudinal strains from falling weight deflectometer testing. Journal of Transportation Engineering Part B: Pavement, 144, 1–9. https://doi.org/10.1061/JPEODX.0000022

    Article  Google Scholar 

  5. Alavi, M. Z., Pouranian, M. R., & Hajj, E. Y. (2014). Prediction of asphalt pavement temperature profile with finite control volume method. Transportation Research Record, 2456, 96–106. https://doi.org/10.3141/2456-10

    Article  Google Scholar 

  6. Barber, E. S. (1957). Calculation of maximum pavement temperatures from weather reports. Highway Research Board Bulletin, 168, 1–8

    Google Scholar 

  7. Wang, D., & Roesler, J. R. (2014). One-dimensional temperature profile prediction in multi-layered rigid pavement systems using a separation of variables method. International Journal of Pavement Engineering, 15, 373–382. https://doi.org/10.1080/10298436.2011.653358

    Article  Google Scholar 

  8. Wang, D. (2015). Simplified analytical approach to predicting asphalt pavement temperature. Journal of Materials in Civil Engineering, 27, 1–7. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000826

    Article  Google Scholar 

  9. Chen, J., Li, L., & Wang, H. (2015). Analytical prediction and field validation of transient temperature field in asphalt pavements. Journal of Central South University of Technology, 22, 4872–4881. https://doi.org/10.1007/s11771-015-3039-z

    Article  Google Scholar 

  10. Qin, Y. (2016). Pavement surface maximum temperature increases linearly with solar absorption and reciprocal thermal inertial. International Journal of Heat and Mass Transfer, 97, 391–399. https://doi.org/10.1016/j.ijheatmasstransfer.2016.02.032

    Article  Google Scholar 

  11. Hermansson, A. (2004). Mathematical model for paved surface summer and winter temperature: Comparison of calculated and measured temperatures. Cold Regions Science and Technology, 40, 1–17. https://doi.org/10.1016/j.coldregions.2004.03.001

    Article  Google Scholar 

  12. Minhoto, M. J. C., Pais, J. C., Pereira, P. A. A., & Picado-Santos, L. G. (2005). Predicting asphalt pavement temperature with a three-dimensional finite element method. Transportation Research Record, 1919, 96–110. https://doi.org/10.1177/0361198105191900111

    Article  Google Scholar 

  13. Ho, C. H., & Romero, P. (2009). Low design temperatures of asphalt pavements in dry–freeze regions: Predicting by means of solar radiation. Transportation Research Record, 2127, 60–71. https://doi.org/10.3141/2127-08

    Article  Google Scholar 

  14. Han, R., Jin, X., & Glover, C. J. (2011). Modeling pavement temperature for use in binder oxidation models and pavement performance prediction. Journal of Materials in Civil Engineering, 23, 351–359. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000169

    Article  Google Scholar 

  15. Islam, R., Ahsan, S., & Tarefder, R. A. (1997). Modeling temperature profile of hot-mix asphalt in flexible pavement. International Journal of Pavement Research and Technology, 8, 47–52. https://doi.org/10.6135/ijprt.org.tw/2015.8(1).47

    Article  Google Scholar 

  16. Park, D. Y., Buch, N., & Chatti, K. (2001). Model and temperature correction via falling weight deflectometer deflections. Transportation Research Record, 1764, 97–111. https://doi.org/10.3141/1764-11

    Article  Google Scholar 

  17. Asefzadeh, A., Hashemian, L., & Bayat, A. (2017). Development of statistical temperature prediction models for a test road in Edmonton, Alberta, Canada. International Journal of Pavement Research and Technology, 10, 369–382. https://doi.org/10.1016/j.ijprt.2017.05.004

    Article  Google Scholar 

  18. Li, Y., Liu, L., & Sun, L. (2018). Temperature predictions for asphalt pavement with thick asphalt layer. Construction and Building Materials, 160, 802–809. https://doi.org/10.1016/j.conbuildmat.2017.12.145

    Article  Google Scholar 

  19. Chen, J., Wang, H., & Xie, P. (2019). Pavement temperature prediction: Theoretical models and critical affecting factors. Applied Thermal Engineering, 158, 113755. https://doi.org/10.1016/j.applthermaleng.2019.113755

    Article  Google Scholar 

  20. Dumais, S., & Doré, G. (2016). An albedo based model for the calculation of pavement surface temperatures in permafrost regions. Cold Regions Science and Technology, 123, 44–52. https://doi.org/10.1016/j.coldregions.2015.11.013

    Article  Google Scholar 

  21. Park, J. J., Shin, E. C., & Yoon, B. J. (2016). Development of frost penetration depth prediction model using field temperature data of asphalt pavement. International Journal of Offshore and Polar Engineering, 26, 341–347. https://doi.org/10.17736/ijope.2016.tm79

    Article  Google Scholar 

  22. Islam, M. R., Ahsan, S., & Tarefder, R. A. (2015). Modeling temperature profile of hot-mix asphalt in flexible pavement. International Journal of Pavement Research and Technology, 8, 47–52. https://doi.org/10.6135/ijprt.org.tw/2015.8(1).47

    Article  Google Scholar 

  23. Abo-Hashema, M. A. (2013). Modeling pavement temperature prediction using artificial neural networks. In I. L. Al-Qadi & S. Murrell (Eds.), Airfield and highway pavement 2013: Sustainable and efficient pavements. (pp. 490–505). ASCE. https://doi.org/10.1061/9780784413005.039

    Chapter  Google Scholar 

  24. Kargah-Ostadi, N., & Stoffels, S. M. (2015). Framework for development and comprehensive comparison of empirical pavement performance models. Journal of Transportation Engineering, 141(8), 04015012. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000779

    Article  Google Scholar 

  25. Yang, C. H., Yun, D. G., Kim, J. G., Lee, G., & Kim, S. B. (2020). Machine learning approaches to estimate road surface temperature variation along road section in real-time for winter operation. International Journal of Intelligent Transportation Systems Research, 18, 343–355. https://doi.org/10.1007/s13177-019-00203-3

    Article  Google Scholar 

  26. Moghaddam, T. B., Soltani, M., Shahraki, H. S., Shamshirband, S., Noor, N. B. M., & Karim, M. R. (2016). The use of SVM-FFA in estimating fatigue life of polyethylene terephthalate modified asphalt mixtures. Measurement, 90, 526–533. https://doi.org/10.1016/j.measurement.2016.05.004

    Article  Google Scholar 

  27. Xu, B., Dan, H., & Li, L. (2017). Temperature prediction model of asphalt pavement in cold regions based on an improved BP neural network. Applied Thermal Engineering, 120, 568–580. https://doi.org/10.1016/j.applthermaleng.2017.04.024

    Article  Google Scholar 

  28. Majidifard, H., Jahangiri, B., Buttlar, W. G., & Alavi, A. H. (2019). New machine learning-based prediction models for fracture energy of asphalt mixtures. Measurement, 135, 438–451. https://doi.org/10.1016/j.measurement.2018.11.081

    Article  Google Scholar 

  29. Marcelino, P., Antunes, M. L., Fortunato, E., & Gomes, M. C. (2019). Machine learning approach for pavement performance prediction. International Journal of Pavement Engineering, 22, 341–354. https://doi.org/10.1080/10298436.2019.1609673

    Article  Google Scholar 

  30. Gong, H., Sun, Y., Dong, Y., Han, B., Polaczyk, P., Hu, W., & Huang, B. (2020). Improved estimation of dynamic modulus for hot mix asphalt using deep learning. Construction and Building Materials, 263, 119912. https://doi.org/10.1016/j.conbuildmat.2020.119912

    Article  Google Scholar 

  31. Dao, V. D., Nguyen, N. L., Ly, H. B., Pham, B. T., & Le, T. T. (2020). Cost-effective approaches based on machine learning to predict dynamic modulus of warm mix asphalt with high reclaimed asphalt pavement. Materials, 13, 3272. https://doi.org/10.3390/ma13135272

    Article  Google Scholar 

  32. Majidifard, H., Adu-Gyamfi, Y., & Buttlar, W. G. (2020). Deep machine learning approach to develop a new asphalt pavement condition index. Construction and Building Materials, 247, 118513. https://doi.org/10.1016/j.conbuildmat.2020.118513

    Article  Google Scholar 

  33. Zeiada, W., Dabous, S. Q., Hamad, K., Al-Ruzouq, R., & Khalil, M. A. (2020). Machine learning for pavement performance modelling in warm climate regions. Arabian Journal for Science and Engineering, 45, 4091–4109. https://doi.org/10.1007/s13369-020-04398-6

    Article  Google Scholar 

  34. Hou, Y., Li, Q., Zhang, C., Lu, G., Ye, Z., Chen, Y., Wang, L., & Cao, D. (2020). The state-of-the-art review on applications of intrusive sensing, image processing techniques, and machine learning methods in pavement monitoring and analysis. Engineering, In Press. https://doi.org/10.1016/j.eng.2020.07.030

  35. Liu, J., Yang, X., Lau, S., Wang, X., & Luo, S. (2020). Automated pavement crack detection and segmentation based on two-step convolutional neural network. Computer-Aided Civil and Infrastructure Engineering, 2, 1291–1305. https://doi.org/10.1111/mice.12622

    Article  Google Scholar 

  36. Bonaccorso, G. (2018). Machine learning algorithms: Popular algorithms for data science and machine learning. (2nd ed.). Packt Publishing.

    Google Scholar 

  37. Kissell, R. L. (2021). Machine learning techniques. Algorithmic trading methods. (2nd ed., pp. 221–231). Academic Press.

    Chapter  Google Scholar 

  38. Chang, A. C. (2020). Machine and deep learning. Intelligence-based medicine: Artificial intelligence and human cognition in clinical medicine and healthcare. (pp. 67–140). Academic Press.

    Chapter  Google Scholar 

  39. Rasmussen, C. E., & Williams, C. (2006). Gaussian processes for machine learning. MIT Press.

    MATH  Google Scholar 

  40. Refaeilzadeh, P., Tang, L., & Liu, H. (2009). Cross-validation. In L. Liu & M. T. Özsu (Eds.), Encyclopedia of database systems. (pp. 532–538). Springer. https://doi.org/10.1007/978-0-387-39940-9_565

    Chapter  Google Scholar 

  41. Rasmussen, C. E., & Nickisch, H. (2010). Gaussian processes for machine learning (GPML) toolbox. Journal of Machine Learning Research, 11, 3011–3015

    MathSciNet  MATH  Google Scholar 

  42. Bosscher, P. J., Bahia, H. U., Thomas, S., & Russell, J. S. (1998). relationship between pavement temperature and weather data: Wisconsin field study to verify superpave algorithm. Transportation Research Record, 1609, 1–11. https://doi.org/10.3141/1609-01

    Article  Google Scholar 

  43. Mohseni, A. (1988). LTPP seasonal asphalt concrete (AC) pavement temperature models. Report No. FHWA-RD-97-103 for Federal Highway Administration, McLean, VA.

Download references

Acknowledgements

Thanks to Lana Gutwin from the IRRF for her assistance with the preparation of this paper.

Funding

Not applicable.

Author information

Authors and Affiliations

  1. Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, T6G 1H9, Canada

    Mohamad Molavi Nojumi, Yunyan Huang, Leila Hashemian & Alireza Bayat

Authors
  1. Mohamad Molavi Nojumi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yunyan Huang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Leila Hashemian
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Alireza Bayat
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

We confirm that this work is original and has not been published elsewhere, nor is it currently under consideration for publication elsewhere. Also, we confirm that the manuscript has been read and approved by all named authors and that there are no other persons who satisfied the criteria for authorship but are not listed.

Corresponding author

Correspondence to Alireza Bayat.

Ethics declarations

Conflict of interest

We have no conflicts of interest to disclose.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Molavi Nojumi, M., Huang, Y., Hashemian, L. et al. Application of Machine Learning for Temperature Prediction in a Test Road in Alberta. Int. J. Pavement Res. Technol. 15, 303–319 (2022). https://doi.org/10.1007/s42947-021-00023-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s42947-021-00023-3

Keywords

Search

Navigation