nach oben

Erschienen in:

2013 | OriginalPaper | Buchkapitel

4. Micro-Electrical Discharge Machining

verfasst von : Muhammad P. Jahan

Erschienen in: Nontraditional Machining Processes

Verlag: Springer London

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter provides a comprehensive overview on the micro-electrical discharge machining (micro-EDM) process. The physical principle of micro-EDM and differences between macro- and micro-EDM and micro-EDM system components are discussed. A discussion on major operating parameters of micro-EDM and their effect on the performance parameters is presented. A brief discussion on variants of micro-EDM and their industrial applications has been included. The research advances on the areas of micro-EDM and micro-EDM-based compound and hybrid machining processes have been discussed. Finally, a comparative evaluation of micro-EDM to other machining processes has been presented.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel CO2 Laser Cutting of Triangular Geometry in Aluminum Foam

Nächstes Kapitel Prototype Machine for Micro-EDM

Ho KH, Newman ST (2003) State of the art electrical discharge machining (EDM). Int J Mach Tools Manuf 43:1287–1300CrossRef

Ho KH, Newman ST, Rahimifard S, Allen RD (2004) State of the art wire electrical discharge machining. Int J Mach Tools Manuf 44:1247–1259CrossRef

Arbizu ID, Pérez CJL (2013) History and foundations of EDM: the least conventional of the machining. http://www.interempresas.net/MetalWorking/Articles/12068-The-least-conventional-of-the-machining.html, last accessed 24 Apr 2013

Kurafuji H, Masuzawa T (1968) Micro-EDM of cemented carbide alloys. Jpn Soc Electr Mach Eng 2(3):1–16

Jameson EC (2001) Description and development of electrical discharge machining (EDM), in: electrical discharge machining. Society of Manufacturing Engineers, Dearborn, Michigan p 12

Masuzawa T (2000) State of the art micromachining. Ann CIRP 49(2):473–488CrossRef

Gentili E, Tabaglio L, Aggogeri F (2005) Review on micromachining techniques. Courses Lectures Int Centre Mech Sci 486:387 dimgruppi.ing.unibs.itCrossRef

Schumacher BM (2004) After 60 years of EDM the discharge process remains still disputed. J Mater Process Technol 149:376–381CrossRef

Takahata K (2009) Micro-electro-discharge machining technologies for MEMS, Chapter 10. Micro Electron Mech Syst INTECH, Croatia, pp 144–164

10.

Rahman M, Asad ABMA, Masaki T, Saleh T, Wong YS, Kumar AS (2010) A multiprocess machine tool for compound micromachining. Int J Mach Tools Manuf 50(4):344–356CrossRef

11.

Wong YS, Rahman M, Lim HS, Han H, Ravi N (2003) Investigation of micro-EDM material removal characteristics using single RC-pulse discharges. J Mater Process Technol 140(1–3):303–307CrossRef

12.

Masuzawa T (2001) Micro EDM. In: Proceedings of the ISEM XIII. Fundación Tekniker, pp 3–19 ISBN 932064-0-7

13.

Micro manufacturing, differences between macro and micro EDM, Ministerio de Ciencia e Innovación. http://www.micromanufacturing.net/didactico/Desarollo/edm-eng/6-differences-between-macro-and-micro-edm. Last Accessed 10 Dec 2012

14.

Katz Z, Tibbles CJ (2005) Analysis of micro-scale EDM process. Int J Adv Manuf Technol 25:923–928CrossRef

15.

Uhlmann E, Piltz S, Doll U (2005) Machining of micro/miniature dies and moulds by electrical discharge machining—recent development. J Mater Process Technol 167:488–493CrossRef

16.

Han F, Yamada Y, Kawakami T, Kunieda M (2004) Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control. Precis Eng 28:378–385CrossRef

17.

Kunieda M, Lauwers B, Rajurkar KP, Schumacher BM (2005) Advancing EDM through fundamental insight into the process. Ann CIRP 54(2):599–622CrossRef

18.

Rajurkar KP, Levy G, Malshe A, Sundaram MM, McGeough J, Hu X, Resnick R, De Silva A (2006) Micro and nano machining by electro-physical and chemical processes. Ann CIRP 55(2):643–666CrossRef

19.

Zhang L, Jia Z, Liu W, Li A (2012) A two-stage servo feed controller of micro-EDM based on interval type-2 fuzzy logic. Int J Adv Manuf Technol 59(5–8):633–645CrossRef

20.

Yang GH, Liu F, Lin HB (2011) Research on an embedded servo control system of micro-EDM. Appl Mech Mater 120:573–577CrossRef

21.

Rajurkar KP, Wang WM (1991) On-line monitor and control for wire breakage in WEDM. Ann CIRP 40(1):219–222CrossRef

22.

Snoeys R, Dauw D, Kruth JP (1980) Improved adaptive control system for EDM processes. Ann CIRP 29(1):97–101CrossRef

23.

McGeough JA (1988) Advanced methods of machining, 1st edn. Chapman and Hall, USA. ISBN 0-412-31970-5

24.

Pham DT, Dimov SS, Bigot S, Ivanov A, Popov K (2004) Micro-EDM—recent developments and research issues. J Mater Process Technol 149:50–57CrossRef

25.

Puertas I, Luis CJ, Álvarez L (2004) Analysis of the influence of EDM parameters on surface quality, MRR and EW of WC–Co. J Mater Process Technol 153, 154:1026–1032

26.

Hewidy MS, El-Taweel TA, El-Safty MF (2005) Modelling the machining parameters of wire electrical discharge machining of Inconel 601 using RSM. J Mater Process Technol 169:328–336CrossRef

27.

Qu J, Shih AJ (2002) Development of the cylindrical wire electrical discharge machining process, part 2: surface integrity and roundness. Trans ASME 124

28.

Tsai Y, Masuzawa T (2004) An index to evaluate the wear resistance of the electrode in micro-EDM. J Mater Process Technol 149:304–309CrossRef

29.

Cao G, Zhao W, Wang Z, Guo Y (2005) Instantaneous fabrication of tungsten microelectrode based on single electrical discharge. J Mater Process Technol 168:83–88CrossRef

30.

Jahan MP, Wong YS, Rahman M (2009) A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator. J Mater Process Technol 209(4):1706–1716CrossRef

31.

Bleys P, Kruth JP, Lauwers B (2004) Sensing and compensation of tool wear in milling EDM. J Mater Process Technol 149:139–146CrossRef

32.

Yu Z, Jun T, Kunieda M (2004) Dry EDM of cemented carbide. J Mater Process Technol 149:353–357CrossRef

33.

Tao J, Shih AJ, Ni J (2008) Near-dry EDM milling of mirror-like surface finish. Int J Electr Mach 13:29–33

34.

Subbu SK, Karthikeyan G, Ramkumar J, Dhamodaran S (2011) Plasma characterization of dry μ-EDM. Int J Adv Manuf Technol 56(1–4):187–195CrossRef

35.

Zhang QH, Zhang JH, Deng JX, Qin Y, Niu ZW (2002) Ultrasonic vibration electrical discharge machining in gas. J Mater Process Technol 129:135–138CrossRef

36.

Lim HS, Wong YS, Rahman M, Lee EMK (2003) A study on the machining of high-aspect ratio micro-structures using micro EDM. J Mater Process Technol 140:318–325CrossRef

37.

Jahan MP, Rahman M, Wong YS, Fuhua L (2010) On-machine fabrication of high-aspect-ratio micro-electrodes and application in vibration-assisted micro-electrodischarge drilling of tungsten carbide. In: Proceedings of the institution of mechanical engineers, part B: J Eng Manuf 224(5):795–814

38.

Masuzawaa T, Fujinoa M, Kobayashia K, Suzukib T, Kinoshita N (1985) Wire electro-discharge grinding for micro-machining. CIRP Ann Manuf Technol 34(1):431–434CrossRef

39.

Song KY, Chung DK, Park MS, Chu CN (2009) Micro-electrical discharge drilling of tungsten carbide using deionized water. J Micromech Microeng 19:045006CrossRef

40.

Egashira K, Taniguchi T, Hanajima S (2006) Planetary EDM of micro holes. Int J Electr Mach 11:15–18

41.

Yu ZY, Rajurkar KP, Shen H (2002) High aspect ratio and complex shaped blind micro holes by micro EDM. Ann CIRP 51(1):359–362CrossRef

42.

Kim BH, Park BJ, Chu CN (2006) Fabrication of multiple electrodes by reverse EDM and their application in micro ECM. J Micromech Microeng 16(4):843–850CrossRef

43.

Sarix Micro-EDM machine. http://www.sarix.com/index_e.html. Last Accessed 10 Dec 2012

44.

Asad ABMA, Masaki T, Rahman M, Lim HS, Wong YS (2007) Tool-based micro-machining. J Mater Process Technol 192–193:204–211CrossRef

45.

Morgan CJ, Vallance RR, Marsh ER (2006) Micro-machining and micro-grinding with tools fabricated by micro electro-discharge machining. Int J Nanomanuf 1(2):242–258CrossRef

46.

Wada T, Masaki T, Davis DW (2002) Development of micro grinding process using micro EDM trued diamond tools. In: Proceedings of the annual meeting of ASPE

47.

Fleischer J, Masuzawa T, Schmidt J, Knoll M (2004) New applications for micro-EDM. J Mater Process Technol 149:246–249CrossRef

48.

Campana S, Miyazawa S (1999) Micro-EDM and ECM in DI water. In: Proceedings of annual meeting of American society of precision engineering (ASPE)

49.

Nguyen MD, Rahman M, Wong YS (2012) Simultaneous micro-EDM and micro-ECM in low-resistivity deionized water. Int J Mach Tools Manuf 54–55:55–65CrossRef

50.

Zeng Z, Wang Y, Wang Z, Shan D, He X (2012) A study of micro-EDM and micro-ECM combined milling for 3D metallic micro-structures. Precis Eng 36(3):500–509CrossRef

51.

Takahata K, Shibaike N, Guckel H (2000) High-aspect-ratio WC-Co microstructure produced by the combination of LIGA and micro-EDM. Microsyst Technol 6(5):175–178CrossRef

52.

Huang J-D, Kuo C-L (2002) Pin-plate micro assembly by integrating micro-EDM and Nd-YAG laser. Int J Mach Tools Manuf 42:1455–1464CrossRef

53.

Kuo C-L, Huang J-D, Liang H-Y (2002) Precise micro-assembly through an integration of micro-EDM and Nd-YAG. Int J Adv Manuf Technol 20:454–458CrossRef

54.

Kuo C-L, Huang J-D, Liang H-Y (2003) Fabrication of 3D metal microstructures using a hybrid process of micro-EDM and laser assembly. Int J Adv Manuf Technol 21:796–800CrossRef

55.

Lin YC, Yan BH, Chang YS (2000) Machining characteristics of titanium alloy (Ti-6Al-4V) using a combination process of EDM with USM. J Mater Process Technol 104(3):171–177CrossRef

56.

Endo T, Tsujimoto T, Mitsui K (2008) Study of vibration-assisted micro-EDM-the effect of vibration on machining time and stability of discharge. Precis Eng 32(4):269–277CrossRef

57.

Tong H, Li Y, Wang Y (2008) Experimental research on vibration assisted EDM of micro-structures with non-circular cross-section. J Mater Process Technol 208(1–3):289–298CrossRef

58.

Jahan MP, Saleh T, Rahman M, Wong YS (2010) Development, modeling, and experimental investigation of low frequency workpiece vibration-assisted micro-EDM of tungsten carbide. J Manuf Sci Eng 132(5):054503 (8)

59.

Kansal HK, Singh S, Kumar P (2007) Technology and research developments in powder mixed electric discharge machining (PMEDM). J Mater Process Technol 184:32–41CrossRef

60.

Jahan MP, Anwar MM, Wong YS, Rahman M (2009) Nanofinishing of hard materials using micro-EDM. Proc Inst Mech Eng Part B J Eng Manuf 223:1127–1142CrossRef

61.

Sorkhel SK, Bhattacharyya B, Mitra S, Doloi B (1996) Development of electrochemical discharge machining technology for machining of advanced ceramics. In: International conference on agile manufacturing, pp 98–103

62.

Han M-S, Min B-K, Lee SJ (1999) Improvement of surface integrity of electro-chemical discharge machining process using powder-mixed electrolyte. J Mater Process Technol 95:145–154CrossRef

63.

Bhattacharyya B, Doloi BN, Sorkhel SK (1999) Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials. J Mater Process Technol 95:145–154CrossRef

64.

Yang CT, Song SL, Yan BH, Huang FY (2006) Improving machining performance of wire electrochemical discharge machining by adding SiC abrasive to electrolyte. Int J Mach Tools Manuf 46:2044–2050CrossRef

65.

Heinz K, Kapoor SG, Devor RE, Surla V (2011) An investigation of magnetic-field-assisted material removal in micro-EDM for nonmagnetic materials. J Manuf Sci Eng 133(021002):9

66.

Yeo SH, Murali M, Cheah HT (2004) Magnetic field assisted micro electro-discharge machining. J Micromech Microeng 14:1526–1529CrossRef

67.

Jahan MP, Rahman M, Wong YS (2011) A review on the conventional and micro-electrodischarge machining of tungsten carbide. Int J Mach Tools Manuf 51(12):837–858CrossRef

68.

Reynaerts D, Heeren PH, Van Brussel H, Beuret C, Larsson O, Bertholds A (1997) Microstructuring of silicon by electro-discharge machining (EDM) part II: applications. Sens Actuators 61:379–386CrossRef

69.

Grzesik W (2008) Advanced machining processes of metallic materials: theory, modelling and applications chapter sixteen micromachining. Elsevier publishers, Amsterdam

70.

Byrne G, Dornfeld D, Denkena B (2003) Advancing cutting technology. Ann CIRP 52(2):483–507CrossRef

Titel: Micro-Electrical Discharge Machining
verfasst von: Muhammad P. Jahan
Verlag: Springer London
Buch: Nontraditional Machining Processes
Print ISBN: 978-1-4471-5178-4

Electronic ISBN: 978-1-4471-5179-1

Copyright-Jahr: 2013
DOI: https://doi.org/10.1007/978-1-4471-5179-1_4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht