nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Particularities of Calculating Temperature Fields of Large Forging Billets

verfasst von : O. Kobelev, S. Albul, N. Kirillova

Erschienen in: Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020)

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article shows methods for calculating the uneven temperature distribution in ingots and billets during their heating and cooling between forging operations. Both mathematical methods and methods using CAD/CAE and other computer technologies are considered. The basic equations of thermal processes based on the Euler approach are presented, as well as the assumptions and simplifications adopted in this case are indicated. The main stages in the procedure of solving the problems of temperature distribution in large forgings using computer technology are described. As an example, a computer calculation of temperature fields in a cylindrical billet Ø250 × 500 mm when cooling from 1200 °C on a backing plate with a temperature of 400 °C is shown.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Determining Fuel Consumption of Automobile and Tractor Diesels When Some of Cylinders Disconnected

Nächstes Kapitel Development and Test of Mathematical Model of Pre-start Mode of Diesel Operation at Low Temperatures

Snitko SA, Yakovchenko AV, Sotnikov AL (2018) Influence of wheel billet stamping schemes on power modes of forming press operation and on wear of the deformation tool. Izv Ferrous Metall 61(5):385–392CrossRef

Radyuk AG, Gorbatyuk SM, Gerasimova AA (2011) Use of electric-arc metallization to recondition the working surfaces of the narrow walls of thick-walled slab molds. Metallurgist 55(5–6):419–423CrossRef

Gorbatyuk SM, Kochanov AV (2012) Method and equipment for mechanically strengthening the surface of rolling-mill rolls. Metallurgist 56(3–4):279–283. https://doi.org/10.1007/s11015-012-9571-2CrossRef

Bardovskiy AD, Gorbatyuk SM, Keropyan AM, Bibikov PY (2018) Assessing parameters of the accelerator disk of a centrifugal mill taking into account features of particle motion on the disk surface. J Friction Wear 39(4):326–329. https://doi.org/10.3103/S1068366618040037CrossRef

Gorbatyuk SM, Morozova IG, Naumova MG (2016) Color mark formation on a metal surface by a highly concentrated energy source. Metallurgist 60(5–6):646–650. https://doi.org/10.1007/s11015-016-0345-0CrossRef

Gorbatyuk SM, Sedykh LV (2010) Improving the durability of rolling-mill rolls. Metallurgist 54(5–6):299–301CrossRef

Busygin AM (2020) Cabled feeder for underground drilling machines. Lecture notes in mechanical engineering, pp 231–237. https://doi.org/10.1007/978-3-030-22041-9_27

Busygin AM (2018) The force analysis of the caterpillar excavator stick arrangement mechanism with three degrees of freedom. Min Informational Anal Bull 2018(1):133–142CrossRef

Zakharov AN, Gorbatyuk SM, Borisevich VG (2008) Modernizing a press for making refractories. Metallurgist 52(7–8):420–423. https://doi.org/10.1007/s11015-008-9072-5CrossRef

10.

Bast J, Gorbatyuk SM, Kryukov IY (2011) Horizontal hcc-12000 unit for the continuous casting of semifinished products. Metallurgist 55(1–2):116–118. https://doi.org/10.1007/s11015-011-9399-1CrossRef

11.

Surina NV, Mnatsakanyan VU (2019) Automated process design system for mining equipment repair. Gornyi Zhurnal 7:90–95. https://doi.org/10.17580/gzh.2019.07.08CrossRef

12.

Slobodyanik TM, Balakhnina EE (2019) Dynamics of elementary differential composed of elastic bodies. Min Informational Anal Bull 9:204–210. https://doi.org/10.25018/0236-1493-2019-09-0-204-210CrossRef

13.

Slobodyanik TM, Balakhnina EE (2020) Dynamic analysis of elementary differential gear with rigid links. IOP Conf Ser Mater Sci Eng 709(2):033066. https://doi.org/10.1088/1757-899X/709/3/033066CrossRef

14.

Bardovsky AD, Gerasimova AA, Basyrov II (2019) Study of oscillating process of harp screens. Lecture notes in mechanical engineering, pp 133–139. https://doi.org/10.1007/978-3-319-95630-5_14

15.

Naumova M, Basyrov I, Aliev K (2018) Reengineering of the ore preparation production process in the context of “Almalyk MMC” JSC. In: MATEC web of conferences, vol 224, p 01030

16.

Naumova MG, Morozova IG, Zarapin AY, Borisov PV (2018) Copper alloy marking by altering its surface topology using laser heat treatment. Metallurgist 62(5–6):464–469. https://doi.org/10.1007/s11015-018-0682-2CrossRef

17.

Chichenev NA (2015) Import-replacing re-engineering of the drive of the rollers in the intermediate roller table of a continuous bloom caster. Metallurgist 58(9–10):892–895. https://doi.org/10.1007/s11015-015-0013-9CrossRef

18.

Mazhirin EA, Chichenev NA, Zadorozhnyi VD (2008) Modernizing the track units of the 2800 thick-sheet mill at OAO Ural’skaya Stal. Steel Transl 38(12):1048–1050. https://doi.org/10.3103/S0967091208120255CrossRef

19.

Markov O, Gerasimenko O, Aliieva L, Shapoval A (2019) Development of the metal rheology model of high-temperature deformation for modeling by finite element method. EUREKA, Phys Eng 2:52–60CrossRef

20.

Gorbatyuk SM, Pavlov SM, Shapoval AN (1998) Experience in application of screw rolling mill for deforming the billets of refractory metals. Metallurg 5:32–35

21.

Rybak J, Ivannikov A, Egorova A, Ohotnikova K, Fernandes I (2017) Some remarks on experience based geotechnical education. Int Multi Sci GeoConference Surveying Geol Min Ecol Manag SGEM 17(12):1003–1012. https://doi.org/10.5593/sgem2017/12/S02.127CrossRef

22.

Dragobetskii V, Zagirnyak M, Naumova O, Shlyk S, Shapoval A (2018) Method of determination of technological durability of plastically deformed sheet parts of vehicles. Int J Eng Technol (UAE) 7(4):92–99. https://doi.org/10.14419/ijet.v7i4.3.19558CrossRef

23.

Eron’ko SP (2003) Efficient slide-gate systems. Metallurgist 47(3–4):158–162. https://doi.org/10.1023/A:1025078231671CrossRef

24.

Nikolaev VA, Rusakov AD, Chichenev NA (1996) Forecasting a multiroll mills rolls hardness. Stal 9:58–60

25.

Kobelev OA, Albul SV, Kirillova NL (2020) Research and development of broaching methods on mandrel of large-sized pipe forgings. IOP Conf Ser Mater Sci Eng 709(3):044104. https://doi.org/10.1088/1757-899X/709/4/044104CrossRef

26.

Osadchiy VA, Albul SV, Kuprienko NS, Kirillova NL (2020) Future developments of a roll forming mill design algorithm. IOP Conf Ser Mater Sci Eng 709(3):044079. https://doi.org/10.1088/1757-899x/709/4/044079

27.

Gorbatyuk S, Kondratenko V, Sedykh L (2019) Investigation of the deep hole drill stability when using a steady rest. Mater Today Proc 11:258–264. https://doi.org/10.1016/j.matpr.2018.12.140CrossRef

28.

Kolmogorov VL (1986) Mekhanika obrabotki metallov davleniem (Mechanics of metal forming by metal pressure). Metallurgiya, Moscow

29.

Nazaratin VV, Kobelev OA, Efimov MV, Selyutin AA, Yavtushenko PM (2013) Analysis of technologies used to make hollow ingots and prospects for their improvement. Metallurgist 56(9–10):672–678CrossRef

30.

Kobelev OA, Zinov’ev AV, Tsepin MA (2009) Effective production of large pipe blanks. Steel Transl 39(6):501–505. https://doi.org/10.3103/S0967091209060163CrossRef

31.

Artiukh V, Raimberdiyev T, Mazur V (2016) Use of CAE-systems at evaluation of shock absorbers for metallurgical equipment. MATEC Web Conf 53:01039. https://doi.org/10.1051/matecconf/20165301039CrossRef

32.

Artiukh V, Mazur V, Pokrovskaya E (2016) Influence of strip bite time in work rolls gap on dynamic loads in strip rolling stands. In: MATEC web of conferences, vol 86, p 01030. 10.1051/matecconf/20168601030

33.

Eron’ko SP, Oshovskaya EV, Yushchenko MV, Starodubtsev BI (2014) Screw systems for supplying slag-forming mixture to the molds of continuous-casting machines. Steel Transl 44(9):640–645

34.

Efremov DB, Gerasimova AA, Gorbatyuk SM, Chichenev NA (2019) Study of kinematics of elastic-plastic deformation for hollow steel shapes used in energy absorption devices. CIS Iron Steel Rev 18:30–34. https://doi.org/10.17580/cisisr.2019.02.06CrossRef

Titel: Particularities of Calculating Temperature Fields of Large Forging Billets
verfasst von: O. Kobelev
S. Albul
N. Kirillova
Verlag: Springer International Publishing
Buch: Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020)
Print ISBN: 978-3-030-54813-1

Electronic ISBN: 978-3-030-54814-8

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-3-030-54814-8_92

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht