Abstract
The maintenance model described in Chap. 3 is applied to analyse individually nine constructive solutions (six façade claddings: ceramic tiling systems (CTS), natural stone claddings (NSC), rendered façades (RF), painted surfaces (PS), external thermal insulation composite systems (ETICS), architectural concrete façades (ACF); two window frames types: aluminium window frames (AWF), wooden window frames (WWF); and one roof cladding solution: ceramic claddings in pitched roofs (CCPR)). For each constructive solution, three maintenance strategies are addressed, ranging from a maintenance strategy where preventive maintenance is not applied (most common maintenance strategy nowadays) to a maintenance strategy with a higher level of preventive maintenance (including cleaning operations and minor interventions). The results are assessed through four parameters: service life and durability, efficiency index, life cycle costs, and number of total replacements.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Seeley IH (1987) Building maintenance. Macmillan International Higher Education, England
Thai-Ker L, Chung-Wan W (2006) Challenges of external wall tiling in Singapore. Paper presented at IX World Congress on Ceramic Tile Quality, Castellón, Spain
Gibson J, Rioja F (2016) Public infrastructure maintenance and the distribution of wealth. Econ Inq 55(1):175–186
Forster AM, Kayan B (2009) Maintenance for historic buildings: a current perspective. Struct Surv 27(3):210–229
Sharif SA, Hammad A (2019) Simulation-based multi-objective optimization of institutional building renovation considering energy consumption, life-cycle cost and life-cycle assessment. J Build Eng 21:429–445
Raposo S, de Brito J, Fonseca M (2013) Planned preventive maintenance activities: analysis of guidance documents. In: de Freitas VP, Delgado JMPQ (eds) Durability of building materials and components, Springer Science+Business Media, pp 35–60
Rocha PF, Rodrigues RC (2016) Maintenance as a tool to avoid building pathology—the Oporto building example. In: Delgado JMPQ (ed) Sustainable construction: building performance simulation and asset and maintenance management. Springer Science+Business Media, Singapore, pp 126–146
Madureira S, Flores-Colen I, de Brito J, Pereira C (2017) Maintenance planning of facades in current buildings. Constr Build Mater 147:790–802
de Brito J, Pereira C, Silvestre JD, Flores-Colen I (2020) Expert knowledge-based inspection systems: inspection, diagnosis, and repair of the building envelope. Springer, Switzerland
Branco FA, de Brito J (2004) Handbook of concrete bridge management. ASCE Press, Reston, VA, USA
Grelk B, Christiansen C, Schouenborg B, Malaga K (2007) Durability of marble cladding—a comprehensive literature review. J ASTM Int 4:1–19
RGEU (2021) Decree-Law No. 177/2001 (in Portuguese). https://dre.pt/pesquisa/-/search/331257/details/maximized. Accessed 04 Aug 2021
Building Research Establishment Digest (BRE Digest) (1978) 217—wall claddings defects and their diagnosis, London
Richardson BA (1980) Remedial treatment of buildings. The Construction Press
British Standards Institution (BSI) (1986) BS 8210—Guide to building maintenance management, London
Albano J (2005) The maintenance of buildings in 250 practical sheets (in French). Editions Le Moniteur, Paris
Antošová N (2013) Rules for the effective maintenance of buildings and maintenance of ETICS system with biocorrosion. OTMC Int J 5(1):654–662
Antošová N, Minarovičová K (2016) The methodology for the selection of technologies for the removal of microorganisms from ETICS. Appl Mech Mater 820:200–205
Kallen MJ, van Noortwijk JM (2005) A study towards the application of Markovian deterioration processes for bridge maintenance modelling in the Netherlands. Paper presented at European Safety and Reliability Conference, Tri City, Poland
Rens KL, Nogueira CL, Transue DJ (2005) Bridge management and nondestructive evaluation. J Perform Constr Facil 19(1):3–16
Precast/Prestressed Concrete Institute (PCI) (2007) Architectural Precast Concrete Manual, Chicago
Flint M, Baker J, Billington S (2013) A probabilistic framework for performance-based durability engineering. In: de Freitas VP, Delgado JMPQ (eds) Durability of building materials and components, Springer Science+Business Media, pp 1–33
Papakonstantinou K, Shinozuka M (2014) Optimum inspection and maintenance policies for corroded structures using partially observable Markov decision processes and stochastic, physically based models. Probabilistic Eng Mech 37:93–108
Morgado J, Flores-Colen I, De Brito J, Silva A (2017) Maintenance planning of pitched roofs in current buildings. J Constr Eng Manage 143(3):05017010
CYPE (2019) CYPE price generator (in Portuguese). http://www.geradordeprecos.info/. Accessed 01 Jul 2019
European Committee for Standardization (CEN) (2017) EN 14411—Ceramic tiles; definition, classification, characteristics, assessment and verification of constancy of performance and marking. Brussels
European Committee for Standardization (CEN) (2017) EN 12004-1—Adhesives for ceramic tiles; Part 1: requirements, assessment and verification of constancy of performance, classification and marking. Brussels
European Committee for Standardization (CEN) (2009) EN 13888—Grout for tiles. Requirements, evaluation of conformity, classification and designation. Brussels
European Committee for Standardization (CEN) (2015) EN 1469—Natural stone products. Slabs for cladding; requirements. Brussels
European Committee for Standardization (CEN) (2017) EN 998-1—Specification for mortar for masonry; Part 1: rendering and plastering mortar. Brussels
European Committee for Standardization (CEN) (2006) EN 1504–2—Products and systems for the protection and repair of concrete structures; definitions, requirements, quality control and evaluation of conformity; Part 2: surface protection systems for concrete. Brussels
European Committee for Standardization (CEN) (2012) EN 13163—Thermal insulation products for buildings; factory made expanded polystyrene (EPS) products. Specification, Brussels
European Committee for Standardization (CEN) (2017) EN 206—Concrete; specification, performance, production and conformity. Brussels
European Committee for Standardization (CEN) (2016) EN 12207—Windows and doors; air permeability; classification. Brussels
European Committee for Standardization (CEN) (2000) EN 12208—Windows and doors; watertightness; classification. Brussels
European Committee for Standardization (CEN) (2016) EN 12210—Windows and doors; Resistance to wind load; classification, Brussels
European Committee for Standardization (CEN) (2015) EN 1304—Clay roofing tiles and fittings. Product definitions and specifications. Brussels
European Committee for Standardization (CEN) (2012) EN 197–1—Cement; Part 1: composition, specifications and conformity criteria for common cements. Brussels
Ferreira C, Neves LC, Silva A, de Brito J (2020) Stochastic maintenance models for ceramic claddings. Struct Infrastruct Eng 16(2):247–265
Ferreira C, Silva A, de Brito J, Dias IS, Flores-Colen I (2020) Maintenance modelling of ceramic claddings in pitched roofs based on the evaluation of their in situ degradation condition. Infrastructures 5(9):77
Ferreira C, Silva A, de Brito J, Dias IS, Flores-Colen I (2021) Definition of a condition-based model for natural stone claddings. J Build Eng 33:101643
Building Maintenance Information (BMI) (2001) Life expectancy of building components. Surveyor’s experiences of buildings in use: a practical guide. RICS, UK
Galbusera MM, de Brito J, Silva A (2015) Application of the factor method to the prediction of the service life of ceramic external wall cladding. J Perform Constr Facil 29(3):04014086
Silva A, de Brito J, Gaspar PL (2016) Methodologies for service life prediction of buildings: with a focus on façade claddings. Springer International Publishing, Switzerland
Gaspar PL (2017) End of the service life of ceramic cladding: lessons from the Girasol building in Madrid. J Perform Constr Facil 31(2):04016088
Shohet IM, Paciuk M (2004) Service life prediction of exterior cladding components under standard conditions. Constr Manag Econ 22(10):1081–1090
Shohet IM, Rosenfeld Y, Puterman, M, Gilboa E (1999) Deterioration patterns for maintenance management - a methodological approach. Paper presented at 8th International Conference for Durability of Building Materials and Components, Vancouver, Canada
Mayer P, Bourke K (2005) Durability rankings for building component service life prediction. Paper presented at 10th international conference for durability of building materials and components, Lyon, France
Gaspar PL, de Brito J (2008) Service life estimation of cement-rendered façades. Build Res Inf 36(1):44–55
Silva A, Dias JLR, Gaspar PL, de Brito J (2013) Statistical models applied to service life prediction of rendered façades. Autom Constr 30:151–160
Chai C, de Brito J, Gaspar PL, Silva A (2014) Predicting the service life of exterior wall painting: techno-economic analysis of alternative maintenance strategies. J Constr Eng Manage 140(3):04013057
Dias JL, Silva A, Chai C, Gaspar PL, de Brito J (2014) Neural networks applied to service life prediction of exterior painted surfaces. Build Res Inf 42(3):371–380
Chai C, de Brito J, Gaspar PL, Silva A (2015) Statistical modelling of the service life prediction of painted surfaces. Int J Strateg Prop Manag 19(2):173–185
Magos M, de Brito J, Gaspar PL, Silva A (2016) Application of the factor method to the prediction of the service life of external paint finishes on façades. Mater Struct 49(12):5209–5225
Silva A, Gaspar PL, de Brito J, Neves LC (2016) Probabilistic analysis of degradation of façade claddings using Markov chain models. Mater Struct 49(7):2871–2892
European Organisation for Technical Assessment (EOTA) (2019) European Assessment Document - External thermal insulation composite systems with rendering, Brussels
Silva JMD, Falorca J (2009) A model plan for buildings maintenance with application in the performance analysis of a composite facade cover. Constr Build Mater 23:3248–3257
Edis E, Türkeri N (2012) Durability of external thermal insulation composite systems in Istanbul Turkey. ITU J Fac Archit 9(1):134–148
Liisma E, Raado LM, Lumi S, Lill I, Sulakatko V (2014) The effect of moisture content of insulation boards on the adhesion strength of ETICS. Paper presented at 5th European Conference of Civil Engineering, Florence, Italy
Ximenes S, de Brito J, Gaspar PL, Silva A (2015) Modelling the degradation and service life of ETICS in external walls. Mater Struct 48(7):2235–2249
Marques C, de Brito J, Silva A (2018) Application of the factor method to the prediction of ETICS. Int J Strateg Prop Manag 22(3):204–222
British Standards Institution (BSI) (2011) BS ISO 15686–1:2011—Buildings and constructed assets—service life planning. Part 1: general principles and framework, London
Tavares J, Silva A, de Brito J (2020) Computational models applied to the service life prediction of external thermal insulation composite systems (ETICS). J Build Eng 27:100944
Takahashi T, Sekine E, Horiike T, Matsuoka S, Hoshiro H (2008) Study on the applicability of short fiber reinforced concrete to precast concrete slabs for slab track. Q Rep RTRI 49(1):40–46
Australian Standard (AS) (2009) AS 3600:2009 Concrete structures, Sydney
European Committee for Standardization (CEN) (2004) EN 1992–1–1—Eurocode 2: Design of concrete structures - Part 1–1: General rules and rules for buildings, Brussels
Pakkala T, Köliö A, Lahdensivu J, Kiviste M (2014) Durability demands related to frost attack for Finnish concrete buildings in changing climate. Build Environ 82:27–41
Serralheiro MI, de Brito J, Silva A (2017) Methodology for service life prediction of architectural concrete facades. Constr Build Mater 133:261–274
Jardim A, Silva A, de Brito J (2019) Application of the factor method to the service life prediction of architectural concrete. Can J Civ Eng 46(11):1054–1062
Brown AW, Allwinkle SJ, Weir GF (1999) Evaluating the sustainability of alternative window and proprietary glazing systems. Paper presented at 8th international conference on durability of building materials and components, Vancouver, Canada
Housing Association Property Mutual (HAPM) (1999) Component life manual, CD-Rom, E&FN Spon
Citherlet S, Guglielmo F, Gay JB (2000) Window and advanced glazing systems life cycle assessment. Energy Build 32(3):225–234
Asif M, Muneer T, Kubie J (2005) Sustainability analysis of window frames. Build Serv Eng Res Technol 26(1):71–87
Re Cecconi F, Rigone P, Vatavalis P (2017) Factor method for aluminium windows and curtain walls. Paper presented at 14th international conference on durability of building materials and components, Ghent, Belgium
Fernandes D, de Brito J, Silva A (2019) Methodology for service life prediction of window frames. Can J Civ Eng 46(11):1010–1020
Maia M, Morais R, Silva A (2020) Application of the factor method to the service life prediction of window frames. Eng Fail Anal 109:104245
Royal Institution of Chartered Surveyors (RICS) (2000) Building maintenance: strategy, planning and performance, London, UK
Bauer M, Lair J, Wetzel C (2004) Predictive model for future deterioration, INVESTIMMO Project, Final technical report, European Commission
National Roofing Contractors Association (NRCA) (2007) The green roof systems manual. Rosemont, USA
National Association of Home Builders (NAHB) (2007) Bank of America home equity study of life expectancy of home components, Economics Group, Washington, DC, USA
Madrigal LO, Lanzarote BS, Bretones JMF (2015) Proposed method of estimating the service life of building envelope. Revista de la Construcción 14(1):60–68
Ramos R, Silva A, de Brito J, Gaspar PL (2018) Methodology for the service life prediction of ceramic claddings in pitched roofs. Constr Build Mater 166:386–399
Shohet IM, Laufer A (1996) Exterior cladding methods: a technoeconomic analysis. J Civ Eng Manag 122(3):242–247
Chew MYL, Tan SS, Soemara E (2004) Serviceability of materials in the tropics. J Archit Eng 10(2):69–76
Lee JS (2018) Value engineering for defect prevention on building façade. J Civ Eng Manag 144(8):04018069
Bechthold M, Kane A, King N (2015) Ceramic material systems: In Architecture and interior design. Birkhäuser, Switzerland
Wu S, Clements-Croome D (2007) Ratio of operating and maintenance costs to initial costs of building services systems. Cost Eng 49(12):30–33
Hughes W, Ancell D, Gruneberg S, Hirst L (2004) Exposing the myth of the 1:5:200 ratio relating initial cost, maintenance and staffing costs of office buildings. Paper presented at 20th Annual ARCOM Conference, Edinburgh, UK
Ive G (2006) Re-examining the costs and value ratios of owning and occupying buildings. Build Res Inf 34(3):230–245
Evans R, Haryott R, Haste N, Jones A (2004) The long-term costs of owning and using buildings. In: Macmillan S (ed) Designing better buildings: quality and value in the built environment. Spon Press, New York, pp 42–49
Kanniyapan G, Nesan LJ, Mohammad IS, Keat TS, Ponniah V (2019) Selection criteria of building material for optimising maintainability. Constr Build Mater 221:651–660
Dodgson JS, Spackman M, Pearman A, Phillips LD (2009) Multi-criteria analysis: a manual. Department for Communities and Local Government, London
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Ferreira, C., Silva, A., de Brito, J., Flores-Colen, I. (2023). Maintainability of Buildings’ Envelope. In: Maintainability of Building Envelope Elements. Springer Series in Reliability Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-14767-8_4
Download citation
DOI: https://doi.org/10.1007/978-3-031-14767-8_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-14766-1
Online ISBN: 978-3-031-14767-8
eBook Packages: EngineeringEngineering (R0)