nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

A Review on Models for the 3D Statics and 2D Dynamics of Pantographic Fabrics

verfasst von : Emilio Barchiesi, Luca Placidi

Erschienen in: Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A review on models for the statics of out-of-plane deformable pantographic fabrics is presented, along with a model describing the dynamics of in-plane-only deformable pantographic fabrics. We discuss those models able to describe the mechanical exotic properties conferred by the peculiar microstructure possessed by pantographic metamaterials, when three-dimensional deformations and in-plane dynamics are separately involved. For each approach, model formulation and modelling assumptions are discussed along with the presentation of numerical solutions in exemplary cases, and no attempt is made to model damage and failure phenomena.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Spectral Properties of Nanodimensional Piezoelectric Bodies with Voids and Surface Effects

Alibert, J., Della Corte, A.: Second-gradient continua as homogenized limit of pantographic microstructured plates: a rigorous proof. Zeitschrift für angewandte Mathematik und Physik 66(5), 2855–2870 (2015)MathSciNetCrossRefMATH

Altenbach, H., Eremeyev, V.: On the linear theory of micropolar plates. ZAMM J. Appl. Math. Mech./Zeitschrift für Angewandte Mathematik und Mechanik 89(4), 242–256 (2009)

AminPour, H., Rizzi, N.: A one-dimensional continuum with microstructure for single-wall carbon nanotubes bifurcation analysis. Math. Mech. Solids 21(2), 168–181 (2016)MathSciNetCrossRefMATH

Andreaus, U., Giorgio, I., Lekszycki, T.: A 2D continuum model of a mixture of bone tissue and bio-resorbable material for simulating mass density redistribution under load slowly variable in time. Zeitschrift für Angewandte Mathematik und Mechanik 13, 7 (2013)MATH

Auffray, N., dell’Isola, F., Eremeyev, V., Madeo, A., Rosi, G.: Analytical continuum mechanics à la Hamilton-Piola least action principle for second gradient continua and capillary fluids. Math. Mech. Solids 20(4), 375–417 (2015)MathSciNetCrossRefMATH

Battista, A., Rosa, L., dell’Erba, R., Greco, L.: Numerical investigation of a particle system compared with first and second gradient continua: deformation and fracture phenomena. Math. Mech. Solids, 1081286516657889 (2016)

Bersani, A.M., Della Corte, A., Piccardo, G., Rizzi, N.L.: An explicit solution for the dynamics of a taut string of finite length carrying a traveling mass: the subsonic case. Zeitschrift für angewandte Mathematik und Physik 67(4), 108 (2016)MathSciNetCrossRef

Bilotta, A., Formica, G., Turco, E.: Performance of a high-continuity finite element in three-dimensional elasticity. Int. J. Numer. Methods Biomed. Eng. 26(9), 1155–1175 (2010)CrossRefMATH

Boisse, P., Hamila, N., Guzman Maldonado, E., Madeo, A., Hivet, G., Dell’Isola, F.: The bias-extension test for the analysis of in-plane shear properties of textile composite reinforcements and prepregs: a review. Int. J. Mater. Form. 1–20 (2016)

10.

Cazzani, A., Malagù, M., Turco, E.: Isogeometric analysis: a powerful numerical tool for the elastic analysis of historical masonry arches. Contin. Mech. Thermodyn. 28(1–2), 139–156 (2016)MathSciNetCrossRefMATH

11.

Cazzani, A., Stochino, F., Turco, E.: An analytical assessment of finite element and isogeometric analyses of the whole spectrum of Timoshenko beams. ZAMM J. Appl. Math. Mech./Zeitschrift für Angewandte Mathematik und Mechanik (2016)

12.

Cazzani, A., Stochino, F., Turco, E.: On the whole spectrum of Timoshenko beams. Part I: a theoretical revisitation. Zeitschrift für angewandte Mathematik und Physik 67(2), 1–30 (2016)MathSciNetMATH

13.

Contrafatto, L., Cuomo, M., Fazio, F.: An enriched finite element for crack opening and rebar slip in reinforced concrete members. Int. J. Fract. 178(1–2), 33–50 (2012)CrossRef

14.

Contrafatto, L., Cuomo, M., Gazzo, S.: A concrete homogenisation technique at meso-scale level accounting for damaging behaviour of cement paste and aggregates. Comput. Struct. 173, 1–18 (2016)CrossRef

15.

Cuomo, M., Contrafatto, L., Greco, L.: A variational model based on isogeometric interpolation for the analysis of cracked bodies. Int. J. Eng. Sci. 80, 173–188 (2014)MathSciNetCrossRef

16.

Cuomo, M., dell’Isola, F., Greco, L., Rizzi, N.: First versus second gradient energies for planar sheets with two families of inextensible fibres: investigation on deformation boundary layers, discontinuities and geometrical instabilities. Compos, Part B Eng (2016)

17.

D’Annibale, F., Rosi, G., Luongo, A.: Linear stability of piezoelectric-controlled discrete mechanical systems under nonconservative positional forces. Meccanica 50(3), 825–839 (2015)MathSciNetCrossRefMATH

18.

Del Vescovo, D., Giorgio, I.: Dynamic problems for metamaterials: review of existing models and ideas for further research. Int. J. Eng. Sci. 80, 153–172 (2014)MathSciNetCrossRef

19.

Della Corte, A., Battista, A., dell’Isola, F.: Referential description of the evolution of a 2d swarm of robots interacting with the closer neighbors: perspectives of continuum modeling via higher gradient continua. Int. J. Non-Linear Mech. 80, 209–220 (2016)CrossRef

20.

dell’Isola, F., Cuomo, M., Greco, L., Della Corte, A.: Bias extension test for pantographic sheets: numerical simulations based on second gradient shear energies. J. Eng. Math. 1–31 (2016)

21.

dell’Isola, F., d’Agostino, M., Madeo, A., Boisse, P., Steigmann, D.: Minimization of shear energy in two dimensional continua with two orthogonal families of inextensible fibers: the case of standard bias extension test. J. Elast. 122(2), 131–155 (2016)MathSciNetCrossRefMATH

22.

dell’Isola, F., Della Corte, A., Giorgio, I., Scerrato, D.: Pantographic 2d sheets: discussion of some numerical investigations and potential applications. Int. J. Non-Linear Mech. 80, 200–208 (2016)CrossRef

23.

dell’Isola, F., Della Corte, A., Greco, L., Luongo, A.: Plane bias extension test for a continuum with two inextensible families of fibers: A variational treatment with lagrange multipliers and a perturbation solution. Int. J, Solids Struct (2015)

24.

dell’Isola, F., Giorgio, I., Andreaus, U.: Elastic pantographic 2d lattices: a numerical analysis on static response and wave propagation. Proceedings of the Estonian Academy of Sciences 64, 219–225 (2015)CrossRef

25.

dell’Isola, F., Giorgio, I., Pawlikowski, M., Rizzi, N.: Large deformations of planar extensible beams and pantographic lattices: heuristic homogenization, experimental and numerical examples of equilibrium. In: Proceedings of the Royal Society A, vol. 472, p. 20150790. The Royal Society (2016)

26.

dell’Isola, F., Lekszycki, T., Pawlikowski, M., Grygoruk, R., Greco, L.: Designing a light fabric metamaterial being highly macroscopically tough under directional extension: first experimental evidence. Zeitschrift für angewandte Mathematik und Physik 66, 3473–3498 (2015)MathSciNetCrossRefMATH

27.

dell’Isola, F., Steigmann, D.: A two-dimensional gradient-elasticity theory for woven fabrics. J. Elast. 18, 113–125 (2015)MathSciNetCrossRefMATH

28.

dell’Isola, F., Steigmann, D., Della Corte, A.: Synthesis of fibrous complex structures: designing microstructure to deliver targeted macroscale response. Appl. Mech. Rev. 67(6), 060–804 (2015)

29.

Di Carlo, A., Rizzi, N., Tatone, A.: Continuum modelling of a beam-like latticed truss: identification of the constitutive functions for the contact and inertial actions. Meccanica 25(3), 168–174 (1990)MathSciNetCrossRefMATH

30.

Di Egidio, A., Luongo, A., Paolone, A.: Linear and non-linear interactions between static and dynamic bifurcations of damped planar beams. Int. J. Non-Linear Mech. 42(1), 88–98 (2007)CrossRefMATH

31.

Everstine, G., Pipkin, A.: Boundary layers in fiber-reinforced materials. J. Appl. Mech. 40, 518–522 (1973)CrossRefMATH

32.

Gabriele, S., Rizzi, N., Varano, V.: On the postbuckling behaviour of thin walled beams with in-plane deformable cross-sections. In: Civil-comp proceedings (2013)

33.

Giorgio, I.: Numerical identification procedure between a micro-cauchy model and a macro-second gradient model for planar pantographic structures. Zeitschrift für angewandte Mathematik und Physik 67(4)(95) (2016)

34.

Giorgio, I., Della Corte, A., dell’Isola, F., Steigmann, D.: Buckling modes in pantographic lattices. C. R, Mec (2016)

35.

Giorgio, I., Grygoruk, R., dell’Isola, F., Steigmann, D.: Pattern formation in the three-dimensional deformations of fibered sheets. Mech. Res. Commun. 69, 164–171 (2015)CrossRef

36.

Goda, I., Assidi, M., Ganghoffer, J.: A 3d elastic micropolar model of vertebral trabecular bone from lattice homogenization of the bone microstructure. Biomech. Model. Mechanobiol. 13, 53–83 (2014)CrossRef

37.

Greco, L., Giorgio, I., Battista, A.: In plane shear and bending for first gradient inextesible pantographic sheets: numerical study of deformed shapes and global constraint reactions. Math. Mech. Solids, 1081286516651324 (2016)

38.

Grillo, A., Wittum, G., Tomic, A., Federico, S.: Remodelling in statistically oriented fibre-reinforced composites and biological tissues. Math. Mech. Solids 20, 1107–1129 (2015)MathSciNetCrossRefMATH

39.

Harrison, P.: Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh. Compos. Part A Appl. Sci. Manuf. 81, 145–157 (2016)CrossRef

40.

Harrison, P., Anderson, D., Alvarez, M.F., Bali, E., Mateos, Y.: Measuring and modelling the in-plane bending stiffness and wrinkling behaviour of engineering fabrics (2016)

41.

Hilgers, M., Pipkin, A.: Elastic sheets with bending stiffness. Q. J. Mech. Appl. Math. 45, 57–75 (1992)MathSciNetCrossRefMATH

42.

Hilgers, M., Pipkin, A.: Energy-minimizing deformations of elastic sheets with bending stiffness. J. Elast. 31, 125–139 (1993)MathSciNetCrossRefMATH

43.

Hilgers, M., Pipkin, A.: Bending energy of highly elastic membranes ii. Q. Appl. Math 54, 307–316 (1996)MathSciNetCrossRefMATH

44.

Hu, M., Kolsky, H., Pipkin, A.: Bending theory for fiber-reinforced beams. J. Compos. Mater, 235–249 (1985)

45.

dell Isola, F., Seppecher, P., Della Corte, A.: The postulations á la d alembert and á la cauchy for higher gradient continuum theories are equivalent: a review of existing results. In: Proceedings of the Royal Society A, vol. 471, p. 20150415. The Royal Society (2015)

46.

Luongo, A., D’annibale, F.: Bifurcation analysis of damped visco-elastic planar beams under simultaneous gravitational and follower forces. Int. J. Mod. Phys. B 26(25), 1246,015 (2012)

47.

Luongo, A., Zulli, D., Piccardo, G.: A linear curved-beam model for the analysis of galloping in suspended cables. J. Mech. Mater. Struct. 2(4), 675–694 (2007)CrossRef

48.

Madeo, A., Della Corte, A., Greco, L., Neff, P.: Wave propagation in pantographic 2d lattices with internal discontinuities (2014). arXiv:1412.3926

49.

Pietraszkiewicz, W., Eremeyev, V.: On natural strain measures of the non-linear micropolar continuum. Int. J. Solids Struct. 46(3), 774–787 (2009)MathSciNetCrossRefMATH

50.

Pignataro, M., Rizzi, N., Luongo, A.: Stability, Bifurcation and Postcritical Behaviour of Elastic Structures, vol. 39. Elsevier (2013)

51.

Pignataro, M., Rizzi, N., Ruta, G., Varano, V.: The effects of warping constraints on the buckling of thin-walled structures. J. Mech. Mater. Struct. 4(10), 1711–1727 (2010)CrossRef

52.

Pignataro, M., Ruta, G., Rizzi, N., Varano, V.: Effects of warping constraints and lateral restraint on the buckling of thin-walled frames. ASME Int. Mech. Eng. Congr. Expo. 10(B), 803–810 (2010)

53.

Pipkin, A.: Generalized plane deformations of ideal fiber-reinforced materials. Q. Appl. Math 32, 253–263 (1974)CrossRefMATH

54.

Pipkin, A.: Energy changes in ideal fiber-reinforced composites. Q. Appl. Math 35, 455–463 (1978)MathSciNetCrossRefMATH

55.

Pipkin, A.: Some developments in the theory of inextensible networks. Q. Appl. Math 38, 343–355 (1980)MathSciNetCrossRefMATH

56.

Placidi, L., Andreaus, U., Giorgio, I.: Identification of two-dimensional pantographic structure via a linear d4 orthotropic second gradient elastic model. J. Eng. Math. 1–21 (2016)

57.

Placidi, L., Barchiesi, E., Turco, E., Rizzi, N.: A review on 2d models for the description of pantographic fabrics. Zeitschrift für angewandte Mathematik und Physik 67(5)(121) (2016)

58.

Placidi, L., Greco, L., Bucci, S., Turco, E., Rizzi, N.: A second gradient formulation for a 2d fabric sheet with inextensible fibres. Zeitschrift für angewandte Mathematik und Physik 67(5)(114) (2016)

59.

Rahali, Y., Giorgio, I., Ganghoffer, J., Dell’Isola, F.: Homogenization à la piola produces second gradient continuum models for linear pantographic lattices. Int. J. Eng. Sci. 97, 148–172 (2015)MathSciNetCrossRef

60.

Rivlin, R.: Plane strain of a net formed by inextensible cords. In: Collected Papers of RS Rivlin, pp. 511–534. Springer (1997)

61.

Rizzi, N., Varano, V.: The effects of warping on the postbuckling behaviour of thin-walled structures. Thin-Walled Struct. 49(9), 1091–1097 (2011)CrossRef

62.

Rizzi, N., Varano, V.: On the postbuckling analysis of thin-walled frames. In: Thirteenth international conference on civil, structural and environmental engineering computing. Civil-Comp Press (2011)

63.

Rizzi, N., Varano, V., Gabriele, S.: Initial postbuckling behavior of thin-walled frames under mode interaction. Thin-Walled Struct. 68, 124–134 (2013)CrossRef

64.

Ruta, G., Pignataro, M., Rizzi, N.: A direct one-dimensional beam model for the flexural-torsional buckling of thin-walled beams. J. Mech. Mater. Struct. 1(8), 1479–1496 (2006)CrossRef

65.

Ruta, G., Varano, V., Pignataro, M., Rizzi, N.: A beam model for the flexural-torsional buckling of thin-walled members with some applications. Thin-Walled Struct. 46(7), 816–822 (2008)CrossRef

66.

Scerrato, D., Giorgio, I., Rizzi, N.: Three-dimensional instabilities of pantographic sheets with parabolic lattices: numerical investigations. Zeitschrift für angewandte Mathematik und Physik 67(3), 1–19 (2016)MathSciNetCrossRefMATH

67.

Scerrato, D., Zhurba Eremeeva, I., Lekszycki, T., Rizzi, N.: On the effect of shear stiffness on the plane deformation of linear second gradient pantographic sheets. ZAMM J. Appl. Math. Mech./Zeitschrift für Angewandte Mathematik und Mechanik (2016)

68.

Soubestre, J., Boutin, C.: Non-local dynamic behavior of linear fiber reinforced materials. Mech. Mater. 55, 16–32 (2012)CrossRef

69.

Turco, E., dell’Isola, F., Cazzani, A., Rizzi, N.: Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models. Zeitschrift für angewandte Mathematik und Physik 67 (2016)

70.

Turco, E., dell’Isola, F., Rizzi, N.L., Grygoruk, R., Müller, W.H., Liebold, C.: Fiber rupture in sheared planar pantographic sheets: numerical and experimental evidence. Mech. Res. Commun. 76, 86–90 (2016)

71.

Zhu, B., Yu, T., Tao, X.: Large deformation and slippage mechanism of plain woven composite in bias extension. Compos. Part A Appl. Sci. Manuf. 38(8), 1821–1828 (2007)CrossRef

Titel: A Review on Models for the 3D Statics and 2D Dynamics of Pantographic Fabrics
verfasst von: Emilio Barchiesi
Luca Placidi
Verlag: Springer Singapore
Buch: Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials
Print ISBN: 978-981-10-3796-2

Electronic ISBN: 978-981-10-3797-9

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-981-10-3797-9_14

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht