Skip to main content

2018 | OriginalPaper | Buchkapitel

12. Physics-of-Failure Approach for Electronics

verfasst von : Prabhakar V. Varde, Michael G. Pecht

Erschienen in: Risk-Based Engineering

Verlag: Springer Singapore

Aktivieren Sie unsere intelligente Suche um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Physics-of-failure (PoF) approach is integral part of IRBE as in this approach reliability of the component and systems is predicted based on scientific models for identification of applicable failure mechanism and evaluation degradation to arrive at time to failure. The traditional statistical approach for reliability evaluation can predict the probability of failure but incapable of providing information on instant of failure. The physics-of-failure approach as part of prognostics framework can predict failure in advance with acceptable level of uncertainty. PoF as an approach is extensively being applied for electronics reliability; hence, this chapter deals with PoF approach to electronics.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat R.R. Tummala, SOP: What is it and why? A new microsystem-integration technology paradigm-Moore’s law for system integration of minimized convergent systems of the next decades. IEEE Trans. Adv. Packag. 27(2), 241–249 (2004)CrossRef R.R. Tummala, SOP: What is it and why? A new microsystem-integration technology paradigm-Moore’s law for system integration of minimized convergent systems of the next decades. IEEE Trans. Adv. Packag. 27(2), 241–249 (2004)CrossRef
3.
Zurück zum Zitat Military Handbook, Reliability prediction of electronic equipment. MILHDBK-217F, Department of Defense, Washington, DC (1991) Military Handbook, Reliability prediction of electronic equipment. MILHDBK-217F, Department of Defense, Washington, DC (1991)
4.
Zurück zum Zitat M. Pecht, W.C. Kang, A critique of MIL-Hdbk-217E reliability prediction methods. IEEE Trans. Reliab. 37(5), 453–457 (1988)CrossRef M. Pecht, W.C. Kang, A critique of MIL-Hdbk-217E reliability prediction methods. IEEE Trans. Reliab. 37(5), 453–457 (1988)CrossRef
5.
Zurück zum Zitat P. Charpenel, P. Cavernes, V. Casanovas, J. Borowski, J.M. Chopin, Comparison between field reliability and new prediction methodology on avionics embedded electronics. Microelectron. Reliab. 38(6), 1171–1175 (1998)CrossRef P. Charpenel, P. Cavernes, V. Casanovas, J. Borowski, J.M. Chopin, Comparison between field reliability and new prediction methodology on avionics embedded electronics. Microelectron. Reliab. 38(6), 1171–1175 (1998)CrossRef
6.
Zurück zum Zitat M. Nilsson, Ö. Hallberg, A new reliability prediction model for telecommunication hardware. Microelectron. Reliab. 37(10), 1429–1432 (1997)CrossRef M. Nilsson, Ö. Hallberg, A new reliability prediction model for telecommunication hardware. Microelectron. Reliab. 37(10), 1429–1432 (1997)CrossRef
7.
Zurück zum Zitat JEP122H, Failure Mechanisms and Models for Semiconductor Devices (JEDEC Solid State Technology Association, 2016) JEP122H, Failure Mechanisms and Models for Semiconductor Devices (JEDEC Solid State Technology Association, 2016)
8.
Zurück zum Zitat J.W. McPherson, Reliability Physics and Engineering (Springer, New York, 2010), p. 171CrossRef J.W. McPherson, Reliability Physics and Engineering (Springer, New York, 2010), p. 171CrossRef
9.
Zurück zum Zitat K.C. Kapur, M. Pecht, Reliability Engineering (Wiley, New York, 2014)CrossRef K.C. Kapur, M. Pecht, Reliability Engineering (Wiley, New York, 2014)CrossRef
10.
Zurück zum Zitat P. Singh, P. Viswanadham, Failure Modes and Mechanisms in Electronic Packages (Springer Science & Business Media, 2012) P. Singh, P. Viswanadham, Failure Modes and Mechanisms in Electronic Packages (Springer Science & Business Media, 2012)
11.
Zurück zum Zitat R. Darveaux, K. Banerji, A. Mawer, G. Dody, Reliability of plastic ball grid array assembly, in Ball Grid Array Technology, ed. by J. Lau (McGraw-Hill, New York, 1995) R. Darveaux, K. Banerji, A. Mawer, G. Dody, Reliability of plastic ball grid array assembly, in Ball Grid Array Technology, ed. by J. Lau (McGraw-Hill, New York, 1995)
12.
Zurück zum Zitat W. Engelmaier, Fatigue life of leadless chip carriers solder joints during power cycling. IEEE Trans. Compon. Hybrids Manuf. Technol. 6, 232–237 (1983)CrossRef W. Engelmaier, Fatigue life of leadless chip carriers solder joints during power cycling. IEEE Trans. Compon. Hybrids Manuf. Technol. 6, 232–237 (1983)CrossRef
13.
Zurück zum Zitat O.H. Basquin, The exponential law of endurance tests. ASTM Proc. 10, 625–630 (1910) O.H. Basquin, The exponential law of endurance tests. ASTM Proc. 10, 625–630 (1910)
14.
Zurück zum Zitat L.F. Coffin Jr., A study of the effects of cyclic thermal stresses on a ductile metal. Trans. ASME 76, 931–950 (1954) L.F. Coffin Jr., A study of the effects of cyclic thermal stresses on a ductile metal. Trans. ASME 76, 931–950 (1954)
15.
Zurück zum Zitat S.S. Manson, Fatigue: A complex subject-some simple approximations. Exp. Mech. 5, 193–226 (1965)CrossRef S.S. Manson, Fatigue: A complex subject-some simple approximations. Exp. Mech. 5, 193–226 (1965)CrossRef
16.
Zurück zum Zitat J. Morrow, Cyclic plastic strain energy and fatigue of metals, in B. Lazan (ed.) STP43764S Internal Friction, Damping, and Cyclic Plasticity, STP43764S. ASTM International, West Conshohocken, PA, 1965, pp. 45–87. https://doi.org/10.1520/STP43764S J. Morrow, Cyclic plastic strain energy and fatigue of metals, in B. Lazan (ed.) STP43764S Internal Friction, Damping, and Cyclic Plasticity, STP43764S. ASTM International, West Conshohocken, PA, 1965, pp. 45–87. https://​doi.​org/​10.​1520/​STP43764S
17.
Zurück zum Zitat IPC-9701, Performance test methods and qualification requirements for surface mount solder attachments, Northbrook, IL, Jan. 2002 IPC-9701, Performance test methods and qualification requirements for surface mount solder attachments, Northbrook, IL, Jan. 2002
18.
Zurück zum Zitat M. Osterman, M. Pecht, Strain range fatigue life assessment of lead-free solder interconnects subject to temperature cycle loading. Solder. Surf. Mt. Technol. 19(2), 12–17 (2007)CrossRef M. Osterman, M. Pecht, Strain range fatigue life assessment of lead-free solder interconnects subject to temperature cycle loading. Solder. Surf. Mt. Technol. 19(2), 12–17 (2007)CrossRef
19.
Zurück zum Zitat C. Cohn, C. Harper (eds.), Failure-Free Integrated Circuit Packages (McGraw-Hill, New York, 2005) C. Cohn, C. Harper (eds.), Failure-Free Integrated Circuit Packages (McGraw-Hill, New York, 2005)
20.
Zurück zum Zitat M. Pecht (ed.), Handbook of Electronic Package Design (CRC Press, New York, 1991) M. Pecht (ed.), Handbook of Electronic Package Design (CRC Press, New York, 1991)
22.
Zurück zum Zitat C. Norris, A.H. Landzberg, Reliability of controlled collapse interconnections. IBM J. Res. Dev. 266–271 (1969)CrossRef C. Norris, A.H. Landzberg, Reliability of controlled collapse interconnections. IBM J. Res. Dev. 266–271 (1969)CrossRef
23.
Zurück zum Zitat N. Pan, et al., An acceleration model for Sn-Ag-Cu solder joint reliability under various thermal cycle conditions, in Proc. SMTA, pp. 876–883 (2005) N. Pan, et al., An acceleration model for Sn-Ag-Cu solder joint reliability under various thermal cycle conditions, in Proc. SMTA, pp. 876–883 (2005)
24.
Zurück zum Zitat Q. Haiyu, S. Ganesan, M. Pecht, No-fault-found and intermittent failures in electronic products. Microelectron. Reliab. 48(5), 663–674 (2008)CrossRef Q. Haiyu, S. Ganesan, M. Pecht, No-fault-found and intermittent failures in electronic products. Microelectron. Reliab. 48(5), 663–674 (2008)CrossRef
25.
Zurück zum Zitat M. Čepin, Reliability block diagram, in Assessment of Power System Reliability (Springer, London, 2011), pp. 119–123CrossRef M. Čepin, Reliability block diagram, in Assessment of Power System Reliability (Springer, London, 2011), pp. 119–123CrossRef
26.
Zurück zum Zitat C.A. Ericson, Fault tree analysis, in System Safety Conference, Orlando, Florida, pp. 1–9 (1999) C.A. Ericson, Fault tree analysis, in System Safety Conference, Orlando, Florida, pp. 1–9 (1999)
27.
Zurück zum Zitat J. Gu, M. Pecht, Prognostics and health management using physics-of-failure, in IEEE Reliability and Maintainability Symposium, 2008, pp. 481–487 J. Gu, M. Pecht, Prognostics and health management using physics-of-failure, in IEEE Reliability and Maintainability Symposium, 2008, pp. 481–487
28.
Zurück zum Zitat A. Ramakrishnan, M.G. Pecht, A life consumption monitoring methodology for electronic systems. IEEE Trans. Compon. Packag. Technol. 26(3), 625–634 (2003)CrossRef A. Ramakrishnan, M.G. Pecht, A life consumption monitoring methodology for electronic systems. IEEE Trans. Compon. Packag. Technol. 26(3), 625–634 (2003)CrossRef
29.
Zurück zum Zitat P. Chauhan, S. Mathew, M. Osterman, M. Pecht, In situ interconnect failure prediction using canaries. IEEE Trans. Device Mater. Reliab. 14(3), 826–832 (2014)CrossRef P. Chauhan, S. Mathew, M. Osterman, M. Pecht, In situ interconnect failure prediction using canaries. IEEE Trans. Device Mater. Reliab. 14(3), 826–832 (2014)CrossRef
30.
Zurück zum Zitat S. Mathew, M. Osterman, M. Pecht, A canary device based approach for prognosis of ball grid array packages, in IEEE Conference on Prognostics and Health Management (PHM), Denver, CO, 18–22 June 2012 S. Mathew, M. Osterman, M. Pecht, A canary device based approach for prognosis of ball grid array packages, in IEEE Conference on Prognostics and Health Management (PHM), Denver, CO, 18–22 June 2012
31.
Zurück zum Zitat A. Palmgren, Die lebensdauer von kugellagern. Veifahrenstechinik 68, 339–341 (1924). (Berlin) A. Palmgren, Die lebensdauer von kugellagern. Veifahrenstechinik 68, 339–341 (1924). (Berlin)
32.
Zurück zum Zitat M. Miner, Cumulative damage in fatigue. J. Appl. Mech. 67, AI59–AI64 (1945) M. Miner, Cumulative damage in fatigue. J. Appl. Mech. 67, AI59–AI64 (1945)
33.
Zurück zum Zitat S.D. Downing, D.F. Socie, Simple rain flow counting algorithms. Int. J. Fatigue 4(1), 31–40 (1982)CrossRef S.D. Downing, D.F. Socie, Simple rain flow counting algorithms. Int. J. Fatigue 4(1), 31–40 (1982)CrossRef
34.
Zurück zum Zitat Standard Practice for Cycle Counting in Fatigue Practices, ASTM Standard E1049-85 (2011) Standard Practice for Cycle Counting in Fatigue Practices, ASTM Standard E1049-85 (2011)
35.
Zurück zum Zitat K.D. Cluff, D. Robbins, T. Edwards, B. Barker, Characterizing the commercial avionics thermal environment for field reliability assessment. J. Inst. Environ. Sci. 40(4), 22–28 (1997) K.D. Cluff, D. Robbins, T. Edwards, B. Barker, Characterizing the commercial avionics thermal environment for field reliability assessment. J. Inst. Environ. Sci. 40(4), 22–28 (1997)
36.
Zurück zum Zitat N. Vichare, P. Rodgers, M. Pecht, Methods for binning and density estimation of load parameters for prognostics and health management. Int. J. Perform. Eng. 2(2), 149–161 (2006) N. Vichare, P. Rodgers, M. Pecht, Methods for binning and density estimation of load parameters for prognostics and health management. Int. J. Perform. Eng. 2(2), 149–161 (2006)
37.
Zurück zum Zitat A. Dasgupta, R. Doraiswami, M. Azarian, M. Osterman, S. Mathew, M. Pecht, The use of canaries for adaptive health management of electronic systems, in ADAPTIVE 2010, IARIA Conference, Lisbon Portugal, 21–26 Nov. 2010 A. Dasgupta, R. Doraiswami, M. Azarian, M. Osterman, S. Mathew, M. Pecht, The use of canaries for adaptive health management of electronic systems, in ADAPTIVE 2010, IARIA Conference, Lisbon Portugal, 21–26 Nov. 2010
38.
Zurück zum Zitat Y.Z. Rosunally, S. Stoyanov, C. Bailey, P. Mason, S. Campbell, G. Monger, I. Bell, Fusion Approach for Prognostics Framework of Heritage Structure. IEEE Trans. Reliab. 60(1), 3–13 (2011)CrossRef Y.Z. Rosunally, S. Stoyanov, C. Bailey, P. Mason, S. Campbell, G. Monger, I. Bell, Fusion Approach for Prognostics Framework of Heritage Structure. IEEE Trans. Reliab. 60(1), 3–13 (2011)CrossRef
39.
Zurück zum Zitat D.K. Han, M.G. Pecht, D.K. Anand, R. Kavetsky, Energetic material/systems prognostics, in 53rd Annual Reliability & Maintainability Symposium (RAMS) (2007) D.K. Han, M.G. Pecht, D.K. Anand, R. Kavetsky, Energetic material/systems prognostics, in 53rd Annual Reliability & Maintainability Symposium (RAMS) (2007)
40.
Zurück zum Zitat H.R. Shea, A. Gasparyan, H.B. Chan, S. Arney, R.E. Frahm, D. López, S. Jin, R.P. McConnell, Effects of electrical leakage currents on MEMS reliability and performance. IEEE Trans. Device Mater. Reliab. 4(2), 198–207 (2004)CrossRef H.R. Shea, A. Gasparyan, H.B. Chan, S. Arney, R.E. Frahm, D. López, S. Jin, R.P. McConnell, Effects of electrical leakage currents on MEMS reliability and performance. IEEE Trans. Device Mater. Reliab. 4(2), 198–207 (2004)CrossRef
41.
Zurück zum Zitat Y. Otsuka, T. Sato, T. Yoshiki, T. Hayashida, Multicore energy reduction utilizing canary FF, in IEEE 2010 International Symposium on Communications and Information Technologies (ISCIT), Tokyo, pp. 922–927, 26–29 Oct. 2010 Y. Otsuka, T. Sato, T. Yoshiki, T. Hayashida, Multicore energy reduction utilizing canary FF, in IEEE 2010 International Symposium on Communications and Information Technologies (ISCIT), Tokyo, pp. 922–927, 26–29 Oct. 2010
42.
Zurück zum Zitat B.H. Calhoun, A. Chandrakasan, Standby power reduction using dynamic voltage scaling and canary flip-flop structures. IEEE J. Solid State Circuits 39(9) (2004)CrossRef B.H. Calhoun, A. Chandrakasan, Standby power reduction using dynamic voltage scaling and canary flip-flop structures. IEEE J. Solid State Circuits 39(9) (2004)CrossRef
43.
Zurück zum Zitat J. Wang, A. Hoefler, B.H. Calhoun, An enhanced canary-based system with BIST for standby power reduction. IEEE Trans. Very Large Scale Integr. VLSI Syst. 19(5), 909–914 (2011)CrossRef J. Wang, A. Hoefler, B.H. Calhoun, An enhanced canary-based system with BIST for standby power reduction. IEEE Trans. Very Large Scale Integr. VLSI Syst. 19(5), 909–914 (2011)CrossRef
45.
Zurück zum Zitat D. Goodman, B. Vermeire, J. Ralston-Good, R. Graves, A board-level prognostic monitor for MOSFET TDDB, in IEEE Aerospace Conference, Mar. 2006 D. Goodman, B. Vermeire, J. Ralston-Good, R. Graves, A board-level prognostic monitor for MOSFET TDDB, in IEEE Aerospace Conference, Mar. 2006
46.
Zurück zum Zitat C.R. Keese, I. Giaever, A biosensor that monitors cell morphology with electrical field. IEEE Eng. Med. Biol. 13, 402–408 (1994)CrossRef C.R. Keese, I. Giaever, A biosensor that monitors cell morphology with electrical field. IEEE Eng. Med. Biol. 13, 402–408 (1994)CrossRef
47.
Zurück zum Zitat M.S. Petrovick, J.D. Harper, F.E. Nargi, E.D. Schwoebel, M.C. Hennessy, T.H. Rider, M.A. Hollis, Rapid sensors for biological-agent identification. Linc. Lab. J. 17(1), 63–84 (2007). (Special Issue: Chemical and Biological Defense) M.S. Petrovick, J.D. Harper, F.E. Nargi, E.D. Schwoebel, M.C. Hennessy, T.H. Rider, M.A. Hollis, Rapid sensors for biological-agent identification. Linc. Lab. J. 17(1), 63–84 (2007). (Special Issue: Chemical and Biological Defense)
48.
Zurück zum Zitat P. Chauhan, M. Osterman, M. Pecht, Canary approach for monitoring BGA interconnect reliability under temperature cycling, in The MFPT 2012 Proceedings (2012) P. Chauhan, M. Osterman, M. Pecht, Canary approach for monitoring BGA interconnect reliability under temperature cycling, in The MFPT 2012 Proceedings (2012)
49.
Zurück zum Zitat P. Lall, N. Islam, K. Rahim, J. Suhling, S. Gale, Leading indicators-of-failure for prognosis of electronic and MEMS packaging, in Proceedings of 54th Electronic Components & Technology Conference, 2004, pp. 1570–1578, Las Vegas, NV, 1–4 June 2004 P. Lall, N. Islam, K. Rahim, J. Suhling, S. Gale, Leading indicators-of-failure for prognosis of electronic and MEMS packaging, in Proceedings of 54th Electronic Components & Technology Conference, 2004, pp. 1570–1578, Las Vegas, NV, 1–4 June 2004
Metadaten
Titel
Physics-of-Failure Approach for Electronics
verfasst von
Prabhakar V. Varde
Michael G. Pecht
Copyright-Jahr
2018
Verlag
Springer Singapore
DOI
https://doi.org/10.1007/978-981-13-0090-5_12

Neuer Inhalt