Skip to main content
Log in

Brittle fracture in compression

  • Published:
International Journal of Fracture Aims and scope Submit manuscript

Abstract

The initiation and propagation of microfractures and their contribution to material failure in compression are examined. The early part of the fracture process, the lateral and the axial yield points of the stress-strain curves, are identified with the onset of microfracture, respectively at the tensile and the compressive stress concentrations of the elastic flaw boundary. Later stages, including the initiation of inclined shear fractures, the mobilization of total resistance and the reduction of strength to the residual level, are discussed in terms of a modified Coulomb model.

Résumé

On examine l'amorçage et la propagation de microruptures ainsi que leur contribution à la rupture d'un matériau soumis à compression. Les premiers stades du processus de rupture, lorsque l'on atteint les limites élastiques latérale et axiale sur les courbes contraintes-déformations, sont apparentés au déclenchement de microfissures aux frontières élastiques d'un défaut, où se développent respectivement des concentrations de contraintes detraction et decompression.

Les stades ultérieurs, qui comportent l'amorçage d'une rupture incinée cisaillement, la mobilisation de la résistance totale et la réduction de la résistance du matériau a sa résistance résiduelle, sont discutés en recourant à un modèle modifié de Coulomb.

Zusammenfassung

Die Einleitung und die Ausbreitung von Mikrobrüchen und jhr Beitrag zum Bruch von Material unter Druck werden untersucht. Das Anfangsstadium der Bruchmekanismus, der laterale and der axiale Punkt der Elastizitätsgrenze der Spannungsdehnungskurven werden mit der Auslösung des Mikrobruches, an den Zug sowohl als an den Druckspannungskonzentrationen an der elastischen Fehlergrenze identifiziert. Spätere Zustände, einschließlich die Einleitung von geneigten Scherbrüchen, der Einsatz der totalen Festigkeit, und die Verminderung der Festigkeit bis an den Restbestand werden mit Hilfe eines veränderten Modells von Coulomb analysiert.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. A. A. Griffith, Int. Congr. Appl. Mech., Delft (1924) 55.

    Google Scholar 

  2. E. Z. Lajtai, Tectonophysics, 11 (1971) 129.

    Google Scholar 

  3. E. Z. Lajtai, Int. J. Rock Mech. Min. Sci., 9 (1972) 569.

    Google Scholar 

  4. V. Nesetova and E. Z. Lajtai, Int. J. Rock Mech. Min. Sci., 10 (1973) 265.

    Google Scholar 

  5. S. Peng and A. M. Johnson, Int. J. Rock Mech. Min. Sci., 9 (1972) 37.

    Google Scholar 

  6. W. R. Wawersik and W. F. Brace, Rock Mech., 3 (1971) 61.

    Google Scholar 

  7. G. C. Sih, J. of Eng. Frac. Mech., 5 (1973) 365.

    Google Scholar 

  8. F. A. McClintock and J. Walsh, Fourth U.S. Natl. Congr. Appl. Mech., Berkeley (1962) 1015.

  9. E. Hoek and Z. T. Bieniawski, Tech. Report, Rock Mech. Div. S. Afr. Council Scientific and Ind. Res., 1965.

  10. A. J. Durelli and V. Parks, Proc. Fourth U.S. Natl. Congr. Appl. Mech., Berkeley (1962) 931.

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Lajtai, E.Z. Brittle fracture in compression. Int J Fract 10, 525–536 (1974). https://doi.org/10.1007/BF00155255

Download citation

  • Received:

  • Revised:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00155255

Keywords

Navigation