Summary
Long term creep and recovery test results of wood under a bending load of 10 MPa stress and subjected to relative humidity cycling are presented. In spite of the vast number of humidity cycles during these tests, the results do not give evidence of an existence of a mechano-sorptive creep limit. The results also indicate that the recovery is not complete on unloading when the humidity is cycled. A mechano-sorptive model that fits the test results is proposed. According to the model, the elastic bending deflection in a cyclic load of 10—3 MPa and subjected to natural outdoor relative humidity can be about doubled to account for the creep under ten years loading.
Similar content being viewed by others
References
Boyd, J. D. 1982: An anatomical explanation for visco-elastic and mechano-sorptive creep in wood and effects of loading rate on strength. In: Baas, P. (Ed.): New perspectives in Wood Anatomy., Hague: Nijhoff/Junk, p. 171–222
Hunt, D. G., Shelton, C. F. 1988: Longitudinal moisture-shrinkage coefficients of softwood at the mechano-sorptive creep limit. Wood Sci. Technol. 23: 323–333
Mohager, S. 1987: Studier av krypning hos trä (Studies of creep of wood, in Swedish). Doctoral dissertation. Kungliga Tekniska Högskolan, Stockholm, Sweden
Toratti, T. 1988: The creep properties of Kerto-Laminated Veneer Lumber. Report 8. Laboratory of Structural Engineering and Building Physics. Helsinki University of Technology
Toratti, T. 1991: Creep of wood in varying environment humidity. Part I: Simulation of creep. Report 19. Laboratory of Structural Engineering and building Physics, Helsinki University of Technology
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mohager, S., Toratti, T. Long term bending creep of wood in cyclic relative humidity. Wood Sci.Technol. 27, 49–59 (1992). https://doi.org/10.1007/BF00203409
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00203409