Abstract
An SEM study was made of the micromechanism of fracture in SiC particle-reinforced 6061 aluminium composites. The fracture toughness tests on the composites with SiC volume fractions of 0%, 10% and 20% were conducted on single-edge notched sheet specimens. Both qualitative observations of void nucleation at the notch root of the composite samples and quantitative measurements of crack profiles are made to assess the special role of the particle effects in these composites. The results are discussed with respect to the micromechanism of particle breakage and interface debonding and their effect on the nucleation and propagation of microcracks. Two kinds of void are defined to explain the facts that Al/SiC is brittle macroscopically and ductile microscopically. The direction of crack propagation in Al/SiC and the microstructure in the tip region of the crack are also studied with these results.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
D. B. Flinn, M. Ruhle and A. G. Evans, Acta Metall. 37 (1989) 3001.
X. Ge, D. Zhang and D. Ju, in “Advances in Constitutive Laws for Engineering Materials” Vol. 1, edited by J. Fan and S. Murakami (International Academic Publishers, Chongging, China, 1989) p. 497.
S. V. Nair, J. K. Tien and R. C. Bates, Int. Metal. Rev. 30 (1985) 275.
A. D. Divecha, S. G. Fishman and S. D. Kamarkar, J. Metals 33 (1981) 12.
A. D. Divecha and S. G. Fishman, SAMPE Q. April (1981) 40.
D. L. Davidson, Metall. Trans. 22A (1991) 113.
B. Roebuck and J. D. Lord, Mater. Sci. Technol. 6 (1990) 1199.
M. J. Birt and W. S. Johnson, in “Fundamental Relationship between Microstructure and Mechanical Properties of Metal Matrix Composites”, edited by P. K. Liaw and M. N. Gungor, (MMS, California, USA, 1990) p. 71.
A. K. Vasudevan, O. Richmond, F. Zok and J. D. Embury, Mater. Sci. Eng. A107 (1989) 63.
J. J. Lewandowski, C. Liu and W. H. Hunt, Jr. ibid. A107 (1989) 241.
P. Mummery and B. Derby, in “Fundamental Relationship between Microstructure and Mechanical Properties of Metal Matrix Composites”, edited by P. K. Liaw and M. N. Gungor (MMS, 1990) p. 161.
C. A. Handwerker, M. D. Vandin, U. R. Kattner, and D. J. Lee, in “Metal-Ceramic Interface”, Acta-Scripta Metall. Proc. Ser 4, edited by M. Ruhle, A. G. Evans, M. F. Ashby and J. P. Hirxx (Pergamon Press, Oxford, 1990) p. 129.
J.-D. Lee, M. D. Vandin, C. A. Handwerker, and U. R. Kattner, in “High Temperature/High Performance Composites”, edited by F. D. Lemkey, S. G. Fishman, A. G. Evans and J. R. Strife (MRS, Pittsburgh, USA, 1988) p. 357.
W. A. Logsdon and P. K. Liaw, Eng. Fract. Mech. 24 (1986) 737.
W. F. Brown Jr and J. E. Srawley, ASTM STP 40 (American Society for Testing and Materials, Philadelphia, PA, 1966).
J. Rudel, J. F. Kelly and B. R. Lawn, J. Am. Ceram. Soc. 73 (1990) 3313.
X. Ge, D. Zhang and D. Ju, Proc. ICCM-7 4 (1989) 36.
H. Lagace and D. J. Lloyd, Can. Metall. Q. 28 (1989) 145.
Z. Wang, and R. J. Zhang, Metall. Trans. 22A (1991) 1585
X. Ge and S. Schmauder, Mater. Sci. Eng. A168 (1993) 93–97.
M. H. Poech and H. F. Fischmeister, Acta Metall. Mater. 40 (1992) 487.
M. Van Den Burg and J. Th. M. De Hosson, Acta Metall. Mater. 40 Suppl. (1992) 281.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ge, X., Schmauder, S. Micromechanism of fracture in Al/SiC composites. JOURNAL OF MATERIALS SCIENCE 30, 173–178 (1995). https://doi.org/10.1007/BF00352147
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00352147