Skip to main content
Log in

Infrared spectral characteristics and surface inactivation of wood at high temperatures

  • Published:
Wood Science and Technology Aims and scope Submit manuscript

Summary

Spectra resulting from chemical changes in white spruce [Picea glauca (Moench) Voss] microsections heated in air or nitrogen at high temperatures (100 to 240°C) were continuously recorded on an infrared spectrophotometer.

A significant change occurred in the intensity of the 1730 cm-1 band which indicates a carbonyl absorption of carboxyl and ester groups of wood. This intensity initially decreased and the increased at a greater rate. The time periods to reach the minimum inflection point, termed the times to initiate a significant oxidative carboxylation or oxidation, showed a good curvilinear relationship with heating temperatures.

Quantification of this time-temperature relationship required to reach a significant level of oxidation was achieved, using wood microsections that had extractives removed to varying degrees. It was concluded that the extractives served only as catalysts for oxidation. When drying wood at temperatures over 180°C, in addition to oxidation, pyrolytic degradation occurred.

Chemical evidence was further confirmed by tests of plywood panels bonded with phenolformaldehyde glue. Three separate types of veneers were investigated—non-extracted, acetone extracted, and veneer with the surface chemically stabilized by treatment with sodium borohydride. The results suggest that the time period to reach a significant level of oxidative carboxylation is also the time period to initiate a wood surface inactivated to polymer adhesion.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  • Canadian Standards Association. 1961. Douglas-fir plywood. CSA Standard 0-121 1961. p. 15.

  • Chow, S.-Z. 1969. A kinetic study of the polymerization of phenol-formaldehyde resin in the presence of cellulosic materials. Wood Sci. 1 (4): 215–221.

    Google Scholar 

  • — 1969. Method for determining degree of cure of phenolic resin. For. Prod. J. 19: 21–29.

    Google Scholar 

  • Hancock, W. V. 1964. The influence of native fatty acids on the formation of glue bonds with heat-treated wood. Ph. D. thesis, Faculty For., Univ. of British Columbia, Vancouver. pp. 176.

    Google Scholar 

  • Hemingway, R. W. 1967. Thermal instability of fats and water absorbency of yellow birch wood. Ph. D. thesis. Dept. For., Univ. of Michigan, Ann Arbor. pp. 157.

    Google Scholar 

  • Higgins, H. G. 1958. The degradation of cellulose in air at 250°C as shown by infrared spectroscopic examination. J. Polym. Sci. 28 (118): 645–648.

    Google Scholar 

  • Jurecic, A. 1966. The basic principles of adhesion—a survey. Tappi 49: 306–310.

    Google Scholar 

  • Liang, C. Y., Marchessault, R. H. 1959. Infrared spectra of crystalline polysaccharides. I. Hydrogen bonds in native celluloses. J. Polym. Sci. 37: 385–395.

    Google Scholar 

  • Major, W. D. 1958. The degradation of cellulose in oxygen and nitrogen at high temperatures. Tappi 41 (9): 530–537.

    Google Scholar 

  • Marchessault, R. H. 1962. Application of infrared spectroscopy to cellulose and wood polysaccharides. Pure Appl. Chem. 5: 107–129.

    Google Scholar 

  • Northcott, P. L. 1957. The effect of dryer temperatures upon the gluing properties of Douglas-fir veneer. For. Prod. J. 7: 10–15.

    Google Scholar 

  • Perlin, A. S. 1952. Thermal decarboxylation of uronic acid. Can. J. Chem. 30: 278–290.

    Google Scholar 

  • Stamm, A. J. 1964. Wood and Cellulose Science. The Ronald Press Co., New York. p. 294–311.

    Google Scholar 

  • Stumbo, D. A. 1964. Influence of surface aging prior to gluing on bond strength of Douglas-fir and redwood. For. Prod. J. 14: 582–589.

    Google Scholar 

  • Tang, M. M., Bacon, R. 1964. Carbonization of cellulose fibers. I. Low temperature pyrolysis. Carbon 2: 211–220.

    Google Scholar 

  • Teratani, F., Miyazaki, K. 1968. Effect of the thermal treatment on wood hemicelluloses. I. The change of arabinogalactan by heating. J. Japan Wood Res. Soc. 14 (2): 91–97.

    Google Scholar 

  • Timell, T. E. 1965. Wood hemicellulose. Part II. In: Advances in Carbohydrate Chemistry, Vol. 19. Ed. M. L. Wolfrom, Academic Press, New York. p. 409–483.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Additional information

The author wishes to thank Miss D. Bouchard and Mr. H. N. Mukai for their assistance in the experiments. Appreciation also is due to Mr. H. MacLean for a critical review of this paper.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Chow, SZ. Infrared spectral characteristics and surface inactivation of wood at high temperatures. Wood Science and Technology 5, 27–39 (1971). https://doi.org/10.1007/BF00363118

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00363118

Keywords

Navigation