Abstract
An investigation has been made of the effect of resin properties on the transverse cracking behaviour of glass fibre-reinforced polyester resin three-ply laminates. The polyester resin properties were modified by the addition of a flexibilizing resin to produce five resin systems with failure stresses ranging from 1.75 to 11.1%. The mechanical properties of the resins which were determined, are observed to affect the stress level at which transverse cracking is initiated and the nature of the cracking behaviour. If fibre bunching is taken into account the Kies strain magnification theory can predict the general trend of the results. However, it is concluded that strain-rate effects associated with fibre bunching are worthy of further investigation.
Similar content being viewed by others
References
K. W. Garret andJ. E. Bailey,J. Mater. Sci. 12 (1977) 157.
L. J. Broutman andS. Saku, “Progressive Damage of a Glass Reinforced Plastic During Fatigue”, Proceedings of the 24th Annual Technical Conference, SPI Reinforced Plastics/Composites Division, Paper 11-D, New York (1969).
J. A. Kies, U.S. Naval Research Laboratory, Report No. 5752 (1962).
R. E. Lavergood andO. Ishai, Polymer Eng. Sci.11 (1971) 226.
G. T. Stevens andA. W. Lupton,J. Mater. Sci. 11 (1976) 569.
G. D. Sims, Private Communication, 1977.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Garrett, K.W., Bailey, J.E. The effect of resin failure strain on the tensile properties of glass fibre-reinforced polyester cross-ply laminates. J Mater Sci 12, 2189–2194 (1977). https://doi.org/10.1007/BF00552239
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00552239