Abstract
The compressive behaviour of Sn-Pb alloys is studied with materials of conventionally dendritic structure and non-dendritic (rheocast) structure obtained through mechanical stirring during solidification. The alloys are found to deform similarly in the fully solid state but their behaviour becomes very different in the semi-solid range depending on the solidification mode. The holding time in the semi-solid state before compression also affects the mechanical properties: the influence of these two parameters is discussed in terms of the initial structure of the alloy and its evolution. Advantages of using semi-solid materials in metal forming processes are also presented.
Similar content being viewed by others
References
P. A. Joly andR. Mehrabian,J. Mater. Sci. 11 (1976) 1393.
M. C. Flemings, Rheocasting, MCIC 78-35 (1978).
C. Millière, J. F. Secondé, P. Sécordel andM. Suéry,Mém. et Etudes Sci. Rev. Mét. June, July–August80 (1983) 313, 355.
V. Laxmanan andM. C. Flemings,Metall. Trans. 11A (1980) 1927.
M. Suery andM. C. Flemings,ibid. 13A (1982) 1809.
M. C. Flemings, Machine Casting of Ferrous Alloys, AMMRC CTR 75-22 (1975).
S. D. Ridder, F. C. Reyes, S. Chakravorty, R. Mehrabian, J. D. Nauman, J. H. Chen andH. J. Klein,Metall. Trans. 9B (1978) 415.
S. A. Metz andM. C. Flemmings,Trans. AFS 77 (1969) 329.
I. M. Lifshitz andV. V. Slyozov,J. Phys. Chem. Solids 19 (1961) 35.
C. Wagner,Z. Elektrochem. 65 (1961) 581.
T. K. Kang andD. N. Yoon,Metall. Trans. 9A (1978) 433.
C. H. Kang andD. N. Yoon,ibid. 12A (1981) 65.
T. Z. Kattamis, J. C. Coughlin andM. C. Flemings,Trans. Met. Soc. AIME 239 (1967) 1504.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Secondé, J.F., Suéry, M. Effect of solidification conditions on deformation behaviour of semi-solid Sn-Pb alloys. J Mater Sci 19, 3995–4006 (1984). https://doi.org/10.1007/BF00980763
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00980763