Abstract
A method for applying zirconia barrier coatings using a sol-gel method is described. The coatings of 8 wt % yttria-stabilized zirconia are applied by spin coating a solution containing zirconium alkoxides and yttrium acetate on to stainless steel substrates. Crystallization of the films was observed for thermal treatments in the range 750 to 1050° C. Excellent adhesion at the interface, due to significant coating-substrate interfacial reactions, indicates that this sol-gel route is a feasible method for applying zirconia coatings.
Similar content being viewed by others
References
R. J. Bratton andS. K. Lau, in “Advances in Ceramics,” Vol. 3, edited by A. H. Heuer and L. W. Hobbs (American Ceramic Society, Columbus, Ohio, 1981) p. 226.
A. G. Evans, D. B. Marshall andN. H. Burlingame,ibid.in p. 202.
D. R. Uhlmann, B. J. J. Selinski andG. E. Wnek, in “Better Ceramics Through Chemistry,” Materials Research Society Symposia Proceedings Vol. 32, edited by C. J. Brinker (Elsevier, New York, 1984) p. 59.
M. A. C. G. Van De Graaf andA. J. Burggraaf. in “Advances in Ceramics,” Vol. 3, edited by A. H. Heuer and L. W. Hobbs (American Ceramic Society, Columbus, Ohio, 1981) p. 744.
J. C. Debsikdar,J. Non-Cryst. Solids 86 (1986) 231.
D. E. Bornside, C. W. Macosko andL. E. Scriven,J. Imaging Technol. 13 (1987) 122.
A. Srivasta andM. Dongare,Mater. Lett. 3 (1987) 111.
ASTM Designation C633-79. “Standard Test Method for Adhesion or Cohesive Strength of Flame-Sprayed Coatings” (American Society for Testing and Materials, Philadelphia, Pennsylvania, 1979).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shane, M., Mecartney, M.L. Sol-gel synthesis of zirconia barrier coatings. J Mater Sci 25, 1537–1544 (1990). https://doi.org/10.1007/BF01045347
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01045347