Abstract
Blends of polypropylene and nylon-6 extruded into ribbons at varying draw ratios generated laminar morphologies under our conditions. For the binary system, the size and distribution of the dispersed phase is coarse. The addition of an ionomer to the nylon prior to blending compatibilized the phases and produced much finer domains. The tensile properties of the virgin matrix material respond to the draw ratio in a parabolic manner attaining a maximum at intermediate values. Blending with nylon-6 attenuates the effect without improving the tensiles markedly. The compatibilized system however demonstrates greatly improved mechanical properties.
Similar content being viewed by others
References
J. M. Starita,Trans. Soc. Rheol. 16 (1972) 339.
W. M. Barentsen andD. Heikens,Polymer 14 (1973) 579.
D. Heikens andW. M. Barentsen,ibid. 18 (1977) 69.
T. Kunori andP. H. Geil,J. Macromol. Sci.-Phys. B18 (1980) 93, 135.
A. P. Plochocki,Polym. Engng Sci. 23 (1983) 618.
K. Min, J. L. White, J. F. Fellers,J. Appl. Polym. Sci. 29 (1984) 2117.
S. Endo, K. Min, J. L. White andT. Kyu,Polym. Engng Sci. 26 (1986) 45.
B. D. Favis, J. P. Chalifoux andP. Van Gheluwe,SPE Technical Papers 33 (1987) 1326.
B. D. Favis andJ. P. Chalifoux,Polym. Engng Sci. 27 (1987) 1591.
J. R. Stell, D. R. Paul, J. W. Barlow,Polym. Engng Sci. 16 (7) 496 (1976).
N. P. Krasmikova, E. V. Kotova, G. V. Vinogradov andZ. Pelzbauer,J. Appl. Polym. Sci. 22 (1978) 2081.
M. V. Tsebrenko, N. M. Renzanova andG. V. Vinogradov,Polym. Engng Sci. 20 (1980) 1023.
P. Albihn, P. Franzen, J. Kubat andM. Rigdahl,J. Appl. Polym. Sci. 32 (1986) 4837.
P. M. Subramanian,Polym. Engng Sci. 25 (1985) 483.
P. M. Subramanian andV. Mehra,ibid. 27 (1987) 663.
V. E. Dreval, G. V. Vinogradov, E. P. Plotnikova, M. P. Zabugina, N. P. Krasnikova, E. V. Kotova andZ. Pelzbauer,Rheol Acta 22 (1983) 102.
J. J. Elmendorp,Polym. Engng Sci. 26 (1986) 418.
M. R. Kamal, I. A. Jinnah andL. A. Utracki,ibid. 24 (1984) 1337.
J. H. Briston, “Plastic Films”, 2nd Edn, Longman, New York (1983) pp. 19, 51.
P. Galli, S. Danesi andT. Simonazzi,Polym. Engng Sci. 24 (1984) 544.
F. Ide andA. Hasegawa,J. Appl. Polym. Sci. 18 (1974) 963.
D. Braun andU. Eisenlohr,Kunstoffe 65 (1975) 9.
B. R. Liang, J. L. White, J. E. Spruiell andB. Goswami,J. Appl. Polym. Sci. 28 (1983) 2011.
H. K. Chuang andC. D. Han,Adv. Chem. 206 (1984) 172.
K. Min, J. L. White andJ. F. Fellers,Polym. Engng Sci. 24 (1984) 1327.
W. J. MacKnight, R. W. Lenz, P. V. Musto andR. J. Somani,ibid. 25 (1985) 1124.
C. D. Han andH. K. Chuang,J. Appl. Polym. Sci. 30 (1985) 2431, 2457.
L. A. Utracki, M. Dumoulin andP. Toma,Polym. Engng Sci. 26 (1986) 34.
L. D'Orazio, C. Mancarella, E. Martuscelli, A. Casale, A. Filipi andF. Speroni,J. Mater. Sci. 21 (1986) 989.
E. C. Bernhardt, “Processing of Thermoplastic Materials” SPE Plastics Engineering Series (1974) p. 258.
H. J. Yoo,Polym. Engng Sci. 27 (1987) 192.
H. Brody,J. Appl. Polym. Sci. 31 (1986) 2753.
L. E. Nielsen, “Mechanical Properties of Polymers and Composites”, Vol. 2, Dekker, New York (1974) p. 285.
M. J. Shankernarayanan, D. C. Sun, M. Kojima andJ. H. Magill,Int. Pol. Processing 1 (1987) 66.
B. Brew andI. M. Ward,Polymer 19 (1978) 1338.
M. A. Hallam, D. L. M. Cansfield, I. M. Ward andG. Pollard,J. Mater. Sci. 21 (1986) 4199.
P. G. Andersen, S. H. Carr,Polym. Engng Sci. 16 (1976) 217.
J. W. Ladbury,Plast. Instit., Trans. 28 (1960) 184.
I. Lee, S. Turner andR. T. Woodhams,Pol. Compos. 3 (1982) 212.
H. Voss, J. H. Magill andK. Friedrich,J. Appl. Polym. Sci. 33 (1987) 1745.
C. L. Beatty andW. J. Stauffer,Adv. Chem. 154 (1976) 112.
P. Van Gheluwe, to be published.
A. Rudin andH. P. Schreiber,Polym. Engng Sci. 23 (1983) 422.
D. Campbell andM. M. Qayyum,J. Polym. Sci. 18 (1980) 83.
L. Bartosiewicz andC. J. Kelly,Adv. Pol. Technol. 7 (1987) 21.
S. L. Sakellarides andA. J. McHugh,Rheol. Acta. 26 (1987) 64.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Van Gheluwe, P., Favis, B.D. & Chalifoux, J.P. Morphological and mechanical properties of extruded polypropylene/nylon-6 blends. J Mater Sci 23, 3910–3920 (1988). https://doi.org/10.1007/BF01106813
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01106813