Skip to main content
SpringerLink
Log in

Cast magnesium alloys for elevated temperature applications

  • Review
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

The alloy development, microstructure, properties and uses of cast magnesium alloys for elevated temperature applications are reviewed. The alloying principles and strengthening mechanisms of magnesium are discussed to identify the potential alloy systems for elevated temperature applications in automotive and aerospace industries. It is concluded that the Mg-Zr family of sand cast alloys exhibit adequate mechanical properties at both ambient and elevated temperatures for aerospace applications, and Ca-modified sand cast AS41 alloy might provide a cost-effective alternative for the Zr-containing alloys. For diecasting applications, no current alloy systems meets the requirements of good high temperature properties, acceptable castability and low cost for critical automotive components, future development is especially needed in this area. Development of dispersion strengthened magnesium alloys and improvement of current Mg-Al-RE and Mg-Al-Si systems are the potential routes to expand diecast magnesium alloys to elevated temperature applications.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. W. UNSWORTH, in SAE (Society of Automotive Engineers) Technical Paper Series, SAE, Warrendale, PA, 1988, Paper No. 880512, presented in 1988 SAE Int. Cong. Expo., Detroit, MI, USA.

    Google Scholar 

  2. Panel on trends in usage of magnesium, “Trends in Usage of Magnesium”, NRC report No. NMAB-322, U.S. Bureau of Mines, Washington, DC, 1975.

    Google Scholar 

  3. M. O. PEKGULERYUZ and M. M. AVEDESIAN,J. Jpn Light Metals Inst. 42 (1992) 679.

    Google Scholar 

  4. M. O. PEKGULERYUZ, A. LUO, P. VERMETTE and M. M. AVEDESIAN, in Proceedings of the 50th International Magnesium Association (IMA) Congress, Washington DC, May 1993, p. 20.

  5. L.-Y. WEI, PhD thesis, Chalmers University of Technology, Goteborg, Sweden (1990).

    Google Scholar 

  6. E. F. EMLEY, “Principles of magnesium technology” (Pergamon Press, London, 1966).

    Google Scholar 

  7. I. I. FILIPPOV,Liteznoje Proiswodstwo 2 (1960) S10.

    Google Scholar 

  8. G. FOERSTER, in Trans. 8th SDCE International Die Casting Cong., Detroit, MI, USA, 1975, Paper No. G-T75-112.

  9. A. J. MURPHY and R. J. M. PAYNE,J. Inst. Metals 73 (1947) 105.

    Google Scholar 

  10. ASM International Handbook Committee, “Metals handbook”, 10th Edn, Vol. 2 (ASM International, Materials Park, OH) 1990.

    Google Scholar 

  11. R. J. M. PAYNE and N. BAILEY,J. Inst. Metals 88 (1959–60) 417.

    Google Scholar 

  12. G. S. FOERSTER and J. B. CLARK, US Patent 3 419 385 (1968).

  13. L. B. DUFFY, Foundry Trade J.,165 (1991) 319.

    Google Scholar 

  14. J. E. MORGAN and B. L. MORDIKE,Metall. Trans. A 12A (1981) 1581.

    Google Scholar 

  15. W. UNSWORTH,Light Metals Age 44 (1986) 7, 9, 15.

    Google Scholar 

  16. S. L. COULING,Met. Eng. Qtly 12 (1972) 7.

    Google Scholar 

  17. G. S. FOERSTER, in Proc. Conf. 33rd International Magnesium Association (IMA) Annual Meeting, IMA, 1976, p. 35.

  18. G. FOERSTER, Trans. 7th SDCE International Die Casting Cong., 1972, Paper No 9372.

  19. G. FOERSTER,Met. Eng. Qtly 13 (1973) 19.

    Google Scholar 

  20. G. W. LORIMER, in Proc. of Magnesium Technology, Whitstable, London, 1987, p. 47.

    Google Scholar 

  21. W. UNSWORTH,Light Metals Age 45 (1987) 10.

    Google Scholar 

  22. J. E. HILLIS,Light Metals Age 41 (1983) 12.

    Google Scholar 

  23. R. IRMANN,Tech. Rundsch. 41 (1949) 19.

    Google Scholar 

  24. A. von ZEERLEDER,Z. Metallkd 41 (1950) 228.

    Google Scholar 

  25. E. A. BLOCH,Met. Rev. 6 (1961) 193.

    Google Scholar 

  26. F. V. LENEL, G. S. ANSELL and E. C. NELSON,Trans AIME 209 (1957) 117.

    Google Scholar 

  27. J. S. BENJAMIN and M. J. BOMFORD,Metall. Trans. A 8A (1977) 1301.

    Google Scholar 

  28. G. JANGG, F. KUTNER and G. KORB,Aluminum 51 (1975) 641.

    Google Scholar 

  29. G. JANGG, F. KUTNER and G. KORB,Powder Metall. Int. 9 (1977) 24.

    Google Scholar 

  30. V. ARNOLD and J. BAUMGARTEN,Powder Metall. Aerospace Mater. 1 (1984) 1.

    Google Scholar 

  31. K. KUCHEROVA, A. ORLOVA, H. OIKAWA and J. CADEK,Mater. Sci. Eng. A 102 (1988) 201.

    Google Scholar 

  32. W. C. OLIVER and W. D. NIX,Acta Metall. 30 (1982) 1335.

    Google Scholar 

  33. K. V. OLDENBURG, G. FROMMEYER, E. E. SCHMID and W. HENNING, in Proc. ASM Conference of Advanced Aluminum and Magnesium Alloys, Amsterdam, 1990.

  34. E. E. SCHMID, K. V. OLDENBURG and G. FROMMEYER,Z. fur Metallkunde 81 (1990) 809.

    Google Scholar 

  35. J. ROSLER, R. JOOS and E. ARZT,Metall. Trans. A 23A (1992) 1521.

    Google Scholar 

  36. A. LUO and M. O. PEKGULERYUZ, Unpublished work.

  37. M. O. PEKGULERYUZ and M. M. AVEDESIAN, in Proc. Magnesium Alloys and Their Applications, DGM, Germany, 1992, p. 213.

    Google Scholar 

  38. P. GREENFIELD, “Magnesium” (Mills & Boon Ltd, London 1968).

    Google Scholar 

  39. J. L. WALTER, M. R. JACKSON and C. T. SIMS (editors) “Alloying” (ASM, Materials Park, OH, 1988) p. 424.

    Google Scholar 

  40. W. K. MILLER and E. F. RYNYZ, SAE Int. Cong. & Expo., Detroit, MI, USA, 1983, Paper No. 830521.

    Google Scholar 

  41. D. J. STARTFORD, in Proc. Metallurgy of Light Alloys, London, UK, 1983, p. 132.

  42. B. L. MORDIKE and I. STULIKOVA,ibid., p. 145.

  43. N. K. SUSEELAN and M. C. MITTAL,Mater. Sci. Forum 30 (1988) 89.

    Google Scholar 

  44. T. Kr. AUNE and H. WESTENGEN, in Proc. Magnesium Alloys and Their Applications, DGM, Germany, 1992, p. 221.

    Google Scholar 

  45. T. Kr. AUNE and T. J. RUDEN, SAE Int. Cong & Exposition, Detroit, MI, USA, 1992, Paper No. 920070.

    Google Scholar 

  46. Dow Chemical Co., German Patent Application 2 235 001, opened for inspection, Feb. 8, 1973.

  47. H. I. KAPLAN,Die Casting Eng. Nov./Dec. (1986) 16.

  48. J. F. KING, G. A. FOWLER and P. LYON, in Proc. Conf. Light Weight Alloys for Aerospace Applications II (edited by E. W. Lee and N. J. Kim) (TMS, USA, 1991) p. 423.

    Google Scholar 

  49. I. J. POLMEAR, in Proc. Magnesium Alloys and Their Applications, DGM, Germany, 1992, p. 201.

    Google Scholar 

  50. L. B. DUFFY,Foundry Trade J. 165 (1991) 319.

    Google Scholar 

  51. W. S. LOOSE, “Corrosion handbook”, (edited by H. H. Uhlig) (Wiley, New York, 1948) p. 218.

    Google Scholar 

  52. C. S. ROBERTS, “Magnesium and its alloys” (Wiley, New York, 1960).

    Google Scholar 

  53. M. A. TIMONOVA, “Corrosion protection of magnesium alloys” (Mashinostroyeniye, Moscow, 1964).

    Google Scholar 

  54. H. P. GODARD, W. B. JEPSON, M. R. BOTHWELL and R. L. KANE, “The corrosion of light metals” (The Electrochemical Society, Inc., New York, 1967).

    Google Scholar 

  55. W. A. FERRANDO,J. Mater. Engng. 11 (1989) 299.

    Google Scholar 

  56. G. V. RAYNOR, “The physical metallurgy of magnesium and its alloys” (Pergamon Press, UK, 1959) p. 103.

    Google Scholar 

  57. T. J. GRAY (editor) Int. Conf. Strontium Containing Compounds, NRC, Ottawa, Canada, 1973, p. 232.

    Google Scholar 

  58. W. HENNING and B. L. MORDIKE, in Proc. Strength of Metals and Alloys, Vol. 1, Montreal, Canada, 1985, p. 803.

  59. M. E. DRITS, L. L. ROKHLIN, A. A. ORSHKINA and N. I. NIKITINA,RUSS Metall. 5 (1982) 83.

    Google Scholar 

  60. A. A. NAYEB-HASHEMI and J. B. CLARK (editors), “Phase diagrams of binary magnesium alloys” (ASM International, Materials Park, OH, 1988).

    Google Scholar 

  61. M. O. PEKGULERYUZ, A. LUO and C. ALIRAVCI, in Proc. of Int Symp. on Light Metals Processing and Applications, The Metallurgical Society of CIM, 1993, p. 409.

  62. E. C. ROLLASON, “Metallurgy for engineers”, 4th Edn (Edward Arnold, UK, 1973).

    Google Scholar 

  63. F. HOLLRIGL-ROSTA, E. JUST, J. KOHLER and H. J. MELZLER,Light Metals Age August (1980) 22.

  64. O. LUNDER, K. NISANCIOGLU and R. S. HANSEN, in SAE (Society of Automotive Engineers) Technical Paper Series, SAE, Warrendale, PA, 1988, Paper No. 930755, presented in 1993 SAE Int. Cong. Expo., Detroit, MI, USA.

    Google Scholar 

  65. O. LUNDER, J. E. LEIN, T. Kr. AUNE and K. NISANCIOGLU,Corrosion 45 (1989) 741.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institute of Magnesium Technology, Inc., G1P 4N7, Ste-Foy, Quebec, Canada

    A. Luo & M. O. Pekguleryuz

Authors
  1. A. Luo
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. M. O. Pekguleryuz
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Luo, A., Pekguleryuz, M.O. Cast magnesium alloys for elevated temperature applications. J Mater Sci 29, 5259–5271 (1994). https://doi.org/10.1007/BF01171534

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF01171534

Keywords

Search

Navigation