Skip to main content
Log in

Indirect tensile testing of anisotropic rocks

Rock mechanics Aims and scope Submit manuscript

Summary

Indirect Tensile Testing of Anisotropic Rocks

The tensile strength of rock materials is a parameter relevant to many rock mechanics applications. Rocks are often anisotropic in nature. Therefore, it is of interest to investigate suitable experimental methods for tensile testing to be used with these rocks. An attempt is made in this paper to see if the indirect methods adopted for testing isotropic rocks can be applied. Two rock types with transversely isotropic behavior are tested by loading discs and rings along their diameter. The finite element method is used in order to correlate the tensile stress, for which tensile failure is assumed to occur in each test, with the orientation of the axes of anisotropy. It is shown that the experimental results can be appropriately explained by this method and a parameter be defined which allows one to describe the law of variation of tensile strength with the anisotropy of deformability.

Zusammenfassung

Indirekte Zugfestigkeitsprüfung anisotroper Gesteine

Die Zugfestigkeit eines Gesteins stellt bei felsmechanischen Betrachtungen einen wichtigen Parameter dar. Die bisherigen Wege, diesen Parameter zu erfassen, setzen ein isotropes, homogenes Medium voraus. Da der natürliche Fels stets anisotrop und inhomogen ist, prüfen die Autoren die Möglichkeit, indirekte Zugversuche, wie sie bisher angewandt wurden, auf anisotrope Medien zu übertragen.

Die Autoren untersuchen das Verhalten von Granitgneis und Serpentinschiefer mit Transversal-Anisotropie. Die Untersuchung erfolgt im Druckversuch an Scheiben und Ringen längs des vertikalen Durchmessers, wie es für homogenes und isotropes Material im Sinne der klassischen Elastizitätstheorie üblich ist.

Durch Anwendung der Finite-Element-Methode gelingt es, die Beziehungen zwischen Bruch-Zugspannung und Abweichung der Anisotropie-Achse zu ermitteln.

Auf diesem Wege werden die experimentellen Ergebnisse erklärbar. Darüber hinaus ist es möglich, einen Parameter zu bestimmen, der es erlaubt, einen gesetzmäßigen Zusammenhang zwischen der Zugfestigkeit und dem Grad der Anisotropie des Gesteins zu ermitteln.

Résumé

Essais indirects de traction sur des roches anisotropes

La connaissance de la contrainte de traction à la rupture est un paramètre important dans le domaine de la Mécanique des Roches. Etant donné que la plupart des roches sont anisotropes, il est intéressant de développer des essais capables de donner la contrainte de rupture à la traction de ces roches. Dans ce travail on a cherché à vérifier si les essais indirects de traction utilisés depuis longtemps pour des roches isotropes sont valables aussi pour des roches anisotropes. Dans ce but on a examiné le comportement de deux types de roche à isotropie transversale en exécutant des essais de compression le long d'un diamètre sur des disques et des anneaux. La méthode des éléments finis a été appliquée dans le but de disposer d'une corrélation entre la contrainte de traction pour laquelle la rupture a lieu, avec l'orientation de l'axe d'anisotropie. On a ainsi déduit que les résultats expérimentaux peuvent être interprétés par cette méthode et qu'il est possible aussi de définir un paramètre qui permet d'en tirer une loi de variation de la résistance à la traction en fonction de l'anisotropie de la déformabilité.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Addinall, E., and P. Hackett: Tensile failure in rock-like materials. Proc. Sixth Symposium on Rock Mech., Univ. of Missouri at Rolla, Rolla, 515–538, 1964.

  2. Barron, K.: Brittle fracture initiation in and ultimate failure of rocks, Part III — Anisotropic rocks: experimental results. Int. J. Rock Mech. Min. Sci.8, 565–575 1971.

    Google Scholar 

  3. Fine, J., and G. Vouille: L'anisotropie des roches — Son influence sur l'essai brésilien. Revue de l'Industrie Minerale, 5–12, 1970.

  4. Hiramatsu, Y., and Y. Oka: Disc Test, Ring Test, Rectangular Plate Test and Irregular Specimen Test for Determining the Tensile Strength of Rocks. Proc. Second Congress of the International Society for Rock Mechanics, Belgrade, 199–206, 1970.

  5. Hobbs, D. W.: The Tensile Strength of Rocks. Int. J. Rock Mech. Min. Sci.1 385–396, 1964.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Additional information

With 16 Figures

Rights and permissions

Reprints and permissions

About this article

Cite this article

Barla, G., Innaurato, N. Indirect tensile testing of anisotropic rocks. Rock Mechanics 5, 215–230 (1973). https://doi.org/10.1007/BF01301795

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF01301795

Keywords

Navigation