Summary
The morphology and structure of gels produced by quenching semidilute solutions of high molecular weight polyethylene\((\bar M_w = 1.5 - 3.5 \cdot 10^6 )\) in decalin is discussed. The drawing behavior of the dried gel films at room temperature and at 130 °C and the structural features of films drawn to ratios as high as 130 were examined with various microscopic techniques and wide-angle X-ray scattering.
Zusammenfassung
Morphologie und Struktur von Gelen, hergestellt durch Abschreckung halbverdünnter Lösungen von Polyethylen mit hohem Mol-Gewicht\((\bar M_w = 1,5 - 3,5 \cdot 10^6 )\) in Decalin werden besprochen. Das Streckverhalten bei Raumtemperatur und bei 130 °C der trockenen Gelfilme und die Struktur-Eigenschaften von im Verhältnis bis 130:1 gestreckten Filme wurden unter Verwendung verschiedener Mikroskop-Techniken und der Weitwinkelstreuung von Röntgenstrahlen geprüft.
Similar content being viewed by others
References
Smith, P., P. J. Lemstra, J. Mater. Sci.15, 505 (1980);b Makromol. Chem180, 2983 (1979);c Polymer21, 1341 (1980);d J. Polym. Sci. Phys. Ed.19, 1007 (l981).
Smith, P., P. J. Lemstra, Colloid & Polym. Sci.258, 891 (1980);b P. Smith, P. J. Lemstra, H. C. Booij, J. Polym. Sci., Phys. Ed.19, 877 (1981).
Barham, P. J., M. J. Hill, A. Keller, Colloid & Polym. Sci.258, 899 (1980).
Takahashi, A., M. Sakai, T. Kato, Polym. J.5, 335 (1980).
Zwijnenburg, A., A. J. Pennings, Colloid & Polym. Sci.254, 868 (1976).
Lemstra, P. J., P. Smith, Br. Polym. J.12, 212 (1980).
Graessley, W. W., Adv. Polym. Sci.16, 58 (1974).
Kiho, H., A. Peterlin, P. H. Geil, J. Appl. Phys.35, 294 (1964).
Statton, W. O., J. Appl. Phys.38, 4149 (1967).
Ishikawa, K., K. Miyasaka, M. Maeda, J. Polym. Sci.-A27, 2029 (1969).
Ohde, Y., H. Miyaji, K. Asai, Jap. J. Appl. Phys.10, 171 (1971).
Wunderlich, B., “Macromolecular Physics”, Vol. 1, p. 232, Academic Press (New York, 1973).
Keith, H. D., F. J. Padden, R. G. Vadimsky, J. Appl. Phys.42, 4585 (1971).
Jurgeleit, W. (to Vereinigte Glanzstoff-Fabriken), U. S. Patent 3,048,467 (1962).
Bohn, C., referred to by J. R. Schaefgen in “UltraHigh Modulus Polymers” Eds. A. Ciferri, I. M. Ward, Applied Science Publishers, p. 199 (London 1979).
Zwick, M. M., Appl. Polym. Symp.6, 109 (1967).
Rehage, G., Colloid & Polym. Sci.57, 7 (1975).
Barham, P. J., A. Keller, private communication.
Smook, J., M. Flinterman, A. J. Pennings, Polym. Bull.2, 775 (1980).
Capaccio, G., I. M. Ward, Polymer15, 223 (1974).
Peterlin, A., J. Mater. Sci.6, 490 (1971).
“Ultra-High Modulus Polymers”, Eds. A. Ciferri, I. M. Ward, Applied Science Publ. (London 1979); Capaccio, G., A. G. Gibson, I. M. Ward, p. 1; A. E. Zachariades, W. T. Mead, R. S. Porter, p. 77; A. Peterlin, p. 279; A. Keller, p. 321.
Prime, R. B., B. Wunderlich, J. Polym. Sci.-A27, 2061 (1969).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Smith, P., Lemstra, P.J., Pijpers, J.P.L. et al. Ultra-drawing of high molecular weight polyethylene cast from solution. Colloid & Polymer Sci 259, 1070–1080 (1981). https://doi.org/10.1007/BF01524892
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01524892