Abstract
The traditional concept of the relationship between metal content and grain size assumes that the fine fraction carries most of the metals in natural sediments. This concept is supported in many cases by strong, significant linear relationships between total-sediment metal concentrations and percentages of various fine-size fractions. Such observations have led to development of methods to correct for the effects of grain size in order to accurately document geographical and temporal variations and identify trends in metal concentrations away from a particular source. Samples from the floodplain sediment of a large, coarse-grained river system indicates that these concepts do not hold for sediments contaminated by mining and milling wastes. In this particular system, the application of methods to correct for grain-size effects would lead to erroneous conclusions about trends of metals in the drainage. This indicates that the a priori application of grain-size correction factors limits interpretation of actual metal distributions and should not be used unless data indicate that correlations exist between metals and particular size fractions.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References Cited
Ackermann, F., 1980, A procedure for correcting the grain size effect in heavy metal analyses of estuarine and coastal sediments: Environmental Technology Letters, v. 1, p. 518–527.
Chao, T. T., and P. K. Theobold Jr., 1976, The significance of secondary iron and manganese oxides in geochemical exploration: Economic Geology, v. 71, p. 1560–1569.
Chester, R. and M. Hughes, 1967, A chemical technique for the separation of ferro-manganese minerals, carbonate minerals, and adsorbed trace elements from pelagic sediments: Chemical Geology, v. 2, p. 249–262.
de Groot, A. J., J. J. M. de Goeij, and C. Zegers, 1971, Contents and behavior of mercury as compared with other heavy metals in sediments from the rivers Rhine and Ems: Geologie en Mijnbouw, v. 50, no. 3, p. 393–398.
de Groot, A. J., K. H. Zschuppe, and W. Salomons, 1982, Standardization of methods of analysis for heavy metals in sediments: Hydrobiologia, v. 92, p. 689–695.
Filipek, L., and D. Owen, 1979, Geochemical associations and grain size partitioning of heavy metals in lacustrine sediments: Chemical Geology, v. 26, p. 105–117.
Forstner, U., 1982, Cumulative phases for heavy metals in limnic systems: Hydrobiologia, v. 91, p. 299–313.
Forstner, U., and W. Salomons, 1980, Trace metal analysis on polluted sediments, part I: assessment of sources and intensities: Environmental Technology Letters, v. 1, p. 494–506.
Forstner, U., and G. Wittman, 1979, Metal pollution in the aquatic environment: New York, Springer-Verlag, 486 p.
Gibbs, R. J., 1977, Transport phases of transition metals in the Amazon and Yukon rivers: GSA Bulletin, v. 88, p. 829–843.
Helmke, P. A., R. D. Koons, P. J., Schombers, and I. K. Iskandar, 1977, Determination of trace element contamination of sediments by multielement analysis of clay-size fraction: Environmental Science and Technology, v. 11, no. 10, p. 984–989.
Jenne, E. A., 1968, Controls on Mn, Fe, Co, Ni, Cu, and Zn concentrations in soils and water: the significance of hydrous Mn- and Fe-oxides: American Chemistry Society Advances in Chemistry Series, v. 73, p. 337–387.
Jenne, E. A., V. C. Kennedy, J. M. Burchard, and J. W. Ball, 1980, Sediment collection and processing for selective extraction and for total trace element analysis.In Baker, R. A., ed., Contaminants and Sediments: Ann Arbor, Michigan, Ann Arbor Science Publishers, v. 2, p. 169–191.
Johns, C., and J. Moore, 1986, Metals in bottom sediments of lower Clark Fork River reservoirs: Final Report to the Montana Water Resources Research Center, Bozeman. MT.
Meyer, C., E. Shea and C. Goddard, 1968, Ore deposits at Butte, Montana.In Ore deposits of the United States, 1933–1967: American Institute of Mining, Metallurgy, and Petroleum Engineering, v. 2., p. 1373–1416.
Miller, R., 1973, Production history of the Butte district and geological function, past and present: Society of Economic Geologists Guidebook for the Butte field meetings, p. F1–F11.
Moore, J., 1985, Source of metal contamination in Milltown Reservoir, Montana: an interpretation based on Clark Fork River bank sediment: Unpublished report to the U.S. Environmental Protection Agency, Helena, MT, Sept., 1985.
Oliver, B., 1973, Heavy metals in Ottawa and Rideau River sediments: Environmental Science and Technology, v. 7, p. 135–137.
Phillips, G. R., 1985, Relationships among fish populations, metals concentrations, and stream discharge in the upper Clark Fork River.In Carlson, C. E. and L. L. Bahls, eds., Proceedings-Clark Fork Symposium, Montana Academy of Sciences, Montana College of Mineral Science and Technology, Butte, MT, April 19, 1985, p. 57–73.
Ray, G. J., 1986, Effects of heavy metal pollution on a riparian plant community in the upper Clark Fork River basin: unpublished M.A. thesis, University of Montana.
Rice, P., and G. Ray, 1984, Floral and faunal survey and toxic metal contamination of the Grant-Kohrs Ranch National Historic Site: Final Report, National Park Service Research Center, Laramie, WY, May, 1984.
Rice, P., and G. Ray, 1985, Heavy metals in floodplain deposits along the upper Clark Fork River,in Carlson, C. E. and L. L. Bahls, eds., Proceedings-Clark Fork Symposium, Montana Academy of Sciences, Montana College of Mineral Science and Technology, Butte, MT, April 19, 1985, pp. 26–45.
Salomons, W., and U. Forstner, 1984, Metals in the hydrocycle: New York, Springer-Verlag, 349 p.
Sokal. R., and F. Rohlf, 1981, Biometry: New York, Freeman and Co., 859 p.
SPSS Inc., 1983, SPSS®, a statistical package for the social sciences: Chicago, IL, SPSS Inc.
SPSS Inc., 1984, SPSS/PC for the IBM PC/XT: Chicago, IL, SPSS Inc.
Tessier, A., P. G. C. Campbell, and M. Bisson, 1982, Particulate trace metal speciation in stream sediments and relationships with grain size: implications for geochemical exploration: Journal of Geochemical Exploration, v. 16, p. 77–104.
Tetra Tech, 1986, Anaconda smelter RI/FS Geochemistry Report: Unpublished report to the Anaconda Mineral Company, TC 3296-01, Tetra Tech Inc., Bellevue, WA.
Thorne, L. T., and G. Nickless, 1981, The relationship between heavy metals and particle size fractions within the Severn Estuary (U.K.) inter-tidal sediments: The Science of the Total Environment, v. 19, p. 207–213.
Wilber, W. G., and J. V. Hunter, 1979, The impact of urbanization on the distribution of heavy metals in bottom sediments of the saddle river: Water Resources Bulletin, v. 15, no. 3, p. 790–800.
Whitney, P. R., 1975, Relationship of manganese-iron oxides and associated heavy metals to grain size in stream sediments: Journal of Geochemical Exploration, v. 4, p. 251–263.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Moore, J.N., Brook, E.J. & Johns, C. Grain size partitioning of metals in contaminated, coarse-grained river floodplain sediment: Clark Fork River, Montana, U.S.A.. Environ. Geol. Water Sci 14, 107–115 (1989). https://doi.org/10.1007/BF01728502
Issue Date:
DOI: https://doi.org/10.1007/BF01728502