Skip to main content
SpringerLink
Log in

A review: Acoustic emission, a tool for composite-materials studies

  • Published:
Experimental Mechanics Aims and scope Submit manuscript

Abstract

The technique of acoustic emission has two broad applications areas. The first is nondestructive evaluation. The second is as a tool in studies or research which are not fundamentally directed towards acoustic emission. It is this second application with which we are concerned here. Acoustic emission is a very useful tool in this role because of its high sensitivity, real-time capability, volume-monitoring approach, and sensitivity to any process or mechanism which generates sound waves. This paper presents a comprehensive review of areas where acoustic emission (AE) has been used for materials studies on composite materials. The following fields, among others, will be covered: (1) time-dependent composite properties, (2) impact studies, (3) correlation of AE with stress level, (4) application to matrix cure studies, (5) relationship of AE-detected damage to other measures of damage, (6) studies of the effects of matrix material, (7) application to differences in second phase, (8) interface studies, (9) AE and dimensional stability, (10) AE applied to orientation studies, and (11) environmental effects. This review will emphasize the roles that AE can play as a tool for the materials scientist: (1) discovery of damage mechanisms, (2) characterization of damage progression with increasing time or stress, (3) optimization of fabrication variables, and (4) reduction in the numbers of test specimens required in various studies.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Drouillard, T.F. andHamstad, M.A., “A Comprehensive Guide to the Literature on Acoustic Emission From Composites,”1st Int. Symp. Acoustic Emission From Reinforced Plastics, SPI, Inc., New York, 1–60 (1983).

    Google Scholar 

  2. Summerscales, J. and Short, D., “An Author Index to the World Literature on Acoustic Emission in Fiber Reinforced Composite Materials,” Plymouth Comp. Mat. Res. Group, Plymouth, England, Rep. No. PCMRG-BIB-008 (July 1984).

  3. Rotem, A. and Baruch, J., “Determining the Load-Time History of Fibre Composite Materials by Acoustic Emission,” Israel Inst. of Tech., Haifa, Israel, MED Rep. No. 44 (NTIS: AD-780-122), (March 1974). (See also J. Mat. Sci., JMTSA,9 [11], 1789–1796 [Nov. 1974].)

  4. Rotem, A., “Effect of Strain Rate on Acoustic Emission from Fibre Composites,”Composites, CPSOA,9 (1),33–36 (Jan. 1978).

    Google Scholar 

  5. Ryder, J.T. and Wadin, J.R., “Acoustic Emission Monitoring of a Quasi-Isotropic Graphite/Epoxy Laminate Under Fatigue Loading,” Paper Summaries: ASNT Nat. Spring Conf., April 2–5, 1979, San Diego, Ca 9–22, ASNT, Columbus, OH (1979). (See also Advanced Composites — Special Topics, papers presented at Conf. Advanced Composites-Special Topics, El Segundo, CA, 246–266 [Dec. 4–6, 1979].)

  6. Eisenblatter, J., Jax, P. and Schwalbe, H.J., “A Survey of Acoustic Emission Research in Europe and Investigations Conducted at Battelle-Frankfort,” Battelle-Institut eV, Frankfort am Main, Germany (1974). Paper presented at 2nd Acoustic Emission Symp., Tokyo, Japan, Sep. 2–4, 1974.

  7. Fuwa, M., Harris, B. andBunsell, A.R., “Acoustic Emission during Cyclic Loading of Carbon-Fibre-Reinforced Plastics,”J. Phys. D: Appl. Phys., JPAPB,8 (13),1460–1471 (Sept. 11,1975).

    Google Scholar 

  8. Laroche, D. andBunsell, A.R., “Stress and Time Dependent Damage in Carbon Fibre Reinforced Plastics,”Advances in Composite Materials, ed. A.R. Bunsell, C. Bathias, A. Martrenchar, D. Menkes, andG. Verchery, Pergamon Press, Oxford, England and Elmsford, NY,2 985–997 (1980).(See also Proc. 3rd Int. Conf. on Comp. Mat. [ICCM 3], Paris, France, Aug. 26–29, 1980. [ISBN 0-08-026717-3].)

    Google Scholar 

  9. Lark, R.F. andMoorhead, P.E., “Acoustic Emission Testing of Composite Vessels under Sustained Loading,”NASA TM-78981, NASA, Lewis Res. Ctr., Cleveland, OH (NTIS: n78-33150), (Oct.1978).

    Google Scholar 

  10. Ochiai, S.I., Lew, K.Q. andGreen, J.E., “Instrumented Impact Testing of Structural Fiber-Reinforced Plastic Sheet Materials and the Simultaneous AE Measurements,”J. Acoustic Emission,1 (3),191–192 (July1982).

    Google Scholar 

  11. Bailey, C.D., Freeman, S.M. andHamilton, J.M., “Detection and Evaluation of Impact Damage in Graphite/Epoxy Composites,”Materials & Processes-In Service Performance, Nat SAMPE Tech. Conf. Series, SAMPE, Azusa, CA,9,491–503 (1977).Conference held in Atlanta, GA, Oct. 4–6, 1977.

    Google Scholar 

  12. De Charentenay, F.X. andBenzeggagh, M., “Fracture Mechanics of Mode 1 Delamination in Composite Materials,”Advances in Composite Materials, ed. A.R. Bunsell, C. Bathias, A. Martrenchar, D. Menkes, andG. Verchery, Pergamon Press, Oxford, England and Elmsford, NY,1,186–197 (1980).(See also Proc. 3rd Int. Conf. Comp. Mat. [ICCM 3], Paris, France, Aug. 26–29, 1980 [ISBN 0-08-026717-3].)

    Google Scholar 

  13. De Charentenay, F.X., Bethmont, M., Benzeggagh, M. andChretien, J.F., “Delamination of Glass Fiber Reinforced Polyester, and Acoustic Emission Study,”Mechanical Behaviour of Materials, ed. K.J. Miller andR.F. Smith, Pergamon Press, Oxford, England and Elmsford, NY,3,241–251 (1980).(See also Proc. 3rd Int. Conf. Mech. Behaviour of Mat. [ICM-3], Cambridge, England, Aug. 20–24, 1979. [ISBN 0-08-024739-3].)

    Google Scholar 

  14. Old, C.F. andCharlesworth, J.P., “The Breaking Strain of Nb 3Sn in a Multifilamentary Superconductor,”Cryogenics, CRYOA,16 (8),469–471 (Aug.1976).

    Google Scholar 

  15. Fuwa, M., Bunsell, A.R. andHarris, B., “Tensile Failure Mechanisms in Carbon Fibre Reinforced Plastics,”J. Mat. Sci. JMTSA,10 (12),2062–2070 (Dec.1975).

    Google Scholar 

  16. Takehana, M. and Kimpara, I., “Internal Fracture and Acoustic Emission of Fiberglass Reinforced Plastics,” Mechanical Behavior of Materials, Vol. V: Composites, Testing and Evaluation, Soc. Mat. Sci., Kyoto, Japan, 156–167 (1972). (See also Proc. Int. Conf. Mech. Behaviour of Mat., Kyoto, Japan, Aug. 15–20, 1971.)

  17. Henneke, II, E.G. andHerakovich, C.T., “Acoustic Emission Investigation of Composite Reinforced Metals,”Virginia Polytechnic Inst. and State Univ., Dept. of Eng. Sci. and Mech., Blacksburg, VA, VPI-E-73-27 (Aug.1973).

    Google Scholar 

  18. Kimpara, I., Takehana, M. and Hamamoto, A., “Analysis of Internal Failure Mechanism of Woven Roving Composites,” Proc. 2nd Int. Conf. Mech. Behavior of Mat. (ICM-II), ASM, Metals Park, OH, 1340–1344 (1976).

  19. Lloyd, D.J. andTangri, K., “Acoustic Emission from Al 2O3−Mo Fibre Composites,”J. Mat. Sci., JMTSA,9 (3),482–486 (March1974).(See also Proc. Brit. Cer. Soc., PBRCA [25], 169–178 [1975].)

    Google Scholar 

  20. Mazzio, V.F., Mehan, R.L. andMullin, J.F., “Basic Failure Mechanisms in Advanced Composites,”General Electric Co., Space Sciences Lab., Philadelphia, PA, NASA CR-134525 (June 3,1973).

    Google Scholar 

  21. Harris, B., Guild, F.J. andBrown, C.R., “Accumulation of Damage in GRP Laminates,”J. Phys. D: Appl. Phys., JPAPB,12 (8),1385–1407 (Aug. 14,1979).

    Google Scholar 

  22. Swindlehurst, W.E., “Acoustic Emission from Brittle Solids,” Materialnyt (special number, “Akustisk emission”), MTRYD (2),55–62 (1978).

    Google Scholar 

  23. Swanson, G.D. andHancock, J.R., “Effects of Interfaces on the Off-Axis and Transverse Tensile Properties of Boron-Reinforced Aluminum Alloys,”Tech. Rep. No. 2 to Office of Naval Res., Contract No. N00014-70-C-0212, NR 031-743, Midwest Res. Inst., Kansas City, MO (NTIS: AD-722-020), (April1971).

    Google Scholar 

  24. Grandemange, J.M. and Street, K.N., “The Effect of Notch Root Radius and Thickness on the Static Fracture Toughness of B-Al Composites,” Proc. 1975 Int. Conf. Comp. Mat., ed. E. Scala, E. Anderson, I. Toth, and B.R. Noton, Met. Soc. of AIME, New York,2,1019–1059 (1976). (Conference cosponsored by SAMPE, SPI, SPE, Inst. Electrical and Electronics Eng., Amer. Inst. Aero. and Astro., and ASM, held in Geneva, Switzerland, April 7–11, 1975 and in Boston, MA, April 14–18, 1975.)

  25. Hutton, P.H., “Investigate Feasibility of Utilizing Acoustic Emission Methods to Evaluate the Integrity of a Prototype ADAPTS Oil Storage Container,” Battelle-Northwest, Richland, WA, Rep. No. CG-D-37-76 (NTIS: AD/A-025-910), (Dec. 1975).

  26. Sins, G.D., Dean, G.D., Read, B.E. andWestern, B.C., “Assessment of Damage in GRP Laminates by Stress Wave Emission and Dynamic Mechanical Measurements,”J. Mat. Sci., JMTSA,12 (11),2329–2342 (1977).

    Google Scholar 

  27. Williams, R.S. andReifsnider, K.L., “Real-Time Non-destructive Evaluation of Composite Materials during Fatigue Loading,”Mat. Eval., MAEVA,35 (8),50–54 (Aug.1977).

    Google Scholar 

  28. Phillips, M.G. andHarris, B., “Acoustic Emission Study of the Development of Damage in GRP and GRP Structures,”Advances in Composite Materials, ed. A.R. Bunsell, C. Bethias, A. Martrenchar, D. Menkes, andG. Verchery, Pergamon Press, Oxford, England and Elmsford, NY,2,998–1014 (1980).(See also Proc. 3rd Int. Conf. Comp. Mat. [ICCM 3], Paris, France, Aug. 26–29, 1980 [ISBN 0-08-026717-3].)

    Google Scholar 

  29. Hinton, Y.L., Shuford, R.J. andHoughton, W.W., “Acoustic Emission during Cure of Fiber Reinforced Composites,”Characterization of Composite Materials, Army Mat. and Mech. Res. Ctr., Watertown, MA, AMMRC MS 82-3, 25–36 (May1982).

    Google Scholar 

  30. Houghton, W.W., Shuford, R.J. andSprouse, J.F., “Acoustic Emission as an Aid for Investigating Composite Manufacturing Processes,”New Horizons-Materials and Processes for the Eighties, Nat. SAMPE Tech. Conf. Series, SAMPE, Azusa, CA,11,131–150 (1979).

    Google Scholar 

  31. McGarry, F.J., Rowe, E.H. andRiew, C.K., “Improving the Crack Resistance of BMC and SMC,”32nd Annual Conf., Reinforced Plastics-Comp. Inst.: Discover Reinforced Plastics, SPI, Inc., New York, Sec. 16-C, 1–11 (1977).

    Google Scholar 

  32. Hamstad, M.A. andChiao, T.T., “Acoustic Emission Produced during Burst Tests of Filament-Wound Bottles,”Lawrence Livermore Nat. Lab., Livermore, CA;UCRL-74528 (March 29, 1973). (See also J. Comp. Mat., JCOMB,7 [3],320–332 [July1973].

    Google Scholar 

  33. Hamstad, M.A., “Local Characterization of Fiber Composites by Acoustic Emission,”Lawrence Livermore Nat. Lab., Livermore, CA, UCRL-85793 (NTIS), available in microfiche only (March 23,1981). (Paper was presented at Office of Nav. Res., Eastern/Central Reg. Conf. “A Critical Review: Techniques for the Characterization of Composite Materials,” Cambridge, MA, June 3–10, 1981.)

    Google Scholar 

  34. Norwood, L.S. andMillman, A.E., “Strain Limited Design Criteria for Reinforced Plastic Process Equipment,”34th Annual Conf., Reinforced Plastics/Comp. Inst.: Reinforcing the Future, SPI, Inc., New York, Sec. 3-D, 1–7 (1979).

    Google Scholar 

  35. Hamstad, M.A. andChiao, T.T., “Acoustic Emission from Stress Rupture and Fatigue on an Organic Fiber Composite,”Lawrence Livermore Nat. Lab., Livermore, CA, UCRL-74745 (NTIS), (Jan. 15,1974). (See also Composite Reliability, ASTM, Philadelphia, PA, ASTM STP 580, 191–201 [1975].)

    Google Scholar 

  36. Hamstad, M.A. andChiao, T.T., “Structural Integrity of Fiber-Epoxy Vessels by Acoustic Emission: Some Experimental Considerations,”Lawrence Livermore Nat. Lab., Livermore, CA UCRL-78198 (NTIS), (May 21,1976). (See also “Structural Integrity of Fiber-Epoxy Vessels by Acoustic Emission,” SAMQA,8 [1], 31–45 [Oct. 1976].)

    Google Scholar 

  37. Holt, J. andWorthington, P.J., “A Comparison of Fatigue Damage Detection in Carbon and Glass Fibre/Epoxy Composite Materials by Acoustic Emission,”Advances in Composite Materials, ed., A.R. Bunsell, C. Bathias, A. Martrenchar, D. Menkes, andG. Verchery, Pergamon Press, Oxford, England and Elmsford, NY,2,1040–1049 (1980). (See also Proc. 3rd Int. Conf. on Comp. Mat. [ICCM 3], Paris France, Aug. 26–29, 1980 [ISBN 0-08-026717-3]. and Int. J. Fatigue, IJFAD,3 [1], 31–35 [Jan. 1981].)

    Google Scholar 

  38. Fuwa, M., Bunsell, A.R. andHarris, B., “Acoustic Emission Studies of Filament-Wound Carbon Fibre Reinforced Rings and Pressure Vessels,”J. Strain Anal., JSTAB,11 (2),97–101 (April1976).

    Google Scholar 

  39. Grenis, A.F. andLevitt, A.P., “Acoustic Emission of Graphite and Boron Fiber-Reinforced Aluminum Composites during Deformation and Fracture,”Army Mat. and Mech. Res. Ctr., Watertown, MA, AMMRCTR-75-15 (NTIS: AD/A-014-937), (June1975).

    Google Scholar 

  40. Crump, T.N. andDroge, M.A., “The Characterization of Fiberglass Reinforced Plastics Using Acoustic Emission,”Managing Corrosion With Plastics, ed. T.L. Anderson, Nar. Assoc. Corrosion Eng., Houston, TX,IV,91–95 (1979).

    Google Scholar 

  41. Bunsell, A.R., Fuwa, M. andHarris, B., “Evaluation Studies of Acoustic Emission,”Newsletter on the Non-Destr. Test. of Comp. Mat. and Adhesive Bonded Joints,”Roy. Aircraft Estab., Farnborough, Hants, England, (3),7–1 to7-7 (June1974).

    Google Scholar 

  42. Arrington, M. andHarris, B., “Some Properties of Mixed Fibre CFRP,”Composites, CPSOA,9,149–152 (July1978).

    Google Scholar 

  43. Rothwell, R. andArrington, M., “Acoustic Emission and Micromechanical Debond Testing,”Nature Physical Science, NPSCA,233 (43),163–164 (Oct. 25,1971).

    Google Scholar 

  44. Corte, H., Kallmes, O. andJarrot, D., “Mechanical Failure of Ideal 2-D Fibre Networks,”Paper-Maker and Brit. Paper Trad. J., PMBPA,142 (1),61–68,72 (July1961).

    Google Scholar 

  45. Buhmann, K.P., “Beitrag zur zerstorungsfreien Prufung ester irreversibler Vorgange in glasfaserverstarkten Kunststoffen (Contribution to the Nondestructive Testing of First Irreversible Processes in Glass-Fibre-Reinforced Plastics),”Doktor-Ingenieur Thesis, Tech. Univ. Hannover, Federal Republic of Germany (in German), UCRL-Trans-11287 (1975).Translated for Lawrence Livermore Nat. Lab., Livermore, CA, Oct. 1977 (NTIS).

    Google Scholar 

  46. Fowler, T.J., “Acoustic Emission Testing of Fiber Reinforced Plastics,”ASCE, New York, Preprint 3092 (1977).Copy of preprint available from Dunegan/Endevco, San Juan Capistrano, CA, Tech. Rep. De 77-7. (See also Proc. Paper 15021, J. Tech. Councils, ASCE,105 (TC2), 281–289 [Dec. 1979].)

    Google Scholar 

  47. DeLacy, T.J. andDharan, C.K.H., “Characterization of Stability Mechanisms in Advance Composites,”Review of Progress in Quantitative Nondestructive Evaluation, ed. D.O. Thompson andD.E. Chimenti, Plenum Press, New York,1,301–306 (1982). (See also Proc. 8th Air Force/Defense Advanced Res. Projects Agency Symp. Quantitative Nondestr. Eval., Univ. of Colorado, Boulder, CO, Aug. 2–7, 1981 [ISBN 0-306-41024-9].)

    Google Scholar 

  48. Eselum, S.A., Neubert, H.D. andWolff, E.G., “Microcracking Effects on Dimensional Stability,”The Enigma of the Eighties: Evvironment, Economics, Energy, The Sci. of Adv. Mat. and Process Eng. Series, SAMPE, Azusa, CA,24,1299–1309 (1979). (See also Proc. 24th Nat. SAMPE Symp., San Francisco, CA, May 8–10, 1979.)

    Google Scholar 

  49. Niesse, J.E., “Acoustic Emission of Degraded Fiberglass Reinforced Plastics,”Monsanto Co., St. Louis, MO (Dec.1979). (Paper was presented at SPI/Committee on Acoustic Emission from Reinforced Plastics [CARP] Mtg., Houston, TX, Jan. 15–16, 1980. Copy of paper available from SPI, 355 Lexington Ave., New York, NY 10017.)

    Google Scholar 

  50. Graham, L.J., “Characterization of Acoustic Emission Signals and the Application to Composite Structures Monitoring,”Rockwell International, Science Ctr., Thousand Oaks, CA (July 15,1977).

    Google Scholar 

  51. Johnson, A.E. andJackson, J.R., “RRIM for Automotive Bodywork-An Evaluation of Its Dynamic Performance in Comparison with Metals and SMC,”Preprints 37th Annual Conf. Reinforced Plastics/Comp. Inst.: Leading from Strength, SPI, Inc., New York, 1–90 (1982).

    Google Scholar 

  52. Fowler, T.J. andGray, E., “Development of an Acoustic Emission Test for FRP Equipment,”ASCE, New York, Preprint 3583 (1979).

    Google Scholar 

  53. Hamstad, M.A., “Acoustic Emission from Filament-Wound Pressure Bottles,”Lawrence Livermore Laboratory, Livermore, CA, UCRL-73763, (NTIS), (May 5,1972). (See also Non-Metallic Materials: Selection, Processing and Environmental Behavior, Nat. SAMPE Tech. Conf. Series, SAMPE, Azusa, CA,4,321–331 [1972].)

    Google Scholar 

  54. De Charentenay, F.X., Kamimura, K. andLemascon, A., “Fatigue Delamination in CFRP Composites: Study with Acoustic Emission and Ultrasonic Testing,”Mechanics of Nondestructive Testing, ed. W.W. Stinchcomb, Plenum Press, NY, 391–402 (1980). (See also Proc. Conf. Mech. of Nondestr. Test., Virginia Polytechnic Inst. and State Univ., Blacksburg, VA, Sept. 10–12, 1980 [ISBN 0-306-40567-9].)

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Engineering, University of Denver, 80208, Denver, CO

    Marvin A. Hamstad (SEM Member) is Professor of Mechanical Engineering)

Authors
  1. Marvin A. Hamstad
    View author publications

    You can also search for this author in PubMed Google Scholar

Rights and permissions

Reprints and permissions

About this article

Cite this article

Hamstad, M.A. A review: Acoustic emission, a tool for composite-materials studies. Experimental Mechanics 26, 7–13 (1986). https://doi.org/10.1007/BF02319949

Download citation

  • Received:

  • Revised:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02319949

Keywords

Search

Navigation