Skip to main content
SpringerLink
Log in

Synthesis, properties and applications of titanium aluminides

  • Review
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Attractive elevated-temperature properties and low density make the titanium aluminides very interesting for both engine and airframe applications, particularly in the aerospace industry. The challenge to the materials scientist is to maintain these characteristics while building-in “forgiveness”. The basic phase diagram and crystal structure of both the Ti3Al and TiAl phases are reviewed, followed by a consideration of chemistry-processing-microstructure-deformation/fracture-mechanical property relationships in monolithic material. Conventional and innovative synthesis methods are presented, including use of hydrogen as a temporary alloying element. Composite concepts as a method to enhance not only “forgiveness” but also elevated-temperature behaviour are discussed. Environmental effects are evaluated prior to consideration of present and projected applications of both monolithic and composite material. It is concluded that while the titanium aluminides in monolithic form can be used now in non-demanding applications, much further research and development is required before this material class can be used in critical applications, especially in composite concepts.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Congress of the US, Office of Technology Assessment, “Advanced Materials by Design” (June 1988).

  2. A. R. C. Westwood,Met. Trans. B. 19B (1988) 155.

    CAS  Google Scholar 

  3. F. H. Froes, in “P/M in Aerospace and Defense Technologies”, edited by F. H. Froes (MPIF, Princeton, New Jersey, 1990) p. 23.

    Google Scholar 

  4. F. H. Froes, in Proceedings of ASM International sponsored meeting “Powder Metallurgy — Key to Advanced Materials Technology”, Vancouver, July/August 1990, in press.

  5. Sci. Amer. 255(4) (1986).

  6. F. H. Froes, in Proceedings of 4th Israel Materials Engineering Conference, edited by D. Itzhak and D. Eliezer (Weizmann Science Press of Israel, Jerusalem, 1989) pp. 1–41.

    Google Scholar 

  7. Idem, Mater. Design 10(3) (1989) 110.

    Article  CAS  Google Scholar 

  8. Idem, Swiss Mater. 2(2) (1990) 23.

    Google Scholar 

  9. Idem, Mater. Edge 5 (1988) 19.

    Google Scholar 

  10. Idem, in “Advanced Materials — Outlook and Information Requirements”, edited by L. J. Sousa and C. A. Sorrell (US BOM, Washington, DC, 1990) p. 41.

    Google Scholar 

  11. F. H. Froes, C. Suryanarayana andP. H. Shingu, University of Idaho/Kyoto University, work in progress (1989–91).

  12. F. H. Froes,Mater. Edge 6 (May/June 1989) 17.

    Google Scholar 

  13. F. H. Froes andC. Suryanarayana, in Proceedings of Workshop on Advanced Materials, Minsk, USSR, May/June 1989, in press.

  14. F. H. Froes, in “Space Age Metals Technology”, edited by F. H. Froes and R. A. Cull (SAMPE, Covina, California, 1988) p. 1.

    Google Scholar 

  15. F. H. Froes andY. W. Kim, in Proceedings of International Conference on Advanced Materials, Milan, May 1989, in press.

  16. C. Suryanarayana andF. H. Froes,Light Metal Age 47 (5/6) (1989) 18.

    CAS  Google Scholar 

  17. F. H. Froes andJ. Wadsworth, in Proceedings of BNF 7th International Conference, Oxford, UK, June 1989, in press.

  18. R. W. Cahn,Metals, Mater. Processes 1 (1989) 1.

    CAS  Google Scholar 

  19. D. L. Anton, D. M. Shah, D. N. Duhl andA. F. Giamei,JOM 41(9) (1989) 12.

    CAS  Google Scholar 

  20. R. L. Fleischer, D. M. Dimiduk andH. A. Lipsitt,Ann. Rev. Mater. Sci. 19 (1989) 231.

    Article  CAS  Google Scholar 

  21. R. L. Fleischer andA. I. Taub,JOM 41(9) (1989) 8.

    CAS  Google Scholar 

  22. N. S. Stoloff andR. G. Davies,Progr. Mater. Sci. 13 (1966) 1.

    Article  Google Scholar 

  23. J. H. Westbrook (ed.), “Mechanical Properties of Intermetallic Compounds” (Wiley, New York, 1960).

    Google Scholar 

  24. Idem (ed.), “Intermetallic Compounds” (Wiley, New York, 1967).

    Google Scholar 

  25. B. H. Kear, C. T. Sims, N. S. Stoloff andJ. H. Estbrook (eds), “Ordered Alloys — Structural Applications and Physical Metallurgy” (Claitor, Baton Rouge, Louisiana, 1970).

    Google Scholar 

  26. F. H. Froes, D. Eylon andH. B. Bomberger (eds), “Titanium Technology: Present Status and Future Trends” (Titanium Development Association, Dayton, Ohio, 1985).

    Google Scholar 

  27. H. A. Lipsitt, in “High Temperature Ordered Intermetallic Alloys”, series Vol. 39, edited by C. C. Koch, C. T. Liu and N. S. Stoloff (MRS, Pittsburgh, 1985) p. 351.

    Google Scholar 

  28. M. J. Blackburn andM. P. Smith, Technical Report AFWAL-TR-80-4175 (WPAFB, Ohio, 1980).

    Google Scholar 

  29. Idem, Technical Report AFWAL-TR-82-4086 (WPAFB, Ohio, 1982).

    Google Scholar 

  30. Y-W. Kim,JOM 41(7) (1989) 24.

    CAS  Google Scholar 

  31. Y-W. Kim andF. H. Froes, in “High Temperature Aluminides and Intermetallics”, edited by S. H. Whang, C. T. Liu, D. P. Pope and J. O. Stiegler (TMS, Warrendale, Pennsylvania, 1990) p. 485.

    Google Scholar 

  32. C. T. Liu, F. H. Froes andJ. O. Stiegler, in “Metals Handbook”, 10th Edn, Vol. 2 (ASM International, Materials Park, Ohio, 1990) p. 913.

    Google Scholar 

  33. Y-W. Kim, in Proceedings “High Temperature Ordered Intermetallic Alloys IV”, series Vol. 213, edited by L. A. Johnson, D. P. Pope and J. O. Stiegler (MRS, Pittsburgh, Pennsylvania, 1991) p. 777.

    Google Scholar 

  34. E. F. Bradley, in Proceedings of Gorham Advanced Materials Institute Conference, “Investment, Licensing and Strategic Partnering Opportunities, Emerging Technology, Applications, and Markets for Aluminides, Iron, Nickel and Titanium”, Monterey, California, November 1989.

  35. R. E. Schafrik,Met. Trans. 8A (1977) 1003.

    CAS  Google Scholar 

  36. N. S. Choudhury, H. C. Graham andJ. W. Hinze,J. Electrochem. Soc. 123 (1976) 668.

    Google Scholar 

  37. M. Khobaib andF. W. Vahldiek, in “Space Age Metals Technology”, edited by F. H. Froes and R. A. Cull (SAMPE, Covina, California, 1988) p. 262.

    Google Scholar 

  38. J. Subrahmanyam,J. Mater. Sci. 23 (1988) 1906.

    Article  CAS  Google Scholar 

  39. C. G. Pantano andE. J. H. Chen (eds), “Interfaces in Composites” (MRS, Pittsburgh, 1990).

    Google Scholar 

  40. R. B. Bhagat, A. H. Clauer, P. Kumar andA. M. Ritter (eds), “Metal and Ceramic Matrix Composites: Processing, Modeling and Mechanical Behavior” (TMS, Warrendale, Pennsylvania, 1990).

    Google Scholar 

  41. D. L. Anton, P. L. Martin, D. B. Miracle andR. McMeeking (eds), “Intermetallic Matrix Composites”, series Vol. 194 (MRS, Pittsburgh, 1990).

    Google Scholar 

  42. R. Y. Lin, R. J. Arsenault, G. P. Martins andS. G. Fishman (eds), “Interfaces in Metal-Ceramic Composites” (TMS, Warrendale, Pennsylvania, 1990).

    Google Scholar 

  43. C. C. Koch, C. T. Liu andN. S. Stoloff (eds), “High-Temperature Ordered Intermetallic Alloys”, series Vol. 39 (MRS, Pittsburgh, 1985).

    Google Scholar 

  44. N. S. Stoloff, C. C. Koch, C. T. Liu andO. Izumi (eds), “High-Temperature Ordered Intermetallic Alloys II”, series Vol. 81 (MRS, Pittsburgh, 1987).

    Google Scholar 

  45. C. T. Liu, A. I. Taub, N. S. Stoloff andC. C. Koch (eds), “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133 (MRS, Pittsburgh, 1989).

    Google Scholar 

  46. S. H. Whang, C. T. Liu, D. P. Pope andJ. O. Stiegler (eds), “High-Temperature Aluminides and Intermetallics” (TMS, Warrendale, Pennsylvania, 1990).

    Google Scholar 

  47. L. A. Johnson, D. P. Pope andJ. O. Stiegler (eds), “High-Temperature Ordered Intermetallic Alloys IV”, series Vol. 213 (MRS, Pittsburgh, 1991).

    Google Scholar 

  48. J. B. McAndrew andD. McPherson, WADC-TR-53-182, Part II (WPAFB, Ohio, 1955) andTrans. AIME 206 (1956) 1348.

    Google Scholar 

  49. J. B. McAndrew andC. R. Simcoe, WADD-TR-60-99 (WPAFB, Ohio, 1960).

    Google Scholar 

  50. E. Van Erkelenz,Metall. Erz. 20(11) (1923) 206.

    Google Scholar 

  51. W. Manchot andA. Leber,Z. Anorg. Chem. 150 (1926) 26.

    CAS  Google Scholar 

  52. H. R. Ogden, D. J. Maykuth, W. L. Finlay andR. I. Jaffee,Trans. AIME 191 (1951) 1150.

    Google Scholar 

  53. E. S. Bumps, H. D. Kessler andM. Hansen,ibid. 194 (1952) 609.

    Google Scholar 

  54. I. I. Kornilov, E. N. Pylaeva andM. A. Volkova,Akad. Nauk SSSR, Otd. Khim. Nauk 7 (1956) 771.

    Google Scholar 

  55. E. Ence andH. Margolin,Trans. AIME 221 (1961) 151.

    CAS  Google Scholar 

  56. I. I. Kornilov, E. N. Pylaeva, M. A. Volkova, P. I. Kripyakevich andV. Y. Maekiv,Dokl. Akad. Nauk SSSR 161 (1965) 843.

    CAS  Google Scholar 

  57. A. Raman andK. Schubert,Z. Metallkde 56 (1965) 44.

    CAS  Google Scholar 

  58. M. J. Blackburn,Trans. AIME 239 (1967) 1200.

    CAS  Google Scholar 

  59. F. J. J. Van Loo andG. D. Rieck,Acta Metall. 21 (1973) 73.

    Article  Google Scholar 

  60. R. D. Shull, A. J. McAlister andR. Reno, in “Titanium Science and Technology”, Vol. 4, edited by G. Lutjering, U. Zwicker and W. Bunk (DGM, Oberursel, Germany, 1985) p. 1459.

    Google Scholar 

  61. J. L. Murray, “Phase Diagrams of Binary Titanium Alloys” (ASM International, Materials Park, Ohio, 1987) p. 12.

    Google Scholar 

  62. Idem, Met. Trans. 19A (1988) 243.

    CAS  Google Scholar 

  63. C. McCullogh, J. J. Valencia, H. Matoes, C. G. Levi, R. Mehrabian andK. A. Rhyne,Scripta Metall. 22 (1988) 1131.

    Article  Google Scholar 

  64. C. McCullogh, J. J. Valencia, C. G. Levi andR. Mehrabian,Acta Metall. 37 (1989) 1321.

    Article  Google Scholar 

  65. S. C. Huang andP. A. Siemers,Met. Trans. 20A (1989) 1899.

    CAS  Google Scholar 

  66. R. G. Rowe andS. C. Huang,Israel J. Tech. 24 (1988) 255.

    CAS  Google Scholar 

  67. S. C. Huang, E. L. Hall andM. F. X. Giglotti, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 1109.

    Google Scholar 

  68. K. Kaltenbach, S. Gama, D. G. Pinatti, K. Schulze andE-T. Henig,Z. Metallkde. 80 (1989) 535.

    CAS  Google Scholar 

  69. D. Banerjee, T. K. Nandy, A. K. Gogia andK. Muraleedharan, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 1091.

    Google Scholar 

  70. M. J. Kaufman, T. F. Broderick, C. H. Ward, J. K. Kim, R. G. Rowe andF. H. Froes, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 985.

    Google Scholar 

  71. T. J. Jewett, J. C. Lin, N. R. Bonda, L. E. Seitzman, K. C. Hsieh, Y. A. Chang andJ. H. Perepezko, in “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 69.

    Google Scholar 

  72. T. Tsujimoto andK. Hashimoto,ibid.in p. 391.

    Google Scholar 

  73. J. H. Perepezko, Y. A. Chang, L. E. Seitzman, J. C. Lin, N. R. Bonda, T. J. Jewett andJ. C. Mishurda, in “High-Temperature Aluminides and Intermetallics”, edited by S. H. Whang, C. T. Liu, D. P. Pope and J. O. Stiegler (TMS, Warrendale, Pennsylvania, 1990) p. 19.

    Google Scholar 

  74. C. Suryanarayana andD. S. Lee,Scripta Metall. in press.

  75. R. Strychor, J. C. Williams andW. A. Soffa,Met. Trans. 19A (1988) 225.

    CAS  Google Scholar 

  76. A. G. Jackson, K. R. Teal, D. Eylon, F. H. Froes andS. J. Savage, in “Rapidly Solidified Alloys and Their Mechanical and Magnetic Properties”, series Vol. 58, edited by B. C. Giessen, D. E. Polk and A. I. Taub (MRS, Pittsburgh, 1986) p. 365.

    Google Scholar 

  77. T. F. Broderick, K. R. Teal andF. H. Froes, unpublished work, WPAFB, Ohio (1987).

  78. D. Banerjee, A. K. Gogia, T. K. Nandi andV. A. Joshi,Acta Metall. 36 (1988) 871.

    Article  CAS  Google Scholar 

  79. L. A. Bendersky, W. J. Boettinger, B. P. Burton, F. S. Biancaniello andC. B. Shoemaker,ibid. 38 (1990) 931.

    Article  CAS  Google Scholar 

  80. P. Villars andL. D. Calvert, “Pearson's Handbook of Crystallographic Data for Intermetallic Phases” (ASM International, Metals Park, Ohio, 1985).

    Google Scholar 

  81. K. Muraleedharan, S. V. Nagender Naidu andD. Banerjee,Scripta Metall. 24 (1990) 27.

    Article  CAS  Google Scholar 

  82. R. G. Rowe, in “High-Temperature Aluminides and Intermetallics”, edited by S. H. Whang, C. T. Liu, D. P. Pope and J. O. Stiegler (TMS, Warrendale, Pennsylvania, 1990) p. 375.

    Google Scholar 

  83. J. M. Larsen, K. A. Williams, S. J. Balsone andM. A. Stucke,ibid.in “ p. 521.

    Google Scholar 

  84. M. J. Blackburn, D. L. Ruckle andC. E. Bevan, Technical Report AFML-TR-78-18 (WPAFB, Ohio, 1978).

    Google Scholar 

  85. M. J. Blackburn andM. P. Smith, Technical Report AFWAL-TR-81-4046 (WPAFB, Ohio, 1981).

    Google Scholar 

  86. Idem, Interim Technical Report FR-19139 (United Technologies, East Hartford, Connecticut, 1988).

    Google Scholar 

  87. H. B. Bomberger, Technical Report WRDC-TR-89-4036 (WPAFB, Ohio, 1989).

    Google Scholar 

  88. H. A. Lipsitt, D. Shechtman andR. E. Schafrik,Met. Trans. 11A (1980) 1369.

    CAS  Google Scholar 

  89. S. A. Court, J. P. A. Lofvander, M. H. Loretto andH. L. Fraser,Phil. Mag. 59 (1989) 379.

    CAS  Google Scholar 

  90. P. L. Martin, H. A. Lipsitt, N. T. Nuhfer andJ. C. Williams, in “Titanium 80: Science and Technology”, Vol. 2, edited by H. Kimura and O. Izumi (TMS, Warrendale, Pennsylvania, 1980) p. 1245.

    Google Scholar 

  91. M. J. Blackburn andM. P. Smith, Technical Report WRDC-TR-89-4095 (WPAFB, Ohio, 1989).

    Google Scholar 

  92. M. J. Blackburn andM. P. Smith, US Patent 4 294 615 (1981).

  93. M. J. Blackburn, J. T. Hill andM. P. Smith, AFWAL-TR-84-4078 (WPAFB, Ohio, 1984).

    Google Scholar 

  94. P. K. Brindley, S. L. Draper, M. V. Nathal andJ. I. Eldridge, in “Fundamental Relationships Between Microstructure and Mechanical Properties of Metal Matrix Composites”, edited by P. K. Liaw and M. N. Gungar (TMS, Warrendale, Pennsylvania, 1990) p. 387.

    Google Scholar 

  95. D. A. Koss, D. Banerjee, D. A. Lukasak andA. K. Gogia, in “High-Temperature Aluminides and Intermetallics”, edited by S. H. Whang, C. T. Liu, D. P. Pope and J. O. Stiegler (TMS, Warrendale, Pennsylvania, 1990) p. 175.

    Google Scholar 

  96. J. W. Newkirk andG. B. Feldewerth, in “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 681.

    Google Scholar 

  97. C. H. Ward, J. C. Williams, A. W. Thompson, D. G. Rosenthal andF. H. Froes, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 1103.

    Google Scholar 

  98. A. K. Gogia, T. K. Nandy, D. Banerjee andY. Mahajan,ibid.in p. 1097.

    Google Scholar 

  99. J. C. Williams andM. J. Blackburn, in “Ordered Alloys”, edited by B. H. Kear, C. T. Sims, N. S. Stoloff and J. H. Westbrook (Claitor, Baton Rouge, Louisiana, 1970) p. 425

    Google Scholar 

  100. S. M. L. Sastry andH. A. Lipsitt,Met. Trans. 8A (1977) 1543.

    CAS  Google Scholar 

  101. Idem, in “Titanium 80: Science and Technology”, Vol. 2, edited by H. Kimura and O. Izumi (TMS, Warrendale, Pennsylvania, 1980) p. 1231.

    Google Scholar 

  102. S. A. Court, J. P. A. Lofvander, M. H. Loretto andH. L. Fraser,Phil. Mag. 61 (1990) 109.

    CAS  Google Scholar 

  103. A. K. Gogia, D. Banerjee andT. K. Nandy,Met. Trans. 21A (1990) 609.

    CAS  Google Scholar 

  104. M. Thomas, A. Vassel andP. Veyssiere,Scripta Metall. 21 (1987) 501.

    Article  CAS  Google Scholar 

  105. B. J. Marquardt, G. K. Scarr, J. C. Chestnut, C. G. Rhodes andH. L. Fraser, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 955.

    Google Scholar 

  106. J. P. A. Lofvander, S. A. Court, M. H. Loretto andH. L. Fraser,Phil. Mag. Lett. 60, (1989) 111.

    CAS  Google Scholar 

  107. J. C. Williams, in “Titanium and Titanium Alloys”, Vol. 2, edited by J. C. Williams and A. F. Belov (Plenum, New York, 1982) p. 1477.

    Google Scholar 

  108. J. C. Williams, B. S. Hickman andH. L. Marcus,Met. Trans. 2 (1971) 1913.

    CAS  Google Scholar 

  109. D. Banerjee, A. K. Gogia andT. K. Nandy,ibid. 21A (1990) 627.

    CAS  Google Scholar 

  110. K. Cho andJ. Gurland,ibid. 19A (1988) 2027.

    CAS  Google Scholar 

  111. A. K. Gogia, T. K. Nandy, D. Banerjee andY. Mahajan, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 1097.

    Google Scholar 

  112. Zou Dunxu, Central Iron and Steel Research Institute, Beijing, Private Communication (1991).

  113. D. A. Lukasak andD. A. Koss,Met. Trans. 21A (1990) 135.

    CAS  Google Scholar 

  114. R. W. Hertzberg, “Deformation and Fracture Mechanics of Engineering Materials, 2nd Ed (Wiley, New York, 1983).

    Google Scholar 

  115. M. A. Stucke andH. A. Lipsitt, in “Titanium Rapid Solidification Technology”, edited by F. H. Froes and D. Eylon (TMS, Warrendale, Pennsylvania, 1986) p. 255.

    Google Scholar 

  116. W. Cho, “Effect of Microstructure on Deformation and Creep Behavior of Ti-25Al-10Nb-3V-1Mo”, Technical Report (Air Force Office of Scientific Research, Bolling Air Force Base, Washington, DC, 1988).

    Google Scholar 

  117. C. G. Rhodes, in Proceedings of 6th World Conference on Titanium, Vol. 1, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 199.

    Google Scholar 

  118. M. G. Mendiratta andH. A. Lipsitt,J. Mater. Sci. 15 (1980) 2985.

    Article  CAS  Google Scholar 

  119. S-C. Huang andE. L. Hall, in “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 373.

    Google Scholar 

  120. T. Tsujimoto andK. Hashimoto,ibid.in p. 391.

    Google Scholar 

  121. C. R. Feng, D. J. Michel andC. R. Crowe,ibid.in p. 669.

    Google Scholar 

  122. I. A. Zelonkov andYe. N. Martynchik,Metallofizika, Naukova Dumka 42 (1972) 63.

    Google Scholar 

  123. T. Kawabata, M. Tadano andO. Izumi,Scripta Metall. 22 (1988) 1725.

    Article  CAS  Google Scholar 

  124. A. B. Notkin andA. Molotkov, All Union Institute for Light Alloys, Moscow, Private Communication (1991).

  125. R. Z. Valiev, Institute for Metals Superplasticity Problems, USSR Academy of Sciences, Khalturina, Private Communication (1991).

  126. T. Kawabata, T. Kanai andO. Izumi,Acta Metall. 33 (1985) 1355.

    Article  CAS  Google Scholar 

  127. S. H. Whang andY. D. Hahn,Scripta Met. Mater. 24 (1990) 485.

    Article  CAS  Google Scholar 

  128. D. Shechtman, M. J. Blackburn andH. A. Lipsitt,Met. Trans. 5 (1974) 1373.

    CAS  Google Scholar 

  129. H. A. Lipsitt, D. Shechtman andR. E. Schafrik,ibid. 6A (1975) 1991.

    CAS  Google Scholar 

  130. T. Kawabata andO. Izumi, in “High-Temperature Aluminides and Intermetallics”, edited by S. H. Whang, C. T. Liu, D. P. Pope and J. O. Stiegler (TMS, Warrendale, Pennsylvania, 1990) p. 403.

    Google Scholar 

  131. S. H. Whang andY. D. Hahn,ibid.in “ p. 91.

    Google Scholar 

  132. B. A. Greenberg, O. V. Antonova, V. N. Indenbaum, L. E. Karkina, A. B. Notkin andM. V. Ponomarev, Preprint No. 89/7 (USSR Academy of Sciences Ural Division, Sverdlovsk, 1989).

    Google Scholar 

  133. M. J. Marcinkowski, N. Brown andR. M. Fischer,Acta Metall. 9 (1961) 129.

    Article  CAS  Google Scholar 

  134. G. Hug, A. Loiseau andP. Veyssiere,Phil Mag. A57 (1988) 499.

    Google Scholar 

  135. S. H. Whang andY. D. Hahn, in “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 687.

    Google Scholar 

  136. S. C. Huang andE. L. Hall,ibid.in p. 373.

    Google Scholar 

  137. J. Y. Kim, Y. D. Hahn andS. H. Whang,Scripta Met. Mater. 25 (1991) 548.

    Google Scholar 

  138. Y. D. Hahn andS. H. Whang,ibid. 24 (1990) 139.

    Article  CAS  Google Scholar 

  139. S. H. Whang andY. D. Hahn,ibid. 24 (1990) 1679.

    Article  CAS  Google Scholar 

  140. Y. D. Hahn andS. H. Whang,Met. Trans. A in press.

  141. T. Kawabata andO. Izumi,Scripta Metall 21 (1987) 435.

    Article  CAS  Google Scholar 

  142. E. L. Hall andS. C. Huang, in “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 693.

    Google Scholar 

  143. T. Kawabata, M. Tadano andO. Izumi,Scripta Metall. 22 (1988) 1725.

    Article  CAS  Google Scholar 

  144. V. K. Vasudevan, S. A. Court, P. Kurath andH. L. Fraser,ibid. 23 (1989) 907.

    Article  CAS  Google Scholar 

  145. S. A. Court, V. K. Vasudevan andH. L. Fraser,Phil. Mag. A61 (1990) 141.

    Google Scholar 

  146. B. A. Greenberg,Phys. Status Solidi (b)55 (1973) 59.

    Google Scholar 

  147. T. Fujiwara, A. Nakamura, M. Hosomi, S. R. Nishitani, Y. Shirai andM. Yamaguchi,Phil. Mag. A61 (1990) 591.

    Google Scholar 

  148. T. Hanamura andM. Tanino,J. Mater. Sci. Lett. 8 (1989) 24.

    Article  CAS  Google Scholar 

  149. M. Yamaguchi, S. R. Nishitani andY. Shirai, in “High-Temperature Aluminides and Intermetallics”, edited by S. H. Whang, C. T. Liu, D. P. Pope and J. O. Stiegler (TMS, Warrendale, Pennsylvania, 1990) p. 63.

    Google Scholar 

  150. R. A. Amato, J. C. Chesnutt, M. F. X. Gigliotti, S. C. Huang, D. G. Konitzer, M. M. Lee, R. G. Rowe, G. K. Scarr andP. A. Zomcik, Interim Report No. 6, Contract F33615-86-C-5073 (WPAFB, Ohio, 1989).

    Google Scholar 

  151. H. R. Ogden, D. J. Maykuth, W. L. Finlay andR. I. Jaffee,JOM (February 1953) 267.

  152. M. J. Blackburn andM. P. Smith, AFML-TR-79-4056 (WPAFB, Ohio, 1979).

    Google Scholar 

  153. T. Tsujimoto, K. Hashimoto, M. Nobuki andH. Suga,Trans. Jpn Inst. Metals 27 (1986) 341.

    Google Scholar 

  154. S. M. Barinov, T. T. Nartova, Y. L. Krasulin andT. V. Mogutova,Izvestiya Akademii Nauk USSR 5 (1983) 170.

    Google Scholar 

  155. T. Takahashi andH. Oikawa, in “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 699.

    Google Scholar 

  156. H. Oikawa, in “High-Temperature Aluminides and Intermetallics”, edited by S. H. Whang, C. T. Liu, D. P. Pope and J. O. Stiegler (TMS, Warrendale, Pennsylvania, 1990) p. 353.

    Google Scholar 

  157. H. B. Bomberger andF. H. Froes, in “Titanium Technology: Present Status and Future Trends”, edited by F. H. Froes, D. Eylon and H. B. Bomberger (Titanium Development Association, Dayton, Ohio, 1985) p. 25.

    Google Scholar 

  158. T. E. O'Connel, AFWAL-TR-83-4050 (WPAFB, Ohio, 1983).

    Google Scholar 

  159. P. J. Bania, Timet, Henderson, Nevada, Private Communications (1991).

  160. H. B. Bomberger, US Patent 3 679 403 (1972).

  161. Idem, US Patent 3 963 525 (1976).

  162. idem, US Patent 4 129 438 (1978).

  163. R. M. German, “Powder Metallurgy Science” (MPIF, Princeton, 1984).

    Google Scholar 

  164. H. Jones, “Rapid Solidification of Metals and Alloys”, Monograph No. 8 (Institution of Metallurgists, London, UK, 1982).

    Google Scholar 

  165. F. H. Froes andD. Eylon,Int. Mater. Rev. 35 (1990) 162.

    CAS  Google Scholar 

  166. F. H. Froes andR. G. Rowe, in “Rapidly Solidified Alloys and Their Mechanical and Magnetic Properties”, series Vol. 58, edited by B. C. Giessen, D. E. Polk and A. I. Taub (MRS, Pittsburgh, 1986) p. 309.

    Google Scholar 

  167. T. R. Anantharaman andC. Suryanarayana, “Rapidly Solidified Metals — A Technological Overview” (Trans Tech, Aedermannsdorf, Switzerland, 1987).

    Google Scholar 

  168. F. H. Froes andR. G. Rowe, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 801.

    Google Scholar 

  169. C. Suryanarayana, F. H. Froes andR. G. Rowe,Int. Mater. Rev. 36 (1991) 85.

    CAS  Google Scholar 

  170. R. Sundaresan andF. H. Froes,JOM 39 (8) (1987) 22.

    CAS  Google Scholar 

  171. Idem, Met. Powd. Rep. 44 (1989) 195.

    Google Scholar 

  172. C. Suryanarayana, R. Sundaresan andF. H. Froes, in “Structural Applications of Mechanical Alloying”, edited by F. H. Froes and J. J. de Barbadillo (ASM International, Materials Park, Ohio, 1990) p. 193.

    Google Scholar 

  173. R. R. Oddone andR. M. German, in “Advances in Powder Metallurgy”, edited by T. G. Gasbarre and W. F. Jandeska Jr (MPIF, Princeton, 1989) p. 475.

    Google Scholar 

  174. R. E. Schafrik,Met. Trans. 7B (1976) 713.

    Google Scholar 

  175. Ch. Hartig, S. Chen, P. A. Beaven andH. Fukutomi, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 1021.

    Google Scholar 

  176. D. D. Bhatt, G. E. Meyer andA. L. Hoffmanner, AFML-TR-87-59 (WPAFB, Ohio, 1978).

    Google Scholar 

  177. T. E. O'Connell andJ. A. Miller, Interim Technical Report AFML-TR-78-129 (WPAFB, Ohio, 1978).

    Google Scholar 

  178. P. R. Roberts, in “Advances in Powder Metallurgy”, edited by T. G. Gasbarre and W. F. Jandeska Jr (MPIF, Princeton, 1989) p. 427.

    Google Scholar 

  179. A. P. Woodfield, R. A. Amato andC. F. Yolton,ibid.in “ p. 413.

    Google Scholar 

  180. J. H. Moll, C. F. Yolton andB. J. McTiernan,Int. J. Powd. Metall. 26 (1990) 149.

    CAS  Google Scholar 

  181. F. H. Froes andR. G. Rowe, Unpublished Work, WPAFB, Ohio (1985–87).

  182. C. Suryanarayana andF. H. Froes, University of Idaho, Moscow, Idaho, Work in Progress (1991).

  183. F. H. Froes andD. Eylon (eds), “Titanium — Rapid Solidification Technology” (TMS, Warrendale, Pennsylvania, 1986).

    Google Scholar 

  184. F. H. Froes andS. J. Savage, (eds), “Processing of Structural Metals by Rapid Solidification” (ASM International, Materials Park, Ohio, 1987).

    Google Scholar 

  185. F. H. Froes andR. G. Rowe, in “Titanium — Rapid Solidification Technology”, edited by F. H. Froes and D. Eylon (TMS, Warrendale, Pennsylvania, 1986) p. 1.

    Google Scholar 

  186. H. B. Bomberger andF. H. Froes,ibid.in “ p. 21.

    Google Scholar 

  187. R. G. Rowe andF. H. Froes, in “Processing of Structural Metals by Rapid Solidification”, edited by F. H. Froes and S. J. Savage (ASM International, Materials Park, Ohio, 1987) p. 163.

    Google Scholar 

  188. C. Suryanarayana andF. H. Froes,JOM 42(3) (1990) 22.

    CAS  Google Scholar 

  189. R. G. Rowe, J. A. Sutliff andE. F. Kock, in “Titanium — Rapid Solidification Technology”, edited by F. H. Froes and D. Eylon (TMS, Warrendale, Pennsylvania, 1986) p. 239.

    Google Scholar 

  190. R. G. Rowe, A. I. Taub andF. H. Froes, in “Rapid Solidification Processing: Principles and Technologies IV”, edited by R. Mehrabian and P. A. Parrish (Claitor, Baton Rouge, Louisiana, 1988) p. 149.

    Google Scholar 

  191. K. R. Teal, A. G. Jackson, D. Eylon andF. H. Froes, in “Titanium — Rapid Solidification Technology”, edited by F. H. Froes and D. Eylon (TMS, Warrendale, Pennsylvania, 1986) p. 231.

    Google Scholar 

  192. R. G. Rowe, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 979.

    Google Scholar 

  193. C. H. Ward, T. F. Broderick, A. G. Jackson, R. G. Rowe andF. H. Froes, in “Processing of Structural Metals by Rapid Solidification”, edited by F. H. Froes and S. J. Savage (ASM International, Materials Park, Ohio, 1987) p. 243.

    Google Scholar 

  194. J. W. Sears, J. P. A. Lofvander, R. Wheeler, M. A. Stucke, S. A. Court andH. L. Fraser, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 1115.

    Google Scholar 

  195. S. C. Jha, R. Ray, K. R. Teal andF. H. Froes,ibid.in p. 961.

    Google Scholar 

  196. J. A. Sutliff andR. G. Rowe, in “Rapidly Solidified Alloys and Their Mechanical and Magnetic Properties”, series Vol. 58, edited by B. C. Giessen, D. E. Polk and A. I. Taub (MRS, Pittsburgh, 1986) p. 371.

    Google Scholar 

  197. G. Venkataraman, A. G. Jackson, K. R. Teal andF. H. Froes,Mater. Sci. Engng 98 (1988) 257.

    Article  Google Scholar 

  198. G. Venkataraman, K. R. Teal andF. H. Froes, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 967.

    Google Scholar 

  199. G. Venkataraman, A. G. Jackson andF. H. Froes,ibid.in p. 973.

    Google Scholar 

  200. F. H. Froes andJ. R. Pickens,JOM 36(1) (1984) 14.

    CAS  Google Scholar 

  201. F. H. Froes, Y-W. Kim andF. Hehmann,ibid. 39(8) (1987) 14.

    CAS  Google Scholar 

  202. C. Suryanarayana, F. H. Froes, S. Krishnamurthy andY-W. Kim,Int. J. Powd. Metall. 26 (1990) 117.

    CAS  Google Scholar 

  203. T. C. Peng, B. London andS. M. L. Sastry, in “Advances in Powder Metallurgy”, edited by T. G. Gasbarre and W. F. Jandeska Jr (MPIF, Princeton, 1989) p. 387.

    Google Scholar 

  204. D. Vujic, Z. X. Li andS. H. Whang,Met. Trans. 19A (1988) 2445.

    CAS  Google Scholar 

  205. S. C. Huang, E. L. Hall andM. F. X. Gigliotti, in “High-Temperature Ordered Intermetallic Alloys II”, series Vol. 81, edited by N. S. Stoloff, C. C. Koch, C. T. Liu and O. Izumi (MRS, Pittsburgh, 1987) p. 481.

    Google Scholar 

  206. J. A. Graves, L. A. Bendersky, F. S. Biancaniello, J. H. Perepezko andW. J. Boettinger,Mater. Sci. Engng 98 (1988) 265.

    Article  CAS  Google Scholar 

  207. C. McCullough, J. J. Valencia, C. G. Levi andR. Mehrabian,Scripta Metall. 21 (1987) 1341.

    Article  Google Scholar 

  208. J. A. Graves, J. H. Perepezko, C. H. Ward andF. H. Froes,ibid. 21 (1987) 567.

    Article  CAS  Google Scholar 

  209. J. C. Mishurda, J. H. Perepezko, J. A. Graves andF. H. Froes, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 1127.

    Google Scholar 

  210. D. S. Shih, G. K. Scarr andJ. C. Chesnutt, in “High-Temperature Ordered Intermetallics III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 167.

    Google Scholar 

  211. E. L. Hall andS. C. Huang, GE Corporate R & D Center, Schenectady, NY, Work in Progress (1990–91).

  212. S. C. Huang, GE Corporate R & D Center, Schenectady, NY, Private Communication (1989).

  213. E. L. Hall andS. C. Huang, in “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 693.

    Google Scholar 

  214. C. Suryanarayana, R. Sundaresan andF. H. Froes, in “Solid State Powder Processing”, edited by A. H. Clauer and J. J. de Barbadillo (TMS, Warrendale, Pennsylvania, 1990) p. 55.

    Google Scholar 

  215. F. H. Froes andD. Eylon, in “Hydrogen Effects on Materials Behavior”, edited by N. R. Moody and A. W. Thompson (TMS, Warrendale, Pennsylvania, 1990) p. 261.

    Google Scholar 

  216. F. H. Froes, D. Eylon andC. Suryanarayana,JOM 42(3) (1990) 26.

    CAS  Google Scholar 

  217. L. S. Steele, D. Eylon, K. R. Teal, I. Weiss andF. H. Froes, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 1009.

    Google Scholar 

  218. L. S. Steele, D. Eylon andF. H. Froes, in “Advances in Powder Metallurgy”, edited by T. G. Gasbarre and W. F. Jandeska Jr (MPIF, Princeton, 1989) p. 509.

    Google Scholar 

  219. I. S. Polkin, All Union Institute for Light Alloys, Moscow, USSR, Private Communication (1989).

  220. D. S. Shong, Y-W. Kim, C. F. Yolton andF. H. Froes, in “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 711.

    Google Scholar 

  221. L. S. Sigl, P. A. Mataga, J. Dalgleish, R. M. McMeeking andA. G. Evans,Acta Metall. 36 (1988) 945.

    Article  CAS  Google Scholar 

  222. M. S. Newkirk, A. W. Urghart andH. R. Zwicker,J. Mater. Res. 1 (1986) 81.

    CAS  Google Scholar 

  223. I. Aksay andA. Pysik, in “Ceramic Microstructures: Role of Interfaces”, edited by J. A. Pask and A. G. Evans (Plenum, New York, 1987) pp. 1–17.

    Google Scholar 

  224. J. Breme andTh. Weik, in Proceedings of 6th World Conference on Titanium, Vol. 2, edited by P. Lacombe, R. Tricot and G. Beranger (Editions de Physique, Les Ulis Cedex, France, 1989) p. 1003.

    Google Scholar 

  225. C. K. Elliott, G. R. Odette, G. E. Lucas andJ. W. Scheckherd, in “High Temperature/High Performance Composites”, series Vol. 120, edited by F. D. Lemkey, A. G. Evans, S. G. Fishman and J. R. Strife (MRS, Pittsburgh, 1988) p. 95.

    Google Scholar 

  226. G. R. Odette, H. E. Dève, C. K. Elliott, A. Hasegawa andG. E. Lucas, in “Interfaces in Metal-Ceramic Composites”, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (TMS, Warrendale, Pennsylvania, 1990) p. 443.

    Google Scholar 

  227. S. M. L. Sastry andR. J. Lederich, McDonnell-Douglas Research Laboratories, St. Louis, reported at Conference on Current Topics on Intermetallics for Structural Applications, Neuchatel, Switzerland, March 1989.

  228. J. C. Lin, Y. A. Chang andJ. H. Perepezko,Scripta Metall. in press.

  229. K. K. Chawla, “Composite Materials — Science and Technology” (Springer, New York, 1987).

    Google Scholar 

  230. D. M. Dimiduk andD. B. Miracle, in “High-Temperature Ordered Intermetallic Alloys III”, series Vol. 133, edited by C. T. Liu, A. I. Taub, N. S. Stoloff and C. C. Koch (MRS, Pittsburgh, 1989) p. 349.

    Google Scholar 

  231. P. R. Smith andF. H. Froes,JOM 36(3) (1984) 19.

    CAS  Google Scholar 

  232. Idem., Chinese J. Mater. Engng No. 3 (Sum No. 100) (June 1990) 1.

    Google Scholar 

  233. P. R. Smith, F. H. Froes andJ. Cammett, in “Mechanical Behavior of Metal Matrix Composites”, edited by J. E. Hack and M. F. Amateau (TMS, Warrendale, Pennsylvania, 1983) p. 143.

    Google Scholar 

  234. Aviation Week (November 28 1988) 46.

  235. M. Mittnick,SAMPE J. 26(5) (1990) 49.

    CAS  Google Scholar 

  236. M. A. Mittnick andJ. McElman, in Proceedings of 13th Conference on Metal Matrix Composites, Vol. 2, edited by J. D. Buckley, NASA Conference Publication No. 3054 (NASA, Washington, DC, 1990) p. 389.

    Google Scholar 

  237. M. Mittnick andF. H. Froes, in “Metal Matrix Composites”, edited by A. R. Begg (Arnold, Sevenoaks, Kent, UK, 1991).

    Google Scholar 

  238. P. K. Brindley, in “High-Temperature Ordered Inter-metallic Alloys II”, series Vol. 81, edited by N. S. Stoloff, C. C. Koch, C. T. Liu and O. Izumi (MRS, Pittsburgh, 1987) p. 419.

    Google Scholar 

  239. D. L. McDaniels andJ. R. Stephens, NASA Technical Memorandum 100844 (Lewis Research Center, Cleveland, Ohio, 1988).

    Google Scholar 

  240. S. G. Fishman, in “Interfaces in Metal-Ceramic Composites”, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (TMS, Warrendale, Pennsylvania, 1990) p. 3.

    Google Scholar 

  241. S. Krishnamurthy,ibid.in “ p. 75.

    Google Scholar 

  242. R. P. Nimmer, R. J. Barkert, E. S. Russell andG. A. Smith, in Proceedings of ASM International Materials Week, October 1989, in press.

  243. P. K. Wright, R. Nimmer, G. Smith, M. Sonsmeier andM. Brun, in “Interfaces in Metal-Ceramic Composites”, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (TMS, Warrendale, Pennsylvania, 1990) p. 559.

    Google Scholar 

  244. D. S. Shong, Y-W. Kim, C. F. Yolton andF. H. Froes, in“Advances in Powder Metallurgy”, edited by T. G. Gasbarre and W. F. Jandeska Jr (MPIF, Princeton, 1989) p. 359.

    Google Scholar 

  245. A. G. Metcalfe andM. J. Klein, in “Composite Materials”, Vol. 1, edited by A. G. Metcalfe (Academic, New York, 1974) p. 125.

    Google Scholar 

  246. A. G. Metcalfe,J. Compos. Mater. 1 (1967) 356.

    CAS  Google Scholar 

  247. P. R. Smith, C. G. Rhodes andW. C. Revelos, in “Interfaces in Metal-Ceramic Composites”, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (TMS, Warrendale, Pennsylvania, 1990) p. 35.

    Google Scholar 

  248. D. R. Schuyler, M. M. Sohi andR. Mahapatra,ibid.in “ p. 475.

    Google Scholar 

  249. G. Das andF. H. Froes, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 907.

    Google Scholar 

  250. G. Das, in “Advances in Powder Metallurgy”, edited by T. G. Gasbarre and W. F. Jandeska Jr (MPIF, Princeton, 1989) p. 491.

    Google Scholar 

  251. C. G. Rhodes, M. S. Vassiliou, M. R. Mitchell andR. A. Spurling,Met. Trans. 21A (1990) 1589.

    CAS  Google Scholar 

  252. S. F. Baumann, P. K. Brindley andS. D. Smith,ibid. 21A (1990) 1559.

    CAS  Google Scholar 

  253. D. E. Boss andJ. M. Yang, in “Intermetallic Matrix Composites”, series Vol. 194, edited by D. L. Anton, P. L. Martin, D. B. Miracle and R. McMeeking (MRS, Pittsburgh, 1990) p. 429.

    Google Scholar 

  254. J. H. Norman, G. H. Reynolds andL. Brewer,ibid.in p. 369.

    Google Scholar 

  255. S. M. Jeng, C. J. Yang, J.-M. Yang, D. G. Rosenthal andJ. Goebel,ibid.in p. 277.

    Google Scholar 

  256. C. G. Rhodes, C. C. Bampton andJ. A. Graves,ibid.in p. 349.

    Google Scholar 

  257. A. M. Ritter, E. L. Hall andN. Lewis,ibid.in p. 413.

    Google Scholar 

  258. J. A. Dekock, Y. A. Chang, M-X. Zhang andO. Y. Chen, in “Interfaces in Composites”, Series170, edited by C. G. Pantano and E. J. Chen (MRS, Pittsburgh, 1990) p. 173.

    Google Scholar 

  259. D. R. Baker, P. J. Doorbar andM. H. Loretto,ibid.in, edited by C. G. Pantano and E. J. Chen (MRS, Pittsburgh, 1990) p. 85.

    Google Scholar 

  260. C. J. Yang, S. M. Jeng andJ-M. Yang,Scripta Metall. 24 (1990) 469.

    Article  CAS  Google Scholar 

  261. J. I. Eldridge andP. K. Brindley,J. Mater. Sci. Lett. 8 (1989) 1451.

    Article  CAS  Google Scholar 

  262. A. K. Misra, in “Interfaces in Metal-Ceramic Composites”, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (TMS, Warrendale, Pennsylvania, 1990) p. 85.

    Google Scholar 

  263. S. M. Russ,Met. Trans. 21A (1990) 1595.

    CAS  Google Scholar 

  264. M. Khairul Alam andS. C. Jain,JOM 42(11) (1990) 56.

    CAS  Google Scholar 

  265. S. Krishnamurthy andP. R. Smith, WPAFB, Ohio, Private Communication (1991).

  266. C. M. Ward-Close andP. G. Partridge,J. Mater Sci. 25 (1990) 4315.

    Article  CAS  Google Scholar 

  267. M. L. Gambone, WRDC-TR-89-4145, Vols 1 and 2 (WPAFB, Ohio, 1989).

    Google Scholar 

  268. K. R. Bain, M. L. Gambone andR. D. Zordan, in “Intermetallic Matrix Composites”, series Vol. 194, edited by D. L. Anton, P. L. Martin, D. B. Miracle and R. McMeeking (MRS, Pittsburgh, 1990) p. 271.

    Google Scholar 

  269. P. R. Smith andW. C. Revelos, in“Fatigue '90”, Vol. 3, edited by H. Kitagawa and T. Tanaka (Materials & Components Engineering, Birmingham, UK, 1990) p. 1711.

    Google Scholar 

  270. P. K. Brindley, P. A. Bartolotta andR. A. Mackay, “HITEMP Review 1989 — Advanced High Temperature Engine Materials Technology Program”, Report CP-10039 (NASA, Lewis, Cleveland, Ohio, 1989) p. 52–1.

    Google Scholar 

  271. L. Christodoulou andJ. M. Brupbacher,Mater. Edge 7 (November/December 1990) 29.

    Google Scholar 

  272. L. Christodoulou, P. A. Parrish andC. R. Crowe, in “High Temperature/High Performance Composites”, series Vol. 120, edited by F. D. Lemkey, A. G. Evans, S. G. Fishman and J. R. Strife (MRS, Pittsburgh, 1988) p. 29.

    Google Scholar 

  273. M. L. Adams, S. L. Kampe, A. R. Harmon andL. Christodoulou, in “Advances in Powder Metallurgy”, edited by T. G. Gasbarre and W. F. Jandeska Jr (MPIF, Princeton, 1989) p. 439.

    Google Scholar 

  274. S. L. Kampe, J. A. Clarke andL. Christodoulou, in “Intermetallic Matrix Composites”, series Vol. 194, edited by D. L. Anton, P. L. Martin, D. B. Miracle and R. McMeeking (MRS, Pittsburgh, 1990) p. 225.

    Google Scholar 

  275. D. E. Larsen, Jr. S. L. Kampe andL. Christodoulou,ibid. p. 285.

    Google Scholar 

  276. D. E. Larsen, M. L. Adams, S. L. Kampe, L. Christodoulou andJ. D. Bryant,Scripta Metall. 24 (1990) 851.

    Article  CAS  Google Scholar 

  277. O. Popoola, C. Cordier, P. Pirouz andA. H. Heuer, in “Interfaces in Metal-Ceramic Composites”, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (TMS, Warrendale, Pennsylvania, 1990) p. 465.

    Google Scholar 

  278. T. Christman, A. Needleman andS. Suresh,Acta Metall. 37 (1989) 3029.

    Article  CAS  Google Scholar 

  279. J. Rösler, J. J. Valencia, C. G. Levi, A. G. Evans andR. Mehrabian, in “Intermetallic Matrix Composites”, series Vol. 194, edited by D. L. Anton, P. L. Martin, D. B. Miracle and R. McMeeking (MRS, Pittsburgh, 1990) p. 241.

    Google Scholar 

  280. D. Dix,Defense News (July 16 1990) 7.

  281. D. Driver, in “High Temperature Materials for Power Engineering”, Part II, edited by E. Bachelet and D. Driver (Kluwer, The Netherlands, 1990) p. 883.

    Google Scholar 

  282. T. M. F. Ronald,Adv. Mater. Process. 135(5) (1989) 29.

    Google Scholar 

  283. V. P. McConnell,Adv. Compos. (November/December 1990) 37.

  284. J. Stringer,Acta Metall. 8 (1969) 758.

    Google Scholar 

  285. P. H. Morton andW. M. Baldwin,Trans. ASM 44 (1952) 1004.

    CAS  Google Scholar 

  286. A. E. Jenkins,J. Inst. Metals 84 (1955) 1.

    Google Scholar 

  287. P. Kofstad,J. Less-Common Metals 12 (1967) 449.

    Article  CAS  Google Scholar 

  288. D. Eliezer, University of Idaho, Moscow, Idaho, Work in Progress (1991).

  289. Y. Umakoshi, M. Yamaguchi, T. Sakagami andT. Yamane,J. Mater. Sci. 24 (1989) 1599.

    Article  CAS  Google Scholar 

  290. M. Simmond, A. Spilners andO. Katz,J. Metals 7 (1955) 645.

    Google Scholar 

  291. C. S. Giggins andF. S. Pettit,J. Electrochem. Soc. 118 (1971) 1782.

    CAS  Google Scholar 

  292. S. Krol andT. Gorecki, in “Titanium Science and Technology”, Vol. 4, edited by G. Lutjering, U. Zwicker and W. Bunk (DGM, Oberursel, Germany, 1985) p. 2695.

    Google Scholar 

  293. A. M. Chaze, C. Coddet andG. Beranger,J. Less-Common Metals 83 (1982) 49.

    Article  CAS  Google Scholar 

  294. V. V. Glazova,Russian Metall. No. 2 (1967) 116.

    Google Scholar 

  295. D. V. Ignotov, Z. I. Kornilova, E. M. Lazaver andV. M. Popova,ibid. No. 2 (1972) 150.

    Google Scholar 

  296. G. Welsch andA. I. Kahveci, in “Environmental Degradation of Engineering Materials III”, edited by M. R. Louthan Jr, R. P. McNitt and R. D. Sisson Jr (Pennsylvania State University, University Park, Pennsylvania, 1987) p. 47.

    Google Scholar 

  297. A. I. Kahveci, G. Welsch andG. E. Wasielewski, in Proceedings of 6th World Conference on Titanium, Vol. 2, Cannes, France, June 1988, edited by P. Lacombe, R. Tricot and G. Beranger (Les Editions de Physique, Les Ulis Cedex, France, 1989) p. 1015.

    Google Scholar 

  298. S. J. Balsone, in “Oxidation of High Temperature Intermetallics”, edited by T. Grobstein and J. Doychak (TMS-AIME, Warrendale, Pennsylvania, 1989) p. 219.

    Google Scholar 

  299. S. J. Balsone, T. Nicholas, D. C. Maxwell andM. Khobaib, in “Elevated Temperature Crack Growth”, edited by S. Mall and T. Nichols (American Society for Mechanical Engineering, New York, 18, 1990) p. 87.

    Google Scholar 

  300. M. Kabbaj, A. Galerie andM. Caillet,J. Less-Common Metals 108 (1985) 1.

    Article  CAS  Google Scholar 

  301. D. S. Shih, G. K. Scarr andG. E. Wasielewski,JOM 39 (7) (1987) 7.

    Google Scholar 

  302. D. E. Matejczyk andR. P. Jewett, in Proceedings of the 2nd NASP Hydrogen Materials Interaction Workshop, Publication No. 1004, edited by H. G. Nelson (NASA, Moffett Field, California, 1988) p. 137.

    Google Scholar 

  303. T. Fox, D. B. Knorr andN. S. Stoloff, Rensselaer Polytechnic Institute, Troy, New York, Unpublished Work (1989).

  304. D. Eliezer andF. H. Froes, University of Idaho, Moscow, Idaho, work in progress.

  305. J. H. Holbrook, H. J. Cialone andB. S. Majumdar, in Proceedings of 3rd NASP Hydrogen Materials Interactions, edited by H. G. Nelson (NASA, Moffett Field, California, 1989) in press.

    Google Scholar 

  306. W. Y. Chu, A. W. Thompson andJ. C. Williams, in “Hydrogen Effects on Materials Behavior”, edited by N. R. Moody and A. W. Thompson (TMS, Warrendale, Pennsylvania, 1990) p. 543.

    Google Scholar 

  307. M. Gao, J. B. Boodey andR. P. Wei,Scripta Met. Mater. 24 (1990) 2135.

    Article  CAS  Google Scholar 

  308. D. Eliezer, E. Manor andF. H. Froes, in “Hydrogen Effects on Materials Behavior”, edited by N. R. Moody and A. W. Thompson (TMS, Warrendale, Pennsylvania, 1990) p. 523.

    Google Scholar 

  309. E. Manor andD. Eliezer,Scripta Metall. 23 (1989) 1313.

    Article  CAS  Google Scholar 

  310. Idem, Scripta Met. Mater. 24 (1990) 129.

    Article  CAS  Google Scholar 

  311. H. G. Nelson, in “Space Age Metals Technology”, edited by F. H. Froes and R. A. Cull (SAMPE, Covina, California, 1988) p. 310.

    Google Scholar 

  312. L. G. Fritzemeir andM. A. Jacinto, in “Hydrogen Effects on Materials Behavior”, edited by N. R. Moody and A. W. Thompson (TMS, Warrendale, Pennsylvania, 1990) p. 533.

    Google Scholar 

  313. A. A. Sheimker andS. M. El-Soudani, in Proceedings of 3rd NASP Hydrogen Materials Interactions, edited by H. G. Nelson (NASA, Moffett Field, California, 1989) in press.

    Google Scholar 

  314. D. E. Matejczyk andC. G. Rhodes,Scripta Met. Mater. 24 (1990) 1369.

    Article  CAS  Google Scholar 

  315. L. Christodoulou andJ. A. Clarke, in “Hydrogen Effects on Materials Behavior”, edited by N. R. Moody and A. W. Thompson (TMS, Warrendale, Pennsylvania, 1990) p. 515.

    Google Scholar 

  316. F. H. Froes, J. J. deBarbadillo andC. Suryanarayana, in “Structural Applications of Mechanical Alloying”, edited by F. H. Froes and J. J. de Barbadillo (ASM International, Materials Park, Ohio, 1990) p. 1.

    Google Scholar 

  317. R. N. Hadcock,J. Aircraft 17 (9) (1980) 609.

    Article  Google Scholar 

  318. B. Dogan, “Intermetallic Alloys: Deformation, Mechanical and Fracture Behavior”, Report 88/E/53 (GKSS-Forschungszentrum Geesthacht GmBH, Germany, 1988).

    Google Scholar 

  319. B. Dogan, R. Wagner andP. A. Beaven,Scripta Met. Mater. 25 (1991) 773.

    Article  CAS  Google Scholar 

  320. Y. Nishiyama, T. Miyashita, S. Isobe andT. Noda, in “High-Temperature Aluminides and Intermetallics”, edited by S. H. Whang, C. T. Liu, D. P. Pope and J. O. Stiegler (TMS, Warrendale, Pennsylvania, 1990) p. 557.

    Google Scholar 

  321. R. Delagi (TI, Attleboro, Massachusetts), Private Communications (1990).

  322. C. Bassi, J. A. Peters andJ. Wittenauer,JOM 41 (9) (1989) 18.

    CAS  Google Scholar 

  323. N. Masahashi, M. Matsuo, Y. Mizuhara, M. Kimura andK. Hashimoto, in “Microstructure/Property Relationships in Titanium Alloys and Titanium Aluminides”, edited by Y-W. Kim and R. R. Boyer (TMS, Warrendale, Pennsylvania, 1991) in press.

    Google Scholar 

  324. K. Hashimoto, N. Masahashi, Y. Mizuhara, H. Fujii andM. Matsuo,ibid.in“

    Google Scholar 

  325. J. C. Williams andL. A. Johnson, GE/Aircraft Engines, Evendale, Ohio, Private Communication (1990).

  326. D. P. DeLuca andB. A. Cowles, WRDC-TR-89-4136 (WPAFB, Ohio, 1989).

    Google Scholar 

  327. J. Lincoln, in 14th Symposium of International Committee on Aeronautical Fatigue, edited by D. L. Simpson (Engineering Materials Advisory Services, Warley, W. Midlands, UK, 1987) p. 619.

    Google Scholar 

  328. H. A. Lipsitt, in “Advanced High Temperature Alloys: Processing and Properties”, edited by S. S. Allen, R. M. Pelloux and R. Widmer (ASM, Metals Park, Ohio, 1986) p. 157.

    Google Scholar 

  329. E. K. Hoffman, R. K. Bird andT. T. Bales, in “Light-Weight Alloys for Aerospace Applications”, edited by E. H. Chia and N. J. Kim (TMS-AIME, Warrendale, Pennsylvania, 1989) p. 481.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institute for Materials and Advanced Processes, College of Mines and Earth Resources, University of Idaho, 83843-4195, Moscow, Idaho, USA

    F. H. Froes, C. Suryanarayana & D. Eliezer

Authors
  1. F. H. Froes
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. C. Suryanarayana
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. D. Eliezer
    View author publications

    You can also search for this author in PubMed Google Scholar

Additional information

On leave from Ben Gurion University of the Negev, Beer Sheva, Israel.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Froes, F.H., Suryanarayana, C. & Eliezer, D. Synthesis, properties and applications of titanium aluminides. J Mater Sci 27, 5113–5140 (1992). https://doi.org/10.1007/BF02403806

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02403806

Keywords

Search

Navigation