Abstract
Elemental powders of Al, Zn, Mg, and Cu (corresponding to the composition of 7010 aluminium alloy) were milled in a high-energy attritor with and without additions of SiC particulates. The microstructural changes taking place in the milled powders (which eventually lead to mechanical alloying) are found to be retarded by SiC additions. High-resolution techniques such as electron probe microanalysis (EPMA) and transmission electron microscopy/energy-dispersive X-ray analysis (TEM/EDX) revealed the presence of localized solute-rich regions long after the diffraction line from these solutes had ceased to appear in the X-ray diffractograms. Zinc appears to be more difficult to be mechanically alloyed into aluminum than either Cu or Mg in spite of its comparatively larger diffusivity in aluminum.
Similar content being viewed by others
References
J.S. Benjamin:Metall. Trans., 1970, vol. 1, pp. 2943–51.
P.S. Gilman and J.S. Benjamin:Ann. Rev. Mater. Sci., 1983, vol. 13, pp. 279–300.
J.S. Benjamin and R.D. Schellang:Metall. Trans. A, 1981, vol. 12A, pp. 1827–32.
M.J. Fleetwood:Mater. Sci. Technol., 1986, vol. 2, pp. 1176–82.
R. Sundaresan and F.H. Froes:New Materials by Mechanical Alloying Techniques, E. Artz and L. Schultz, eds., Deutsches Gesellschaft fur Metallkunde, Oberusel, Germany, 1989, pp. 243–62.
G. Jangg, F. Kutner, and G. Korb:Aluminum, 1975, vol. 51, p. 641.
P.K. Mirchandani and R.C. Benn: inSpace Age Metals Technology, F.H. Froes and R.H. Cull, eds., Society for the Advancement of Material and Process Engineering (SAMPE), Covina, CA, 1988, pp. 188–201.
C.C. Koch:Ann. Rev. Mater. Sci., 1989, pp. 121–43.
A.D. Jatkar, R.D. Schellang, and S.J. Donachie:Metal Matrix, Carbon and Ceramic Matrix Composites, NASA CP 2406, J.D. Buckley, ed., NASA, Washington, DC, 1985, p. 119.
A.N. Tiwari, V. Gopinathan, and P. Ramakrishnan:Mater. Manufacturing Processes, 1991, vol. 6 (4), pp. 621–33.
A. Bhaduri, V. Gopinathan, P. Ramakrishnan, G. Ede, and A.P. Miodownik:Scripta Metall. Mater., 1993, vol. 28, pp. 907–12.
A. Bhaduri: Ph.D. Thesis, IIT, Bombay, India, 1995, pp. 39–42.
G.K. Williamson and W.H. Hall:Acta Metall., 1953, vol. 1, pp. 22–31.
B.D. Cullity:Elements of X-ray Diffraction, Addison-Wesley, Reading, MA, 1969, pp. 259–96.
J.S. Benjamin and T.E. Volin:Metall. Trans., 1974, vol. 5, pp. 1929–34.
B.J.M. Aikin and T.H. Courtney:Metall. Trans. A, 1993, vol. 24A, pp. 647–57.
C.C. Koch:Materials Science and Technology—A Comprehensive Treatment, R.W. Cahn, ed., VCH, Weinheim, Germany, 1991, pp. 193–245.
J. Kaneko, M. Sugamata, and S.G. Lim:Structural Applications of Mechanical Alloying, F.H. Froes and J.J. deBarbadillo, eds., ASM, Materials Park, OH, 1990, pp. 229–35.
C.S. Barrett and T.B. Massalski:Structure of Metals, 3rd revised edition, Permagon International Library, International Series on Material Science and Technology, Pergamon Press, New York, 1980, vol. 35, pp. 541–67.
John W. Yardy: Master’s Thesis, University of Surrey, Guildford, United Kingdom, 1967, pp. 48–63.
A. Benghalem and D.G. Morris:Acta Metall. Mater., 1994, vol. 42 (12), pp. 4071–81.
Colin J. Smithells:Metals Reference Book, Butterworth Scientific Publication, London, 1955, pp. 13–14.
Binary Alloy Phase Diagrams, T.B. Massalski, ed., ASM Materials Park, OH, 1987, vol. 1, pp. 106, 130, and 185.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bhaduri, A., Gopinathan, V., Ramakrishnan, P. et al. Microstructural changes in a mechanically alloyed Al-6.2Zn-2.5Mg-1.7Cu alloy (7010) with and without particulate SiC reinforcement. Metall Mater Trans A 27, 3718–3726 (1996). https://doi.org/10.1007/BF02595463
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02595463