Abstract
Rate of cooling from the solution treatment temperature has a pronounced effect on corrosion behavior and mechanical properties of precipitation-hardenable aluminum alloys. This effect is attributed to loss of vacancies and to precipitation of solute during the quench. Analysis of data for aluminum alloys indicates that precipitation rate is an explicit function of temperature and the amount of solute remaining in solution; consequently, precipitation during cooling is additive and can be evaluated by integrating this function. A method is presented whereby type of corrosion attack or mechanical properties can be accurately predicted from the cooling curve and a C-curve for the alloy. Because the actual cooling curve is considered, the method is applicable regardless of the complexity of the cooling conditions. Also presented is an improved method of accurately determining C-curves using either interrupted or continuous quenching techniques. C-curves describing type of corrosion attack in 2024-T4 sheet and loss in mechanical properties of 7075-T6 sheet are presented.
Similar content being viewed by others
References
W. L. Fink and L. A. Willey:Trans. AIME, 1948, vol. 175, pp. 414–27.
H. Y. Hunsicker:Aluminum, K. R. Van Horn, ed., pp. 140–42, American Society for Metals, Metals Park, Ohio, 1967.
J. W. Cahn:ActaMet., 1956, vol. 4, pp. 449–57.
J. W. Cahn:Acta Met., 1956, vol. 4, pp. 572–75.
R. B. McAlevy: “Interrupted Quenching and Isothermal Treatment of Aluminum Alloy 2024,” M.S. Thesis, Pennsylvania State University, June 1965.
J. E. Vruggink: Alcoa Laboratories, unpublished work.
J. W. Evancho: Alcoa Laboratories, unpublished work.
J. T. Staley and J. W. Evancho: U.S. Naval Air Systems Command Contract N00019-72-C0146, November 7, 1972.
M. Conserva, E. Di Russo, and O. Caloni:Met. Trans., 1971, vol. 2, pp. 1227–32.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Evancho, J.W., Staley, J.T. Kinetics of precipitation in aluminum alloys during continuous cooling. Metall Trans 5, 43–47 (1974). https://doi.org/10.1007/BF02642924
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02642924