Abstract
An interesting mechanical property of SiC/Al composites is that the tensile yield stress is less than the compressive yield stress, even though the apparent modulus in tension is greater than that in compression. An investigation was undertaken to determine if the Bauschinger effect (BE) in a SiC/Al composite is asymmetrical. It was found that the BE is indeed asymmetrical in the case of the composite and the magnitude of the BE increases with total forward strain. These results can be explained in terms of the changes in “back stress” caused by the changes in the residual stress and the work hardening during forward strain.
Similar content being viewed by others
References
N.F. Mott:Phil. Mag., 1952, vol. 43(346), pp. 1151–78.
A. Seeger: inDislocations and Mechanical Properties of Crystals, J.C. Fisher, W.G. Johnston, R. Thomson, and T. Vreeland, Jr., eds., John Wiley and Sons, New York, NY, 1957, pp. 243–329.
A. Seeger, J. Diehl, S. Mader, and H. Rebstock:Phil. Mag., 1958, vol. 2, pp. 323–50.
E. Orowan:Internal Stress and Fatigue of Metals, Elsevier, Amsterdam, 1960, p. 240.
J.D. Atkinson, L.M. Brow, and W.M. Stobbs:Phil. Mag., 1974, vol. 30, pp. 1247–280.
B.J. Brindley and P.T. Worthington:Metall. Rev., 1970, vol. 15, p. 101.
D.H. Avery and W.A. Backofen:Trans. TMS-AIME, 1963, vol. 227, pp. 835–38.
O.B. Pederson, L.M. Brown, and W.M. Stobbs:Acta Metall., 1981, vol. 29, pp. 1843–50.
M.G. Stout and A.D. Rollet:Metall. Trans. A, 1990, vol. 21A, pp. 3201–13.
R. Hsu and R.J. Arsenault:Mater. Sci. Eng., 1984, vol. 66, pp. 35–45.
Hu.C. Wei, H. Margolin, and S. Wourbakhsh:Scripta Metall. Mater., 1992, vol. 27, pp. 865–70.
J.D. Eshelby:Proc. R. Soc., 1957, vol. A241, p. 376.
P.S. Bate and D.V. Wilson:Acta Metall., 1986, vol. 34, pp. 1097–1105.
Z. Li and H. Gu:Metall. Trans. A, 1990, vol. 21A, pp. 717–24.
R.J. Arsenault and S.B. Wu:Mater. Sci. Eng., 1987, vol. 96, pp. 77–88.
N. Shi and R.J. Arsenault:J. Comp. Technol. Res., 1991, vol. 13, pp. 211–26.
J. Llorca, A. Needleman, and S. Suresh:Scripta Metall. Mater., 1990, vol. 24, pp. 1203–08.
M. Taya, K.E. Lulay, K. Wakashima, and D. Lloyd:Mater. Sci. Eng., 1990, vol. A124, pp. 103–11.
P.J. Withers, W.M. Stobbs, and O.B. Pedersen:Acta Metall., 1989, vol. 37, pp. 3061–84.
N. Shi and R.J. Arsenault:Metall. Trans. A, 1993, vol. 24A, pp. 1879–82.
N. Shi, R.J. Arsenault, A.D. Krawitz, and L.F. Smith:Metall. Trans., 1993, vol. 24A, pp. 187–96.
R.J. Arsenault and R.M. Fisher:Scripta Metall., 1983, vol. 17, pp. 67–71.
R.J. Arsenault, L. Wang, and C.R. Feng:Acta Metall., 1991, vol. 39, pp. 47–57.
M. Vogelsang, R.J. Arsenault, and R.M. Fisher:Metall. Trans. A, 1986, vol. 17A, pp. 379–89.
R.J. Arsenault, N. Shi, C.R. Feng, and L. Wang:Mater. Sci. Eng., 1991, vol. A131,pp. 55–68.
R.J. Arsenault:Mater. Sci. Eng., 1984, vol. 64, pp. 171–81.
R.J. Arsenault and M. Taya:Acta Metall., 1987, vol. 35, pp. 651–59.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Arsenault, R.J., Pillai, U.T.S. The bauschinger effect in a SiC/Al composite. Metall Mater Trans A 27, 995–1001 (1996). https://doi.org/10.1007/BF02649767
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02649767