Abstract
The feasibility of printed circuit board assembly with lead-free solder alloys was investigated. Studies were conducted with two baseline eutectic binary alloys, SnBi and SnAg, and three new lead-free solder formulations: (1) 91.8Sn-4.8Bi-3.4Ag (wt%) developed at Sandia Laboratories, (2) 77.2Sn-20In-2.8Ag developed at Indium Corp. of America, and (3) 96.2Sn-2.5Ag-0.8Cu-0.5Sb provided by AIM Inc. The basic physical properties (melting temperature, wetting, mechanical strength) pertinent to each of the newly developed alloys are described. The feasibility of 0.4 mm pitch assembly was established with each of the lead-free solder alloys investigated, although the processing windows were generally found to be narrower. All solder joints exhibited good fillets, in accordance with the workmanship standards. Wetting of the lead-free solders was significantly improved on immersion tin vs imidazole finished circuit boards. The laminates did not suffer thermal degradation effects, such as warpage, delamination, or severe discoloration (reflow was performed under an inert atmosphere). It is thus concluded that the manufacturability performance of the new solder formulations is adequate for surface mount applications.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
K.R. Stone et al.Brazing and Soldering 4, 20 (1983).
J. Marshall and S. Walter,The Intl. J. for Hybrid Microelec- tronics 10(1), 11(1987).
H.D. Solomon,J. Electron. Packaging 113, 102 (1991).
J. London and D.W. Ashall,Brazing and Soldering 10, 17 (1986).
M. Harada and R. Satoh,IEEE Transactions in CHME 13(4), 736 (1990).
B. Masson and B.K. Kirkpatrick,J. Electron. Mater. 15 (6), 349(1986).
J. London and D.W. Ashall,Brazing and Soldering 11, 49 (1986).
A.D. Romig, F.G. Yost and P.F. Hlava,Microbeam Analysis, ed. A.D. Roming and J. Goldstein (San Francisco Press, 1984), p. 87.
Z. Mei and J.W. Morris,J. Electron. Mater. 21 (6), 599 (1992).
G. Humpston and D.M. Jacobson,GEC J. Research 8 (3), 145 (1991).
R.N. Wild,Some Fatigue Properties of Solders and Solder Joints, IBM Report No. 732Z000421 (1973).
H.E. Gudul and R.R. Carlson,Electronic Packaging and Production (9) 29 (1992).
J. Ferriter and S.P. Redmond,Materials Engineering (8) 7 (1992).
J.R. Getten and R.C. Senger,IBM J.Res.Develop. 26(3),379 (1982).
H. Getty,IPC Technical Review (1991), p. 14.
L. Morrison,Electronic Production 16 (5), 33 (1987).
S. Smernos and R. Strauss,Electrical Communication 57(2), 148 (1982).
C. Melton, A. Skipor and J. Thome,Intl. Flux Conference Proc, Atlanta, (1992), p. 1007.
P. Vianco,Proc. Metal Science of Joint Symp., TMS Fall Meeting, 1991.
P. Vianco, F. Hosking and J. Rejent,Weld J. 69,230-s(1990).
C.A. MacKay and W.D. vonVoss,Materials Sci. andTechn. 1, 240 (1985).
P. Vianco and J. Dal Porto,New Technologies in Electronic Packaging ed. B. Livesay and M. Nagarkar, (Materials Park, OH: ASM International, 1991), p 25.
I. Artaki, U. Ray, P. Vianco, H. Gordon and A. Jackson,Surface Mount Intl. Proc. (1993).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Artaki, I., Jackson, A.M. & Vianco, P.T. Evaluation of Lead- Free Solder Joints in Electronic Assemblies. J. Electron. Mater. 23, 757–764 (1994). https://doi.org/10.1007/BF02651370
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02651370