Abstract
The structural changes occurring during warm working of Cd-1.5 pct Zn alloy and their effect on the subsequent mechanical properties are studied. It is observed that changes in grain size and preferred orientation are important to a large extent in controlling the mechanical strength. The Hall-Petch slope,R decreases in the warm worked material while the friction stress, σo increases. The lowerR values are attributed to the development of a {10-1t} texture and the higher σo values are interpreted on the basis of changes in the basal texture.
Similar content being viewed by others
References
I. L. Dillamore:Recrystallization of Metallic Materials, Frank Haessner, ed., p. 289, Stuttgart, 1971.
J. J. Irani and D. J. Lathem: ISI Special Report No. 114, p. 55, The Iron and Steel Institute, London, 1969.
C. M. Young, B. Walser, E. P. Abrahamson, and 0. D. Sherby:Scr. Met., 1975, vol. 9, p. 35.
O. D. Sherby, M. J. Harringan, L. Chamagne, and C. Sauve:Trans. ASM, 1969, vol. 62, p. 575.
C. M. Young and O. D. Sherby:JISl, 1973, vol. 211, p. 640.
E. DiRusso, M. Conserva, M. Buratti, and F. Gatto:Mater. Sci. Eng., 1974, vol. 14, p. 23.
I. Gokyo and T. Kishi:Trans. Jap. Inst. Metals, Suppl., 1968, vol. 9, p. 177.
Shu-en Hsu, G. R. Edwards, J. C. Shyne, and O. D. Sherby:J. Mater. Sci., 1977,vol. 12,p. 131.
W. J. McG. Tegart:J. Inst. Metals, 1962-63, vol. 91, p. 99.
N. R. Risebrough and E. Teghtsoonian:Can. J. Phys., 1967, vol. 45, p. 591.
S. L. Mannan and P. Rodriguez:Acta Met., 1975, vol. 21, p. 221.
Y. V. R. K. Prasad, D. H. Sastry, and K. I. Vasu:J. Indian Inst. Sci., 1969, vol. 51, p. 377.
J.G. Schulz:J. Appl. Phys., 1949, vol. 20, p. 1030.
P. Gay and A. Kelly:Acta Crystall., 1953, vol. 6, p. 172.
M. Deighton and R. N. Parkins:Trans. TMS-AIME, 1969, vol. 245, p. 1917.
R.W. Armstrong:Acta Met., 1968, vol. 16, p. 347.
D. V. Wilson and B. Russell:Acta Met., 1960, vol. 8, p. 36.
Y. V. R. K. Prasad, N. M. Madhava, and R. W. Armstrong:Grain Boundaries in Eng. Materials, J. L. Walter, J. H. Westbrook, and D. A. Woodford, eds., p. 67, Proc. 4th Bolton Landing Conference, Lake George, N.Y., 1974.
R. E. Reed-Hill:The Inhomogenity of Plastic Deformation, p. 285, Seminar of ASM, Metals Park, Ohio, 1973.
D. V. Wilson and J. A. Chapman:Phil. Mag., 1963, vol. 8, p. 1543.
D. G. Westlake:Deformation Twinning, R. E. Reed-Hill, J. P. Hirth, and H. C. Rogers, eds., vol. 25, p. 29, Gordon and Breach, New York, 1964.
D. L. Bly, 0. D. Sherby, C. M. Young, and Y. Mishchenkov:Mater. Sci. Eng., 1973, vol. 12, p.41.
J. Weertman:Trans. ASM, 1968, vol. 61, p. 681.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yegneswaran, A.H., Prasad, Y.V.R.K. & Raman, K.S. Effect of grain size and texture on the mechanical properties of warm worked cadmium-1.5 Pct zinc alloy. Metall Trans A 9, 1311–1316 (1978). https://doi.org/10.1007/BF02652255
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02652255