Abstract
While many investigators have examined electromagnetic and magnetohydrodynamics phenomena in electromagnetic casting (EMC) of aluminum, there appears to be no published work on heat transport and solidification in such casters. This two-part series is an attempt to remedy this deficiency. The first part describes two experimental campaigns, carried out on a pilot-scale electromagnetic caster at Reynolds Metals Company, in which sacrificial thermocouples were used to obtain many data on temperature distributions within the aluminum of a pilot-scale caster and thereby to obtain the shape of the liquid metal pool (“sump”). The data reveal a strong dependence of temperature distribution and sump depth on casting speed but a relatively weak dependence on the flow rate of the quenching water striking the outside of the ingot.
Similar content being viewed by others
References
Z.N. Getselev and G.I. Martynov:Magnetohydrodynamics, Plenum Publishing Corp., New York, NY, 1976, Mar., pp. 454–60.
Z.N. Getselev and G.I. Martynov:Magnetohydrodynamics, Plenum Publishing Corp., New York, NY, 1976, July, pp. 217–24.
Z.N. Getselev, D.A. Kreindel, A.A. Kaptilkin, and G.I. Martynov:Magnetohydrodynamics, Plenum Publishing Corp., New York, NY, 1976, July, pp. 252–54.
Z.N. Getselev, G.V. Telyakov, P.M. Bogdashkin, V.M. Persikov, and G.I. Martynov:Magnetohydrodynamics, Plenum Publishing Corp., New York, NY, 1976, Sept., pp. 373–76.
Z.N. Getselev and G.I. Martynov:Magnetohydrodynamics, Plenum Publishing Corp., New York, NY, 1977, Sept. pp. 72–78.
Z.N. Getselev and G.I. Martynov:Magnetohydrodynamics, Plenum Publishing Corp., New York, NY, 1978, Dec., pp. 247–51.
Z.N. Getselev and G.I. Martynov:Magnetohydrodynamics, Plenum Publishing Corp., New York, NY, 1979, July, pp. 80–86.
J.D. Lavers:IEEE-IAS Conf. Proc., San Francisco, CA, 1982, pp. 954–60.
J.D. Lavers and M.R. Ahmed:Casting of Near Net Shape Products, TMS, Warrendale, PA, 1988, pp. 395–410.
C. Vivès and R. Ricou:Metall. Trans. B, 1985, vol. 16B, pp. 377–84.
J.L. Meyer, J. Szekely, N. El-Kaddah, C. Vivès, and R. Ricou:Metall. Trans. B, 1987, vol. 18B, pp. 539–48.
J. Sakane, B.Q. Li, and J.W. Evans:Metall. Trans. B, 1988, vol. 19B, pp. 397–408.
S.A. Shercliff:Proc. R. Soc. London A, 1981, vol. 375, pp. 455–73.
T. Breville, R. de Framond, J. Vijeon, and P. Masse:IEEE Trans. Mag., 1985, vol. Mag-21 (4), pp. 1862–64.
B.Q. Li and J.W. Evans:IEEE Trans. Mag., 1989, vol. 25, pp. 4443–48.
B.Q. Li and J.W. Evans:IEEE Trans. Mag., 1989, vol. 25, pp. 4449–53.
B.Q. Li, J.W. Evans, and D.P. Cook:Metall. Trans. B, 1991, vol. 22B, pp. 121–34.
D.P. Cook and J.W. Evans: inLight Metals '91, TMS, Warrendale, PA, pp. 915–19.
D.P. Cook and J.W. Evans:Metall. Mater. Trans. B, 1995, vol. 26B, pp. 1263–70.
D.P. Cook, S. Nishioka, and J.W. Evans:Metall. Mater. Trans. B, 1995, vol. 26B, pp. 1271–80.
C. Vivès:Metall. Trans. B, 1989, vol. 20B, pp. 623–29.
C. Vivès:Metall. Trans. B, 1989, vol. 20B, pp. 631–43.
D.P. Cook, J.W. Evans, and J. Grandfield: inMagnetohydrodynamics in Process Metallurgy, J. Szekely, J.W. Evans, K. Blazek, and N. El-Kaddah, eds., TMS, Warrendale, PA, 1991, pp. 145–49.
D.C. Weckman and P. Niessen:Metall. Trans. B, 1982, vol. 13B, pp. 593–602.
D.C. Prasso, J.W. Evans, and I.J. Wilson: inLight Metals 1994, U. Mannweiler, ed., TMS, Warrendale, PA, 1994, pp. 871–77.
D.C. Prasso: Master's Thesis, University of California, Berkeley, CA, 1993.
J. Rappaz and R. Touzani: inMagnetohydrodynamics in Process Metallurgy, J. Szekely, J.W. Evans, K. Blazek, and N. El-Kaddah, eds., TMS, Warrendale, PA, 1991, pp. 181–85.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Prasso, D.C., Evans, J.W. & Wilson, I.J. Heat transport and solidification in the electromagnetic casting of aluminum alloys: Part I. Experimental measurements on a pilot-scale caster. Metall Mater Trans B 26, 1243–1251 (1995). https://doi.org/10.1007/BF02654009
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02654009