References
W. J. M. Rankine: Institution of Civil Engineers (British), Minutes of Proceed- ings, vol. 3, p. 105, 1843.
C. Hood:ibid, vol. 2, p. 180, 1842.
A. Wöhler:Z. Bauw., 1858, vol. 8, p. 642;ibid, 1860, vol. 10, p. 583;ibid, 1863, vol. 13, p.233;ibid., 1866, vol. 16, p. 67;ibid., 1870, vol. 20, p. 74.
A. Wöhler (translated and edited anonymously):Engineering, 1867, vol. 4, p. 160; ibid., 1871, vol. 11, pp. 199, 221, 243, 261, 299, 327, 397, and 439.
W. Fairbairn:Phil. Trans. Roy. Soc., 1864, vol. 154, p. 211.
J. A. Ewing and J. C. W. Humfrey:Phil. Trans. Roy. Soc., 1903, vol. 200, p. 241.
M. S. Hunter and W. G. Fricke:Proc. ASTM, 1954, vol. 54, p. 717.
C. Y. Kung and M. E. Fine:Met. Trans. A, 1979, vol. 10A, p. 603.
D. K. Bullens and the Staff of Battelle Memorial Institute:Steel and Its Heat Treatment, Vol. I, 4th ed., p. 37, John Wiley & Sons Inc., New York, 1938.
R. L. Templin:ASM Handbook, 1939 Edition, ASM, Cleveland, OH, p. 143.
Neville Shute Norway:No Highway, p. 7, William Heinemann Ltd., London, 1948.
A. H. Cottrell and D. Hull:Proc. Roy. Soc., 1957, vol. A242, p. 211.
C. Laird and D. J. Duquette: “Mechanisms of Fatigue Crack Nucleation” inCorrosion Fatigue, NACE-2, Houston, TX, p. 88.
P. Lukas, M. Klesnil, and J. Krejci:Phys. Stat. Sol., 1968, vol. 27, p. 545.
P. Neumann:Acta Met., 1969, vol. 17, p. 1219.
N. Thompson, N. J. Wadsworth, and N. Louat:Phil. Mag., 1956, vol. 1, p. 113.
P. J. Woods:Phil. Mag., 1973, vol. 28, p. 155.
J. M. Finney and C. Laird:Phil. Mag., 1975, vol. 31, p. 339.
P. Lukas and M. Klesnil:Phys. Stat. Sol., 1970, vol. 37, p. 833.
D. Kuhlmann-Wilsdorf and C. Laird:Mater. Sci. Eng., 1977, vol. 27, p. 137.
C. Laird: “Fatigue Resistance”, Chap. VIinAlloy and Microstructural Design, Academic Press, New York, 1976.
C. Laird:General Cyclic Stress Strain Response in Al Alloys, ASTM STP, 1977, vol. 637, p. 31.
C. Calabrese and C. Laird:Mater. Sci. Eng., 1974, vol. 13, p. 141;ibid., 1974, vol. 13, p. 159;Met. Trans., 1974, vol. 5, p. 1785.
M. E. Fine and J. S. Santner:Scr. Met., 1975, vol. 9, p. 1239.
P. N. Thielen, M. E. Fine, and R. A. Fournelle:Acta Met., 1976, vol. 24, p. 1.
R. A. Fournelle, E. A. Grey, and M. E. Fine:Met. Trans. A, 1976, vol. 7A, p. 669.
M. E. Fine and R. O. Ritchie:Fatigue and Microstructure, 1978 ASM Materials Science Seminar, St. Louis, MO, ASM, 1979, p. 245.
Y. H. Kim: Ph.D. Thesis, Northwestern University, Evanston, IL, 1979.
W. L. Morris and M. R. James:Met. Trans., in press.
R. Chang, W. L. Morris, and O. Buck:Scr. Met., 1979, vol. 13, p. 191.
N. M. A. Eid and P. F. Thomason:Acta Met., 1979, vol. 27, p. 1239.
S. Hirose and M. E. Fine: Northwestern University, Evanston, IL, unpublished research, 1979.
E. Hornbogen and G. Lütjering: Proc. 6th Int. Conf. on Light Metals, Loeben/ Vienna, Austria, p. 40, Aluminum-Verlag, Düsseldorf, 1975.
G. Lütjering, H. Döker, and D. Munz: Proc. 3rd Int. Conf. on Strength of Metals and Alloys, Cambridge, England, 1973, p. 427.
E. A. Starke, Jr. and G. Lütjering:Fatigue and Microstructure, 1978, ASM Materials Science Seminar, St. Louis, MO, ASM, 1979, p. 205.
F. Ostermann, W. H. Reimann, and A. W. Brisbane: AFML, Dayton, OH. Reviewed in G. Lütjering and A. Gysler paper, 1 st Int. Symposium on Aluminum, Argentina, 1978. To be published by ASM.
M. E. Fine: “Thresholds for Fatigue Failure,” Fall Meeting of Japan Institute of Metals, October 16–18, 1979, Nagoya, Japan.
P. J. E. Forsythe:The Physical Basis of Metal Fatigue, Blackie, London, 1969.
P. C. Paris: Proc. 10th Sagamore Army Materials Research Conf., p. 107, Syracuse Univ. Press, NY, 1964.
A. J. McEvily: inThe Microstructure and Design of Alloys, Vol. 2, Proc. 3rd Int. Conf. on the Strength of Metals and Alloys, Cambridge, England, August 20–25, 1973.
Y. Izumi and M. E. Fine:Eng. Fract. Mech., 1979, vol. 11, p. 791.
R. O. Ritchie: “Near-Threshold Fatigue Crack Propagation in Steels”, M.I.T. Fatigue and Plasticity Lab. Rept. No. FPL/R/79/1020A. Int. Metals Review, in press.
J. Masounave and J. P. Bailon:Scr. Met., 1976, vol. 10, p. 165.
R. O. Ritchie:J. Eng. Mat. and Tech., Trans. ASME, Ser. H, 1977, vol. 99, p. 195.
H. Suzuki and A. J. McEvily:Met. Trans. A, 1979, vol. 10A, p. 475.
J. Weertman:Fatigue and Micmstructure, 1978 ASM Materials Science Semi- nar, St. Louis, MO, ASM, 1979, p. 279.
T. Mura and C. T. Lin:Int. J. Fract, 1974, vol. 10, p. 284.
N. E. Frost, K. J. Marsh, and L. P. Pook:Metal Fatigue, p. 212, Clarendon Press, Oxford, England, 1974.
S. Ikeda, Y. Izumi, and M. E. Fine:Eng. Fract. Mech., 1977, vol. 9, p. 123.
S. I. Kwun and M. E. Fine: Northwestern University, Evanston, IL, unpublished research, 1979.
P. K. Liaw, M. E. Fine, and D. L. Davidson: “Comparison of Plastic Work of Fatigue Crack Propagation in Low Carbon Steel Measured by Strain Gages and Electron Channeling”. Fatigue of Engineering Materials and Structures, in press.
J. R. Rice: ASTM STP, 1967, vol. 415, p. 247.
D. L. Davidson and J. Lankford, Jr.: “Determination of the Energy of Fatigue Crack Propagation and Its Alteration by Wet Air”, Proc. Symposium Environ- ment Sensitive Fracture of Engineering Materials”, TMS-AIME, 1977, in press.
S. I. Kwun: Ph.D. Thesis, Marquette University, Milwaukee, WI, 1978.
S. Ikeda, T. Sakai, and M. E. Fine:J. Mater. Sci., 1977, vol. 12, p. 675.
P. K. Liaw and M. E. Fine: Northwestern University, Evanston, IL, un- published research, 1979.
P. K. Liaw, S. 1. Kwun, and M. E. Fine: Northwestern University, Evanston, IL, unpublished research, 1979.
T. Mura and C. Villman:J. Appl. Mech. of ASME, Paper No. 79-WA-APM-26, 1979; C. Villman: Ph.D. Thesis, Northwestern University, Evanston, IL, 1979.
S. T. Rolfe and J. M. Barsom:Fracture and Fatigue Control in Structures, N. M. Newmark and W. J. Hall, eds., Prentice-Hall Inc., Englewood Cliffs, NJ, 1977.
Rights and permissions
About this article
Cite this article
Fine, M.E. Fatigue resistance of metals. Metall Trans A 11, 365–379 (1980). https://doi.org/10.1007/BF02654560
Issue Date:
DOI: https://doi.org/10.1007/BF02654560