Skip to main content
Log in

Effects of annealing conditions on the properties of tantalum oxide films on silicon substrates

  • Published:
Journal of Electronic Materials Aims and scope Submit manuscript

Abstract

The formation of a SiO2 layer at the Ta2O5/Si interface is observed by annealing in dry O2 or N2 and the thickness of this layer increases with an increase in annealing temperature. Leakage current of thin (less than 40 nm thick) Ta2O5 films decreases as the annealing temperature increases when annealed in dry O2 or N2. The dielectric constant vs annealing temperature curve shows a maximum peak at 750 or 800° C resulting from the crystallization of Ta2O5. The effect is larger in thicker Ta2O5 films. But the dielectric constant decreases when annealed at higher temperature due to the formation and growth of a SiO2 layer at the interface. The flat band voltage and gate voltage instability as a function of annealing temperature can be explained in terms of the growth of interfacial SiO2. The electrical properties of Ta2O5 as a function of annealing conditions do not depend on the fabrication method of Ta2O5 but strongly depend on the thickness of Ta2O5 layer.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. M. M. Hukovic and M. C. Ceric, Thin Solid Films.39, 145 (1986).

    Google Scholar 

  2. G. S. Oehrein and A. Reisman, J. Appl. Phys.54, 6502 (1983).

    Article  Google Scholar 

  3. S. Roberts, J. Ryan and L. Nesbit, J. Electrochem. Soc.133, 1405 (1986).

    Article  CAS  Google Scholar 

  4. S. I. Kimura, Y. Nishioka, A. Shintani and K. Mukai, J. Electrochem. Soc.130, 2414 (1983).

    Article  CAS  Google Scholar 

  5. Y. Nishiok, N. Homma, H. Shinriki, K. Mukai, K. Yamaguchi, A. Uchida, K. Higeta and K. Ogiue, IEEE Trans. Electron Devices34, 1957 (1987).

    Google Scholar 

  6. G. S. Oehrien, F. M. d’Heurle and A. Reisman, J. Appl. Phys.53, 3715 (1984).

    Google Scholar 

  7. S. Zaima, T. Furuta and Y. Yasuda, J. Electrochem. Soc.137, 1297 (1990).

    Article  CAS  Google Scholar 

  8. H. Shinriki and M. Nakata, IEEE Trans. Electron Devices38, 455 (1991).

    Article  CAS  Google Scholar 

  9. K. Sayyah, The Physics and Chemistry of SiO2 and Si-SiO2 interface (Plenum press, New York 1988) p. 129.

    Google Scholar 

  10. T. Kato and T. Ito, J. Electrochem. Soc.135, 2586 (1988).

    Article  CAS  Google Scholar 

  11. J. M. Walls, Methods of Surface Analysis (Cambridge University press, New York, 1987) p. 110.

    Google Scholar 

  12. P. Fazan, M. Dutoit, C. Martin and M. Ilegems, Solid-State Electron.30, 829 (1987).

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Park, S.W., Baek, Y.K., Lee, J.Y. et al. Effects of annealing conditions on the properties of tantalum oxide films on silicon substrates. J. Electron. Mater. 21, 635–639 (1992). https://doi.org/10.1007/BF02655432

Download citation

  • Received:

  • Revised:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02655432

Key words

Navigation