Abstract
The solidification sequences in aluminum containing 8 and 16 wt pct iron are described in terms of the formation of metastable and stable primary intermetallic phases. These alloys were studied in the chill-cast and splat-quenched conditions, and marked differences in microstructure due to the different cooling rates were observed. Contrary to previous work, it is proposed that the 50-nm intercellular particles observed in the “zone A” regions of the splat-quenched alloys are primary in nature; this may account, in part, for their remarkable thermal stability.
Similar content being viewed by others
References
V.K. Vasudevan and H.L. Fraser:Mater. Sci. Eng., 1988, vol. 98, pp. 131–36.
Y.C. Chen, M.E. Fine, J.R. Weertman, and R.E. Lewis:Scripta Metall., 1987, vol. 21, pp. 1003–08.
D.J. Skinner, R.L. Bye, D. Raybould, and A.M. Brown:Scripta Metall., 1986, vol. 20, pp. 867–72.
D.J. Skinner, R.L. Bye, D. Raybould, A.M. Brown, and M.S. Zedalis:Processing of Structural Metals by Rapid Solidification, ASM INTERNATIONAL, Metals Park, OH, 1987, pp. 291–95.
M. Zedalis, D. Raybould, D.J. Skinner, and S.K. Das:Processing of Structural Metals by Rapid Solidification, ASM INTERNATIONAL, Metals Park, OH, 1987, pp. 347–54.
P. Tsakiropoulos, R.C. Pratt, H. Jones, J.E. Restall, and R.W. Gardiner:Mater. Sci. Eng., 1988, vol. 98, pp. 143–47.
L.A. Bendersky, M.J. Kaufman, W.J. Boettinger, and F.S. Biancaniello:Mater. Sci. Eng., 1988, vol. 98, pp. 213–16.
L.A. Bendersky, A.J. McAlister, and F.S. Biancaniello:Metall. Trans. A, 1988, vol. 19A, pp. 2893–2900.
R. Ayer, L.M. Angers, R.R. Mueller, J.C. Scanlon, and C.F. Klein:Metall. Trans. A, 1988, vol. 19A, pp. 1645–56.
M.C. Flemings:Solidification Processing, McGraw-Hill, Inc., New York, NY, 1974, pp. 117–20.
Metals Handbook, 9th ed., ASM INTERNATIONAL, Metals Park, OH, 1988, vol. 15, pp. 142-47.
R.M.K. Young and T.W. Clyne:Scripta Metall., vol. 15, 1981, pp. 1211–16.
H. Jones:Mater. Sci. Eng., 1969-70, vol. 5, pp. 1–18.
R.D. Field, J.W. Zindel, and H.L. Fraser:Scripta Metall., 1986, vol. 20, pp. 415–18.
C. Adam: inUndercooled Alloy Phases, E.W. Collings and C.C. Koch, eds., TMS-AIME, Warrendale, PA, 1986, pp. 59–70.
R.D. Field and H.L. Fraser:Mater. Sci. Eng., 1984/85, vol. 68, pp. L17-L21.
T. Rajasekharan and J.A. Sekhar:Scripta Metall., 1986, vol. 20, pp. 235–38.
T. Janssen:Acta Crystallogr., 1986, vol. A42, pp. 261–71.
L.A. Bendersky, F.S. Biancaniello, and R.J. Schaefer:J. Mater. Res., 1987, vol. 2 (4), pp. 427–30.
M. Chandrasekaran, Y.P. Lin, R. Vincent, and G. Staniek:Scripta Metall., 1988, vol. 22, pp. 797–802.
P. Skjerpe:Metall. Trans. A, 1987, vol. 18A, pp. 189–200.
M.J. Kaufman: University of Florida, Gainesville, FL, unpub- lished research, 1989.
M.H. Jacobs, A.G. Doggett, and M.J. Stowell:J. Mater. Sci., 1974, vol. 9, pp. 1631–43.
W.J. Boettinger, L. Bendersky, and J.G. Early:Metall. Trans. A, 1986, vol. 17A, pp. 781–90.
D.R. Nelson:Phys. Rev., 1983, B28, pp. 5515–35.
A.R. Kortan, H.S. Chen, and J.V. Waszczak:J. Mater. Res., 1987, vol. 2 (3), pp. 294–97.
A. Inoue, H. Kimura, and T. Masumoto:J. Mater. Sci., 1987, vol. 22, pp. 2758–68.
V.G. Raynor and G.V. Rivlin:Int. Met. Rev., 1981, no. 3, pp. 133-52.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cotton, J.D., Kaufman, M.J. Microstructural evolution in rapidly solidified Al-Fe alloys: An alternative explanation. Metall Trans A 22, 927–934 (1991). https://doi.org/10.1007/BF02659002
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02659002