Abstract
The effect of interfaces on mechanical properties is considered. Elastic and plastic compatibilities at boundaries are treated. Specific influences at both low and high temperatures are discussed, with emphasis on dislocation mechanisms and the atomic scale structure of boundaries.
References
Z. Jeffries:Trans. Amer. Soc. Steel Treat, 1928, vol. 13, p. 369.
O. C.Zienkiewicz:The Finite Element Method, McGraw-Hill, New York, 1967.
R. B. Pipes and N. J. Pagano:J. Comp. Mater., 1970, vol. 4, p. 538.
K. T. S. T. Iyengar and R S. Alwar:Z. ang. Math. Phys., 1963, vol. 14, p. 344.
T. W. Chou and J. P. Hirth:J. Comp. Mater., 1970, vol. 4, p. 102.
A. Kelly and G. J. Davies:Met. Rev., 1965, vol. 10, p. 1.
R. E. Hook and J.P. Hirth:Acta Met., 1967, vol. 15, p. 535.
R. E. Hook and J. P. Hirth:.Acta Met., 1967, vol. 15, p. 1099.
R. E. Hook and J. P. Hirth:Trans. Japan Inst. Metals, 1968, vol. 9, Suppl, p. 778.
J. C. Suits and B. Chalmers:Acta Met., 1961, vol. 9, p. 854.
W. E. Carrington and D. McLean:Acta Met., 1965,vol. 13,p.493.
J. D. Livingston and B. Chalmers:Acta Met., 1957, vol. 5, p. 322.
J. J. Hauser and B. Chalmers:Acta Met, 1961, vol. 9, p. 802.
G. W. Groves and A. Kelly:Phil. Mag., 1963, vol. 8, p. 877.
U. F. Kocks:Phil Mag., 1964, vol. 10, p. 187.
R. von Mises:Z. ang. Math. Mech., 1928, vol. 8, p. 161.
G. I. Taylor:J. Inst. Metals, 1938, vol. 62, p. 307.
J. P. Hirth and J. Lothe:Theory of Dislocations, pp. 276–84, McGraw-Hill, New York, 1968.
J. S. Koehler:Phys. Rev.: 1941, vol. 60, p. 397.
J. D. Eshelby:Phil. Trans. Roy. Soc, 1951, vol. 244A, p. 87.
A. K. Head:Phil. Mag., 1953, vol. 44, p.92;Proc. Phys. Soc. (London), 1953, vol. 66B,p. 793.
J. P. Hirth and J. Lothe:Theory of Dislocations, pp. 82–85, McGraw-Hill, New York, 1968.
J. Dundurs:Mathematical Theory of Dislocations. T. Mura, ed., p. 70, A.S.M.E., 1969.
A. H. Clauer: Ph. D. Thesis, Ohio State University, 1968; A. H. Clauer, B. A. Wilcox and J. P. Hirth:Acta Met., 1970, vol. 18, p. 381.
F. C. Frank; Report of the Symposium on Plastic Deformation of Crystalline Solids, 1950, Carnegie Institute of Technology, p. 150.
J. C. M. Li:Electron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds., p. 713, Interscience, 1963.
D. G. Brandon:Acta Met., 1966, vol. 14, p. 1479.
W. Bollmann:Phil. Mag., 1967, vol. 16, p. 383.
W. Bollmann:Crystal Defects and Crystalline Interfaces, Springer-Verlag, 1970.
M. L. Kronberg and F. H. Wilson:AIME Trans., 1949, vol. 185, p. 501.
W. T. Read, Jr.:Dislocations in Crystals, McGraw-Hill, 1953.
T. Schober and R. W. Balluffi:Phil. Mag., 1970, vol. 21, p. 109;Phil Mag, 1971, vol. 24, p. 165.
M. F. Ashby:Scripta Met., 1969, vol. 3, p. 843.
G. Bishop and B. Chalmers:Scripta Met., 1968, vol. 2, p. 133;Phil.Mag., 1971, vol. 24, p. 515.
M. Weins, B. Chalmers, H. Gleiter and M. Ashby:ScriptaMet., 1969, vol. 3, p. 601 ; M. J. Weins:Interatomic Potentials and Simulation of Lattice Defects, P. C. Gehlen, J. R. Beeler, Jr. and R. I. Jaffee, eds., p. 695, Plenum, 1972.
R. E. Dahl, Jr., J. R. Beeler, Jr., and R. D. Bourquin:Interatomic Potentials and Simulation of Lattice Defects, P. C. Gehlen, J. R. Beeler, Jr., and R. I. Jaffee, eds., p. 673, Plenum, 1972.
T. Schober and R. W. Balluffi:Phil. Mag., 1971, vol. 24, p. 469.
J. P. Hirth and R. W. Balluffi:Acta Met, 1972, in press.
M. N. Shetty and J. P. Hirth:Met Trans., 1971, vol. 2, p. 297.
M. J. Marcinkowski: inFundamental Aspects of Dislocations Theory, J. A. Simmons, R. deWit and R. Bullough, eds., p. 531, NBS Spec. Publ. 317, 1970.
E. S.P. Das and M. J. Marcinkowski:Acta Met, 1972, vol. 20, p. 199.
W. T. Read:Dislocations in Crystals, p. 174, McGraw-Hill, 1953.
F. R. N. Nabarro:Theory of Crystal Dislocations, p. 165, Oxford Univ. Press, 1967.
P. C. Gehlen, R. G. Hoagland, M. F. Kanninen, and J. P. Hirth:J. Appl. Phys., 1972, in press.
H. Gleiter, E. Hornbogen, and G. Bäro:Acta Met, 1968, vol. 16, p. 1053.
Y. Ishida and M. Henderson Brown:Acta Met, 1967,vol. 15, p. 857.
G. Buzzichelli and A. Mascanzoni:Phil. Mag., 1971, vol. 24, p. 497.
H. G. F. Wilsdorf: inStructure and Properties of Thin Films, p. 156, Wiley, 1959.
J. C. M. Li:Trans. TMS-AIME, 1963, vol. 227, p. 239.
C. W. Price and J. P. Hirth:Mater. Sci. Eng., 1972, vol. 9, p. 15.
N. Brown, cited by J. C. M. Li: inElectron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds., p. 713, Interscience, 1963.
R. E. Hook:Met. Trans., 1970, vol. 1, p. 85.
B. A. Bilby, A. H. Cottrell, and K. H. Swinden:Proc. Roy. Soc. (London), 1963, vol. 272A, p. 304;Proc. Roy. Soc. (London), 1965, vol. 285A, p.23.
K. T. Aust and N. K. Chen:Acta Met, 1954, vol. 2, p. 632.
R. L. Fleischer and B. Chalmers:Trans. TMS-AIME, 1958, vol. 212, p. 265.
C. Elbaum:Trans. TMS-AIME, 1960, vol. 218, p. 444.
R. L. Fleischer and W. A. Backofen:Trans. TMS-AIME, 1960, vol. 218, p. 243.
J. D. Mote and J. E. Dom:Trans. TMS-AIME, 1960, vol. 218, p. 491.
Y. Chuang and H. Margolin: Dept. of Metallurgy and Materials Science, New York University, Bronx, New York, unpublished research.
F.J. Humphries and A. T.Stewart: inProc. of the Int. Conf. on the Structure and Properties of Grain Boundaries and Interfaces, P. Chaudhari and Matthews, eds., vol. 31, p. 389, Surface Science, 1972.
L. M. Brown and W. M. Stobbs:Phil. Mag, 1971, vol. 23, pp. 1185 and p. 1201.
F. J. Humphries and P. B. Hirsch:Proc. Roy. Soc. (London), 1970, vol. A318, pp. 45 and p. 73.
M. F. Ashby:Phil. Mag., 1966, vol. 14, p. 1157; vol. 21, p. 399.
D. A. Jones and J. W. Mitchell:Phil. Mag., 1958, vol. 3, p. 1.
F. J. Humphries: Imperial College, London, private communication, Feb. 1972.
E. O. Hall:Proc. Phys. Soc. (London), 1951, vol. 64B, p. 747.
N.J. Petch:J. Iron Steel Inst, 1953, vol. 174, p. 25 ;Phil. Mag., 1956, vol. 1,p. 866.
R. W. Armstrong, I. Codd, R. M. Douthwaite, and N. J. Petch:Phil. Mag., 1962, vol. 7, p. 45.
R. W. Armstrong:Adv. Mater. Res., 1969, vol. 4, p. 101.
R. W. Armstrong:Met. Trans., 1970, vol. 1, p. 1169.
.U. F. Kocks:Met. Trans., 1970, vol. l,p. 112;Acta Met, 1959, vol. 7, p. 131.
G. Y. Chin and W. L. Mammel:Trans. TMS-AIME, 1969, vol. 245, p. 1211.
W. M. Baldwin:ActaMet., 1958, vol. 6, p. 139.
J. D. Campbell and K. J. Marsh:Phil. Mag., 1962, vol. 7, p. 933.
M. A. Jaswon and M. H. Richman:Appl. Mech. Rev., 1964, vol. 17, p. 857.
L. Bragg:Nature, 1942, vol. 149, p. 511.
J. D. Eshelby, F. C. Frank, and F. R. N. Nabarro:Phil. Mag., 1951, vol. 42, p. 351.
J. P. Hirth and J. Lothe:Theory of Dislocations, pp. 694–718, McGraw-Hill, New York, 1968.
J. R. Rice:Fracture, 1968, vol. 2, p. 191.
J. C. M. Li and Y. T. Chou:Met. Trans., 1970, vol. 1, p. 1145.
P. R. Swann and J. Nutting:J. Inst. Metals, 1961, vol. 50, p. 133.
T.W. Chou:Scripta Met., 1971, vol. 5, p. 165.
P. Gay, P. B. Hirsch and A. Kelly:Acta Cryst, 1954, vol. 7, p. 41.
V. K. Chandhok, A. Kasak, and J. P. Hirth:Trans. ASM, 1966, vol. 59, p. 288.
J. D. Embury and R. M. Fisher:Acta Met., 1966, vol. 14, p. 147.
J. D. Embury, A. S. Keh, and R. M. Fisher:Trans. TMS-AIME, 1966, vol. 236, p. 1252.
M. A. P. Dewey and G. W. Briers:J. Iron Steel Inst., 1966, vol. 204, p. 104.
G. Langford:Met. Trans., 1970, vol. 1, p. 465.
D. J. Abson and J. J. Jonas:Metal Sci. J., 1970, vol. 4, p. 24.
D. J. Boyd and J. D. Embury: in Proceedings of the Fifth International Materials Symposium, Berkeley, California, 1972.
M. J. Marcinkowski and R. M. Fisher: inTrans. TMS-AIME, 1965, vol. 233, p. 293.
H, Conrad: inElectron Microscopy and Strength of Crystals, G. Thomas and J. Washburn, eds., p. 299, Interscience, 1963.
J. D. Embury: inStrengthening Methods in Crystals, A. Kelly and R. B. Nicholson, eds., p. 331, Elsevier, 1971.
M. Schankula, J. D. Embury, and D. J. Lloyd:Proc. 2nd. Int. Conf. on Strength of Metals and Alloys, 1970, ASM, p. 209.
H. Yada and H. Mimura:J. Phys. Soc. Japan, 1968, vol. 24, p. 1269.
H. Conrad, S. Feuerstein, and L. Rice:Mater. Sci. Eng., 1967, vol. 2, p. 157;Trans. Japan. Inst. Metals, 1968, vol. 9, Suppl., p. 481.
C. Crussard:J. Aust. Inst. Metals, 1963, vol. 8, p. 317.
E. E. Underwood: inQuantitative Metallography, R. T. DeHoff and F. N. Rhines, eds., p. 79, McGraw-Hill, 1968.
G. Langford and M. Cohen:Trans. ASM, 1969, vol. 62, p. 623;Met. Trans., 1970, vol. 1, p. 1478.
J. Westbrook: inInterfaces, R. C. Gifkins, ed., p. 283, Butterworths, 1970.
T. Aust and B. Chalmers:Met. Trans., 1970, vol. l, p. 1095.
W. E. Carrington and D. McLean:Acta Met, 1965, vol. 13, p. 493.
P. J. Worthington and E. Smith:Acta Met, 1964, vol. 12, p. 1277.
J. R. Low, Jr.:Trans. TMS-AIME, 1969, vol. 245, p. 2481.
R. W. Armstrong: in Ultrafine-Grain Metals, Syracuse Univ. Press, 1972, p. 1 ;Indian J. Sci. Ind. Res., in press.
F. A. McClintock and A. S. Argon:Mechanical Behavior of Materials, p. 524, Addison-Wesley, 1966.
A Kelly and R. B. Nicholson:Prog. Mater. Sci., 1963, vol. 10, p. 149.
R. W. Balluffi and D. N. Seidman:Phil. Mag., 1968, vol. 17, p. 843; inLattice Defects and Their Interactions, R. R. Hasiguti, ed., p. 911, Gordon and Breach, 1967.
R. W. Balluffi:Phys. Status Solidi, 1969, vol. 31, p. 443.
See for example: J. P. Hirth and J. Lothe:Theory of Dislocations, pp. 564–567, McGraw-Hill, New York, 1968.
J. Weertman:Phil. Mag., 1965, vol. 11, p. 1217;/.Appl. Phys., 1967, vol. 38, p. 4916.
J. Lothe and J. P. Hirth:J. Appl. Phys., 1967, vol. 38, pp. 845 and 4916.
V. K. Lindroos and H. M. Miekk-oja:Phil. Mag., 1967, vol. 16, p. 593.;Phil. Mag., 1968, vol. 17, p. 119.;Phil.Mag., 1969, vol. 20, p. 329.
F. R. N. Nabarro: inStrength of Solids, p. 77, Physical Soc. (London), 1948.
C. Herring:J. Appl. Phys., 1950, vol. 21, p. 437.
F. Garafalo:Fundamentals of Creep and Creep Rupture inMetals, Macmillan, 1965.
O. Sherby and P. Burke:Progr. Mater. Sci., 1968, vol. 13, p. 325.
J. Weertman:Trans. ASM, 1968, vol. 61, p. 681.
W. D. Nix and C. R. Barrett:Acta Met, 1965, vol. 13, p. 1247.
J. Weertman:Acta Met, 1967, vol. 15, p. 1081.
L. Raymond and J. Dorn:Trans. TMS-AIME, 1964, vol. 230, p. 560.
J. P. Hirth and J. Lothe:Can. J. Phys., 1967, vol. 45, p. 809.
P. G. Shewmon:Diffusion in Solids, McGraw-Hill, 1963.
M. F. Ashby, R. Raj, and R. C. Gifkins:ScriptaMet, 1970, vol. 4, p.737.
M. F. Ashby: in .Proc.Int. Conf. on Struct, and Prop, of Grain Boundaries and Interfaces, P. Chaudhari and J. W. Matthews, eds., vol. 31, p. 498, Surface Science, 1972; R. N. Stevens: in Proc.Int. Conf. on Struct and Prop, of Grain Boundaries and Interfaces, P. Chaudhari and J. W. Matthews, eds., vol. 31, p. 543, Surface Science, 1972.
R. Raj and M. F. Ashby:Met. Trans., 1971, vol. 2, p. 1113.
A. K. Mukherjee, J. E. Bird, and J. E. Dorn:Trans. ASM, 1969, vol. 62, p. 155.
W. D. Nix and C. R. Barrett:Trans. ASM, 1968, vol. 61, p. 695.
J. J. Jonas:Acta Met., 1969, vol. 17, p. 397.
P. Haasen:Disc. Faraday Soc., 1964, vol. 38, p. 191.
A. A. Solomon and W. D. Nix:Acta Met, 1970, vol. 18, p. 863.
D. L. Holt and W. A. Backofen:Trans. ASM, 1966, vol. 59, p. 755.
W. A. Backofen, F. J. Azzarto, G. S. Murty, and S. W. Zehr: in Ductility, p. 279, Chapman and Hall, 1967.
R. L. Coble:J. Appl. Phys., 1963, vol. 34, p. 1679.
L. M. Lifshitz:Sov. Phys. JETP, 1963, vol. 17, p. 909.
G. B. Gibbs:Mater. Sci. Eng., 1967–68, vol. 2, p. 269.
D.McLean:J. Inst Metals, 1951, vol. 80, p. 507; 1952, vol. 81, p. 293.
R. W. Armstrong: inDislocation Dynamics, A. R. Rosenfieldet al., eds., p. 293, McGraw-Hill, 1968.
B. A. Wilcox and A. H. Clauer:Acta Met, 1972, vol. 20, p. 743.
J. N. Greenwood, D. R. Miller, and J. W. Suiter:ActaMet, 1954, vol. 2, p. 250.
D. McLean:Grain Boundaries inMetals, Oxford University Press, 1957.
A. W. Mullendore and N. J. Grant: inMechanisms Operative in Metals at Elevated Temperature, Syracuse University Press, 1961.
H. Conrad: inMechanical Behavior of Metals at Elevated Temperature, J. E. Dorn, ed., p. 218, McGraw-Hill, 1961.
R. T. Ratcliffe and G. W. Greenwood:Phil. Mag, 1965, vol. 12, p. 59.
R. P. Skelton:Phil. Mag, 1967, vol. 15, p. 405.
C. Zener: Elasticity and Anelasticity, University of Chicago Press, 1948.
D. McLean: inVacancies and Other Point Defects in Metals and Alloys, p. 159, Inst. of Metals, London, 1958.
R. C. Gifkins:Acta Met., 1956, vol. 4, p. 655.
C. W. Chen and E. S. Machlin:AIME Trans., 1957, vol. 209, p. 829.
E. W. Hart:Acta Met., 1967, vol. 15, p. 1545.
M. J. Stowell, J. L. Robertson, and B. M. Watts:Metal Sci. J, 1969, vol. 3, p. 41.
B. M. Watts and M. J. Stowell:J Mater. Sci., 1971, vol. 6, p. 228.
J. Hedworth and M. J. Stowell:J Mater. Sci., 1971, vol. 6, p. 1061.
R. H. Johnson:Met. Rev., 1970, no. 146.
P. Chaudhari: IBM Res. Rept. 2496, 1969.
H. W. Hayden, S. Floreen, and P. D. Goodell:Met. Trans., 1972, vol. 3, p. 833.
J. H. Van der Merwe:J. Appl. Phys., 1963, vol. 34, pp. 117 and 123.
H. Brooks: inMetal Interfaces, p. 20, ASM, 1952.
J. P. Hirth and J. Lothe:Theory of Dislocations, p. 509, McGraw-Hill, New York, 1968.
K. Shinohara and J. P. Hirth:Phil. Mag., in press, 1972.
J. R. Eifert, D. A. Chatfield, G. W. Powell and J. W. Spretnak:Trans. TMS- AIME, 1968, vol. 242, p. 66.
Z. Jeffries:AIME Trans., 1919, vol. 60, p. 474.
Rights and permissions
About this article
Cite this article
Hirth, J.P. The influence of grain boundaries on mechanical properties. Metall Trans 3, 3047–3067 (1972). https://doi.org/10.1007/BF02661312
Issue Date:
DOI: https://doi.org/10.1007/BF02661312