Abstract
Fluid flow, heat transfer, and inclusion flotation have been modeled mathematically for several types of industrial tundish designs. Computations are presented to illustrate the importance of thermal natural convection currents in mixing the upper and lower layers of steel. The use of flow modification devices was shown to be reasonably effective in further reducing inclusion density levels at the intermediate to larger size ranges. Small inclusions (≦40 μm) were not readily removed with or without flow controls because of their low Stokes rising velocities.
Similar content being viewed by others
References
Y. Maruki, S. Shima, and K. Tanaka:Trans. Iron Steel Inst. Jpn. 1988, vol. 28, pp. 150–68.
S. Joo: Ph. D. Thesis, McGill University, Montreal, 1989.
S. Irshenbaum and Cahill:Trans. AIME, 1962, vol. 224, p. 816.
K.Y.M. Lai, M. Salcudean, S. Tanaka, and R.I.L. Guthrie:Metall. Trans., 1986, vol. 17B, pp. 449–59.
Y. He and Y. Sahai:Metall. Trans., 1987, vol. 18B, pp. 81–92.
K.H. Tacke and J.C. Ludwig:Steel Res., 1987, vol. 58 (6), pp. 262–69.
J.W. Han: Ph.D. Thesis, Seoul National University, Seoul, Korea, 1987.
O.I. Ilegbusi and I. Szekely:Mathematical Modeling of Materials Processing Operations, J. Szekely, L.B. Hales, H. Henein, N. Jarrett, K. Rajamani, and I. Samarsekera, eds., TMS, Warrendale, PA, 1987 pp. 409–29.
R.I.L. Guthrie, S. Joo, and H. Nakajima:Proc. Int. Symp. on Direct Rolling and Hot Charging of Strand Cast Billets, CIM, Montreal, 1988, Pergamon Press, Elmsford, NY, vol. 10, pp. 193–212.
S. Joo, R.I.L. Guthrie, and C.J. Dobson:Steelmaking Conf. Proc, Chicago, ISS-AIME, Warrendale, PA, 1989, vol. 72, pp. 401–08.
I. Simpson, R. Serje, K. Kuit, Z. Tritsiniotis, and D. Porteous:Proc. 3rd Int. Conf. on Clean Steel, Institute of Metals, London, 1987, pp. 85–91.
K. Kuit and I. Simpson: “Performance and Non-Metallic Inclusion Content,” Internal Technical Note, BHP Steel, Melbourne, Australia, July 1988.
Author information
Authors and Affiliations
Additional information
Formerly Doctoral Candidate
Formerly Postdoctoral Fellow, Department of Mining and Metallurgical Engineering, McGill Metals Processing Centre, McGill University.
Macdonald Professor of Metallurgy
Rights and permissions
About this article
Cite this article
Joo, S., Han, J.W. & Guthrie, R.I.L. Inclusion behavior and heat-transfer phenomena in steelmaking tundish operations: Part II. Mathematical model for liquid steel in tundishes. Metall Trans B 24, 767–777 (1993). https://doi.org/10.1007/BF02663137
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02663137