Skip to main content
SpringerLink
Log in

The structure and mechanical properties of metallic nanocrystals

  • Published:
Metallurgical Transactions A Aims and scope Submit manuscript

Abstract

Metallic nanocrystals are ultrafine-grained polycrystalline solids with grain sizes in the range of 1 to 10 nm in at least one dimension. Because of the extremely small dimensions, a large fraction of the atoms in these materials is located at the grain boundaries, and thus, they possess novel, and often improved, properties over those of conventional polycrystalline or glassy materials. In comparison to more conventional materials, nanocrystalline materials show a reduced density; increased thermal expansion, specific heat, and strength; a supermodulus effect; and extremely high diffusion rates. Traditionally brittle materials can be made ductile by nano-structure processing. At present, there is considerabe confusion on the nature of the micro-structure and mechanical properties of the nanocrystalline materials, especially of the equiaxed (three-dimensional, 3-D) type. The present article reviews the current understanding of nanocrystals and evaluates the data available on structure and mechanical properties of nanocrystalline metals.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. H. Gleiter:Prog. Mater. Sci., 1989, vol. 33, pp. 223–315.

    Article  CAS  Google Scholar 

  2. B.H. Kear, L.E. Cross, J.E. Keem, R.W. Siegel, F. Spaepen, K.C. Taylor, E.L. Thomas, and K-N. Tu: NMAB Report 454, National Academy Press, Washington, DC, 1989.

    Google Scholar 

  3. R.W. Siegel:MRS Bull., 1990, vol. 15 (10), pp. 60–67.

    CAS  Google Scholar 

  4. R. Birringer:Mater. Sci. Eng. A, 1989, vol. A117, pp. 33–43.

    Article  CAS  Google Scholar 

  5. F.H. Frees and C. Suryanarayana:JOM (J. Miner. Met. Mater. Soc.), 1989, vol. 41 (6), pp. 12–17.

    Article  Google Scholar 

  6. R.P. Andres, R.S. Averback, W.L. Brown, L.E. Brus, W.A. Goddard III, A. Kaldor, S.G. Louie, M. Moscovite, P.S. Peercy, S.J. Riley, R.W. Siegel, F. Spaepen, and Y. Wang:J. Mater. Res., 1989, vol. 4, pp. 704–36.

    Article  CAS  Google Scholar 

  7. C. Suryanarayana and F.H. Froes: inPhysical Chemistry of Powder Metals Production and Processing, W. Murray Small, ed., TMS, Warrendale, PA, 1989, pp. 279–96.

    Google Scholar 

  8. R.L. Bickerdike, D. Clark, J.N. Easterbrook, G. Hughes, W.N. Mair, P.G. Partridge, and H.C. Ranson:Int. J. Rapid Solidification, 1984-85, vol. 1, pp. 305–25.

    Google Scholar 

  9. B.M. Gallois, R. Mathur, S. Lee, and J.Y. Yoo: inMulticomponent Ultrafine Microstructures, L.E. McCandlish, D.E. Polk, R.W. Siegel, and B.H. Kear, eds., MRS, Pittsburgh, PA, 1989, vol. 132, pp. 49–60.

    Google Scholar 

  10. R.W. Siegel, S. Ramasamy, H. Hahn, Li Zongquan, Lu Ting, and R. Gronsky:J. Mater. Res., 1988, vol. 3, pp. 1367–72.

    Article  CAS  Google Scholar 

  11. J. Karch, R. Birringer, and H. Gleiter:Nature, 1987, vol. 330, pp. 556–58.

    Article  CAS  Google Scholar 

  12. M.J. Mayo, R.W. Siegel, A. Narayanasamy, and W.D. Nix:J. Mater. Res., 1990, vol. 5, pp. 1073–82.

    Article  CAS  Google Scholar 

  13. T. Mütschele and R. Kirchheim:Scripta Metall., 1987, vol. 21, pp. 1101–04.

    Article  Google Scholar 

  14. Y. Waseda:The Structure of Non-Crystalline Materials, McGraw-Hill, New York, NY, 1980.

    Google Scholar 

  15. C. Suryanarayana and F.H. Froes: inMaterials with Ultrafine Microstructures, Proc. Acta Metall. Conf., Atlantic City, NJ, Oct. 1990, in press.

  16. E.L. Jyce, Jr. and T.R. Jervis:Scripta Metall., 1988, vol. 22, pp. 1313–16.

    Article  Google Scholar 

  17. K. Kimoto, Y. Kamiya, M. Nonoyama, and R. Uyeda:Jpn. J. Appl. Phys., 1963, vol. 2, pp. 702–13.

    Article  CAS  Google Scholar 

  18. C.G. Granquist and R.A. Buhrman:J. Appl. Phys., 1976, vol. 47, pp. 2200–19.

    Article  Google Scholar 

  19. D.S. Lashmore and M.P. Dariel: inEncyclopedia of Materials Science and Engineering, R.W. Cahn, ed., Pergamon Press, Oxford, United Kingdom, 1988, suppl. vol. 1, pp. 136–40.

    Google Scholar 

  20. New Materials by Mechanical Alloying Techniques, E. Arzt and L. Schultz, eds., Deutsche Gesellschaft für Metallkunde, Oberursel, Federal Republic of Germany, 1989.

    Google Scholar 

  21. B.A. Joyce:Rep. Prog. Phys., 1985, vol. 48, pp. 1637–97.

    Article  CAS  Google Scholar 

  22. T.R. Anantharaman and C. Suryanarayana:Rapidly Solidified Metals: A Technological Overview, TransTech Publications, Aedermannsdorf, Switzerland, 1987.

    Google Scholar 

  23. Y. Yoshizawa, S. Oguma, and K.J. Yamauchi:J. Appl. Phys., 1988, vol. 64, pp. 6044–46.

    Article  CAS  Google Scholar 

  24. T.R. Jervis and L.R. Newkirk:J. Mater. Res., 1986, vol. 1, pp. 420–24.

    Article  CAS  Google Scholar 

  25. K. Lu, W.D. Wei, and J.T. Wang:Scripta Metall. Mater., 1990, vol. 24, pp. 2319–23.

    Article  CAS  Google Scholar 

  26. K. Lu, J.T. Wang, and W.D. Wei:Scripta Metall. Mater., 1991, vol. 25, pp. 619–23.

    Article  CAS  Google Scholar 

  27. J.A. Eastman: inMulticomponent Ultrafine Microstructures, L.E. McCandlish, D.E. Polk, R.W. Siegel, and B.H. Kear, eds., MRS, Pittsburgh, PA, 1989, vol. 132, pp. 27–34.

    Google Scholar 

  28. U. Cohen, F.B. Koch, and R. Sard:J. Electrochem. Soc, 1983, vol. 130, pp. 1987–95.

    Article  CAS  Google Scholar 

  29. D.S. Lashmore and M.P. Dariel:J. Electrochem. Soc, 1988, vol. 135, pp. 1218–21.

    Article  CAS  Google Scholar 

  30. D.A. Hardwick:Thin Solid Films, 1987, vol. 154, pp. 109–24.

    Article  CAS  Google Scholar 

  31. R. Sundaresan and F.H. Froes:JOM (J. Min. Met. Mater. Soc), 1987, vol. 39 (8), pp. 22–27.

    Article  CAS  Google Scholar 

  32. C.C. Koch:Ann. Rev. Mater. Sci., 1989, vol. 19, pp. 121–43.

    Article  CAS  Google Scholar 

  33. E. Hellstem, H.J. Fecht, Z. Fu, and W.L. Johnson:J. Appl. Phys., 1989, vol. 65, pp. 305–10.

    Article  Google Scholar 

  34. J.S.C. Jang and C.C. Koch:Scripta Metall. Mater., 1990, vol. 24, pp. 1599–1604.

    Article  CAS  Google Scholar 

  35. H.J. Fecht, G. Han, Z. Fu, and W.L. Johnson:J. Appl. Phys., 1990, vol. 67, pp. 1744–48.

    Article  CAS  Google Scholar 

  36. H.J. Fecht, E. Hellstern, Z. Fu, and W.L. Johnson:Metall. Trans. A, 1990, vol. 21A, pp. 2333–37.

    Article  CAS  Google Scholar 

  37. E. Hellstern, H.J. Fecht, C. Garland, and W.L. Johnson: inMulticomponent Ultrafine Microstructures, L.E. McCandlish, D.E. Polk, R.W. Siegel, and B.H. Kear, eds., MRS, Pittsburgh, PA, 1989, vol. 132, pp. 137–42.

    Google Scholar 

  38. E. Hellstern, H.J. Fecht, Z. Fu, and W.L. Johnson:J. Mater. Res., 1989, vol. 4, pp. 1292–95.

    Article  CAS  Google Scholar 

  39. J.S.C. Jang and C.C. Koch:J. Mater. Res., 1990, vol. 5, pp. 498–510.

    Article  CAS  Google Scholar 

  40. T. Christman and M. Jain:Scripta Metall. Mater., 1991, vol. 25, pp. 767–72.

    Article  CAS  Google Scholar 

  41. C.C. Koch and Y.S. Cho: inMaterials with Ultrafine Microstructures, Proc Acta Metall. Conf., Atlantic City, NJ, Oct. 1990, in press.

  42. P.H. Shingu, B. Huang, S.R. Nishitani, and S. Nasu:Suppl. Trans. Jpn. Inst. Met., 1988, vol. 29, pp. 3–10.

    Google Scholar 

  43. W. Schlump and H. Grewe: inNew Materials by Mechanical Alloying Techniques, E. Arzt and L. Schultz, eds., Deutsche Gesellschaft für Metallkunde, Oberursel, Federal Republic of Germany, 1989, pp. 307–18.

    Google Scholar 

  44. C.C. Koch, J.S.C. Jang, and S.S. Gross:J. Mater. Res., 1989, vol. 4, pp. 557–64.

    Article  CAS  Google Scholar 

  45. P.H. Shingu, B. Huang, J. Kuyama, K.N. Ishihara, and S. Nasu: inNew Materials by Mechanical Alloying Techniques, E. Arzt and L. Schultz, eds., Deutsche Gesellschaft für Metallkunde, Oberursel, Federal Republic of Germany, 1989, pp. 319–26.

    Google Scholar 

  46. C. Suryanarayana and F.H. Froes:J. Mater. Res., 1990, vol. 5, pp. 1880–86.

    Article  CAS  Google Scholar 

  47. G.W. Nieman, J.R. Weertman, and R.W. Siegel: inClusters and Cluster-Assembled Materials, R.S. Averback, J. Bernholc, and D.L. Nelson, eds., MRS, Pittsburgh, PA, 1991, vol. 206, pp. 493–98.

    Google Scholar 

  48. G.J. Thomas, R.W. Siegel, and J.A. Eastman:Scripta Metall. Mater., 1990, vol. 24, pp. 201–06.

    Article  CAS  Google Scholar 

  49. H.-E. Schaefer, R. Würschum, R. Birringer, and H. Gleiter:Phys. Rev. B, 1988, vol. B38, pp. 9545–54.

    Article  Google Scholar 

  50. G.W. Nieman, J.R. Weertman, and R.W. Siegel:Scripta Metall., 1989, vol. 23, pp. 2013–18.

    Article  CAS  Google Scholar 

  51. G.W. Nieman, J.R. Weertman, and R.W. Siegel:Scripta Metall. Mater., 1990, vol. 24, pp. 145–50.

    Article  CAS  Google Scholar 

  52. H. Hahn, J.L. Logas, and R.S. Averback:J. Mater. Res., 1990, vol. 5, pp. 609–14.

    Article  CAS  Google Scholar 

  53. H.-E. Schaefer, R. Würschum, R. Birringer, and H. Gleiter:J. Less-Common Met., 1988, vol. 140, pp. 161–69.

    Article  CAS  Google Scholar 

  54. J. Horvath, O.R. Birringer, and H. Gleiter:Solid State Commun., 1987, vol. 62, pp. 319–22.

    Article  CAS  Google Scholar 

  55. R. Birringer, H. Hahn, H. Höfler, J. Karch, and H. Gleiter:Defect Diffusion Data, 1988, vol. 59, pp. 17–32.

    Article  Google Scholar 

  56. S. Schumacher, R. Birringer, R. Strauss, and H. Gleiter:Acta Metall., 1989, vol. 37, pp. 2485–88.

    Article  CAS  Google Scholar 

  57. R. Kirchhiem, T. Mütschele, W. Kieninger, H. Gleiter, R. Birringer, and T.D. Koble:Mater. Sci. Eng., 1988, vol. 99, pp. 457–62.

    Article  Google Scholar 

  58. R. Bohn, T. Haubold, R. Birringer, and H. Gleiter:Scripta Metall. Mater., 1991, vol. 25, pp. 811–16.

    Article  CAS  Google Scholar 

  59. D. Korn, A. Morsch, R. Birringer, W. Arnold, and H. Gleiter:J. Phys. (Paris), 1988, vols. 49, colloq. 5, pp. 769–79.

    Google Scholar 

  60. M. Weiler, J. Diehl, and H.-E. Schaefer:Phil. Mag. A, in press.

  61. G.W. Nieman, J.R. Weertman, and R.W. Siegel:J. Mater. Res., 1991, vol. 6, pp. 1012–27.

    Article  CAS  Google Scholar 

  62. G.W. Nieman, J.R. Weertman, and R.W. Siegel: inClusters and Cluster-Assembled Materials, R.S. Averback, J. Bernholc, and D.L. Nelson, eds., MRS, Pittsburgh, PA, 1991, vol. 206, pp. 581–86.

    Google Scholar 

  63. G.D. Hughes, S.D. Smith, C.S. Pande, H.R. Johnson, and R.W. Armstrong:Scripta Metall., 1986, vol. 20, pp. 93–97.

    Article  CAS  Google Scholar 

  64. HJ. Höfler and R.S. Averback:Scripta Metall. Mater., 1990, vol. 24, pp. 2401–06.

    Article  Google Scholar 

  65. A.H. Chokshi, A. Rosen, J. Karch, and H. Gleiter:Scripta Metall., 1989, vol. 23, pp. 1679–84.

    Article  CAS  Google Scholar 

  66. E.O. Hall:Proc. Phys. Soc. (London), 1951, vol. B64, pp. 747–53.

    Article  CAS  Google Scholar 

  67. N.J. Petch:J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.

    CAS  Google Scholar 

  68. A. Lasalmonie and J.L. Strudel:J. Mater. Sci., 1986, vol. 21, pp. 1837–52.

    Article  CAS  Google Scholar 

  69. V.G. Gryaznov, V.A. Solov’ev, and L.I. Trusov:Scripta Metall. Mater., 1990, vol. 24, pp. 1529–34.

    Article  Google Scholar 

  70. T.G. Nieh and J. Wadsworth:Scripta Metall. Mater., 1991, vol. 25, pp. 955–58.

    Article  CAS  Google Scholar 

  71. C. Suryanarayana, D. Mukhopadhyay, S.N. Patankar, and F.H. Froes:J. Mater. Res., in press.

  72. G. Palumbo, S.J. Thorpe, and K.T. Aust:Scripta Metall. Mater., 1990, vol. 24, pp. 1347–50.

    Article  CAS  Google Scholar 

  73. G. Palumbo, U. Erb, and K.T. Aust:Scripta Metall. Mater., 1990, vol. 24, pp. 2347–50.

    Article  CAS  Google Scholar 

  74. V.B. Rabukhin:Phys. Met. Metall., 1986, vol. 61, p. 149.

    Google Scholar 

  75. M.J. Luton, C.S. Jayanth, M.M. Disko, S. Matras, and J. Vallone: inMulticomponent Ultrafine Microstructures, L.E. McCandlish, D.E. Polk, R.W. Siegel, and B.H. Kear, eds., MRS, Pittsburgh, PA, 1989, vol. 132, pp. 79–86.

    Google Scholar 

  76. L.S. Palatnik, A.I. Il’inskii, and N.P. Sapelkin:Soviet Phys.-Solid State, 1987, vol. 8, pp. 2016–17.

    Google Scholar 

  77. J.S. Koehler:Phys. Rev. B., 1970, vol. 2, pp. 547–51.

    Article  Google Scholar 

  78. S.L. Lehoczky:J. Appl. Phys., 1978, vol. 49, pp. 5479–85.

    Article  CAS  Google Scholar 

  79. S.L. Lehoczky:Phys. Rev. Lett., 1978, vol. 41, pp. 1814–18.

    Article  CAS  Google Scholar 

  80. D. Tench and J. White:Metall. Trans A, 1984, vol. 15A, pp. 2039–40.

    Article  CAS  Google Scholar 

  81. K. Yoshii, H. Takagi, M. Umeno, and H. Kawabe:Metall. Trans. A, 1984, vol. 15A, pp. 1273–80.

    Article  CAS  Google Scholar 

  82. A. Kelly:Phil. Trans. R. Soc. London, 1987, vol. A322, pp. 409–23.

    Article  Google Scholar 

  83. S. Menezes and D. Anderson: Electrochemical Society Meeting, Chicago, IL, 1988, Abstract 342.

  84. A.W. Ruff and N.K. Myshkin:J. Tibol., 1989, vol. 111, pp. 156–60.

    Article  CAS  Google Scholar 

  85. A.W. Ruff, N.K. Myshkin, and Z.X. Wang:Proc. Int. Conf. on Engineered Materials for Advanced Friction and Wear Applications, ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 41–46.

    Google Scholar 

  86. A.W. Ruff and Z.X. Wang:Wear, 1989, vol. 131, pp. 259–72.

    Article  CAS  Google Scholar 

  87. R.C. Cammarata:Scripta Metall., 1986, vol. 20, pp. 479–86.

    Article  CAS  Google Scholar 

  88. T. Tsakalakos and A.F. Jankowski:Ann. Rev. Mater. Sci., 1986, vol. 16, pp. 293–313.

    Article  CAS  Google Scholar 

  89. T. Tsakalakos and A.F. Jankowski: inMulticomponent Ultrafine Microstructures, L.E. McCandlish, D.E. Polk, R.W. Siegel, and B.H. Kear, eds., MRS, Pittsburgh, PA, 1989, vol. 132, pp. 199–212.

    Google Scholar 

  90. W.M.C. Yang, T. Tsakalakos, and J.E. Hilliard:J. Appl. Phys., 1977, vol. 48, pp. 876–79.

    Article  CAS  Google Scholar 

  91. G.E. Henein and J.E. Hilliard:J. Appl. Phys., 1983, vol. 54, pp. 728–33.

    Article  CAS  Google Scholar 

  92. T. Tsakalakos and J.E. Hilliard:J. Appl. Phys., 1983, vol. 54, pp. 734–37.

    Article  CAS  Google Scholar 

  93. D. Baral, J.B. Ketterson, and J.E. Hilliard:J. Appl. Phys., 1985, vol. 57, pp. 1076–83.

    Article  CAS  Google Scholar 

  94. B.M. Clemens and G.L. Eesley:Phys. Rev. Lett., 1988, vol. 61, pp. 2356–59.

    Article  CAS  Google Scholar 

  95. A. Kueny, M. Grimsditch, K. Miyano, I. Banerjee, C.M. Falco, and I.K. Schuller:Phys. Rev. Lett., 1982, vol. 48, pp. 166–70.

    Article  CAS  Google Scholar 

  96. M.R. Khan, C.S.L. Chung, G.P. Flecher, M. Grimsditch, A. Kueny, CM. Falco, and I.K. Schuller:Phys. Rev. B., 1982, vol. 27, pp. 7186–93.

    Article  Google Scholar 

  97. D. Tench: Rockwell International, Thousand Oaks, CA, private communication, May 1989.

  98. P.C. Clapp:Modulated Structure Materials, NATO-ASI Series, Applied Sciences, T. Tsakalakos, ed., Martinus-Nijhoff, Dordrecht, The Netherlands, 1985, pp. 455–64.

    Google Scholar 

  99. A.F. Jankowski and T. Tsakalakos:J. Phys. F, Metal Phys., 1985, vol. 15, pp. 1279–92.

    Article  Google Scholar 

  100. W.L. Johnson:Prog. Mater. Sci., 1986, vol. 30, pp. 81–134.

    Article  CAS  Google Scholar 

  101. R.C. Cammarata and K. Sieradzki:Phys. Rev. Lett., 1989, vol. 62, pp. 2005–08.

    Article  CAS  Google Scholar 

  102. M.D. Merz and S.D. Dahlgren:J. Appl. Phys., 1975, vol. 46, pp. 3235–37.

    Article  CAS  Google Scholar 

  103. R.W. Springer and D.S. Catlett:Thin Solid Films, 1978, vol. 54, pp. 197–205.

    Article  CAS  Google Scholar 

  104. R.F. Bunshah, R. Nimmagadda, H.J. Doerr, B.A. Movchan, N.I. Grechanuk, and E.V. Dabizha:Thin Solid Films, 1980, vol. 72, pp. 261–75.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institute for Materials and Advanced Processes, University of Idaho, 83843-4195, Moscow, ID

    C. Suryanarayana (Professor) & F. H. Froes (Director)

Authors
  1. C. Suryanarayana
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. F. H. Froes
    View author publications

    You can also search for this author in PubMed Google Scholar

Additional information

This invited overview is based on a presentation made in the symposium “Structure and Properties of Fine and Ultrafine Particles, Surfaces and Interfaces” presesnted as part of the 1989 Fall Meeting of TMS, October 1–5, 1989, in Indianapolis, IN, under the auspices of the Structures Committee of ASM/MSD.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Suryanarayana, C., Froes, F.H. The structure and mechanical properties of metallic nanocrystals. Metall Trans A 23, 1071–1081 (1992). https://doi.org/10.1007/BF02665039

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02665039

Keywords

Search

Navigation